1868 Arica earthquake

1868 Arica earthquake

Lima Arica
Date	13 August 1868 (1868-08-13)
Magnitude	8.5–9.0 Mw
Epicenter
Areas affected	Peru and parts of what is now northern Chile
Casualties	25,000+

File:Arica after the earthquake (1868).JPG

Arica after the earthquake and tsunami

File:USS Wateree (1863).jpg

The USS Wateree beached at Arica, 430 yards (390 m) inland

File:Arica Peru 1868.jpg

Sketches of Arica after the earthquake and tsunami from the Illustrated London News

The 1868 Arica earthquake occurred on 13 August 1868, near Arica, then part of Peru, now part of Chile, at 21:30 UTC. It had an estimated magnitude between 8.5 and 9.0. A tsunami (or multiple tsunamis) in the Pacific Ocean was produced by the earthquake, which was recorded in Hawaii, Japan, Australia, and New Zealand.

Tectonic setting

The earthquake occurred along the boundary between the Nazca Plate and the South American Plate. The earthquake was likely a result of thrust-faulting, caused by the subduction of the Nazca plate beneath the South American plate.

The coasts of Peru and Chile have a history of great megathrust earthquakes originating from this plate boundary, such as the 1960 Valdivia earthquake and the 2010 Maule earthquake.

Damage

The earthquake caused almost complete destruction in the southern part of Peru, including Arica, Tacna, Moquegua, Mollendo, Ilo, Iquique, Torata and Arequipa, resulting in an estimated 25,000 casualties.

The tsunami drove three ships anchored in port nearly 800 m (2,600 ft) inland: the 1560-ton Peruvian corvette America, the U.S. gunboat Wateree and the U.S. store ship Fredonia, which was completely destroyed. The English brig Chañarcillo and two Chilean schooners, Rosa Rivera and Regalon, were also lost. The port city of Pisco was razed.

The tsunami caused considerable damage in Hawaii, washing out a bridge along the Waiohi river. In New Zealand, substantial damage occurred on the Chatham Islands and the Banks peninsula with a Maori village and two houses washed away and boats damaged, and one death was recorded.

Characteristics

Earthquake

Two separate earthquakes have been described; they may both refer to the same event.

The earthquake was felt over a wide area, up to 1,400 km (870 mi) to the northwest in Samanco, Peru and 224 km (139 mi) to the east in Bolivia. Estimates of its magnitude range from 8.5 to 9.0. A 600 km (370 mi) rupture length has been estimated from the pattern of isoseismals making it one of the largest fault breaks in modern times.

About 400 aftershocks were recorded by 25 August of that year.

Contemporary accounts say that the earthquake shaking lasted somewhere between five to ten minutes.

Tsunami

Although this event generated a tsunami that was noted across the Pacific, most of the associated damage was localised along the coasts of southern Peru and what is now northernmost Chile. The first wave arrived at Arica 52 minutes after the earthquake, with a 12 m (39 ft) height, followed by the largest 16 m (52 ft) wave 73 minutes later.

Future risk

In 2001 the Arica area was identified as forming part of a seismic gap between 15° and 24°S, with no major earthquake since 1877. In accordance with this theory a major earthquake was considered likely to happen in the near future. More specifically, in 2005 a magnitude 8.6 event was forecast for the northern Chile part of the gap, the location of the subsequent 2014 Iquique earthquake. An earthquake affecting the same sector of the plate boundary as the 1868 event with a magnitude of 8.8 was also forecast as likely to occur by 2126. A repeat of the 1868 event would probably cause more casualties, because of the increase of population in areas at risk.

See also

• 1877 Iquique earthquake
• 2014 Iquique earthquake