2008 Iwate–Miyagi Nairiku earthquake

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
2008 Iwate–Miyagi Nairiku earthquake
Matsurube Ohashi(bridge).JPG
USGS ShakeMap 2008tfdp.jpg
Date June 14, 2008 (2008-06-14) (JST)
Magnitude Mj 7.2 (JMA scale), Mw 6.9 (by USGS)
Depth 8 kilometres (5 mi) (JMA), 10 kilometres (6 mi) (USGS)
Epicenter Lua error in package.lua at line 80: module 'strict' not found.
(Iwate Prefecture)
Type ReverseIntraplate
Areas affected Japan / Tōhoku region
Peak acceleration 4.36 g (vector sum)
Tsunami none
Aftershocks 483 felt aftershocks by July 1 (JMA)[1]
Largest: Mj 5.7 on June 14 ( 9:20 JST)
Casualties at least 12 dead, 436 injured (As of 2008-07-01 17:00 JST)

The 2008 Iwate earthquake on June 14, 2008 mainly struck mid Tōhoku region, northeastern Honshū, Japan.[2] Japan Meteorological Agency (JMA) officially named this earthquake the Iwate–Miyagi Nairiku earthquake in 2008 (平成20年(2008年)岩手・宮城内陸地震?).[3]

This earthquake occurred in the south of the inland of Iwate Prefecture at 8:43 JST on Saturday morning, June 14 (23:43 UTC on June 13).[4] The JMA magnitude was estimated at Mj 7.2,[4] and the moment magnitude by USGS was at Mw 6.9.[5] The epicenter was located at Lua error in package.lua at line 80: module 'strict' not found.,[4] about 85 kilometres (55 mi) north of Sendai and about 385 kilometres (240 mi) north-northeast of Tokyo.[6]

The strongest shaking was measured in the cities of Ōshū (Iwate) and Kurihara (Miyagi), both of which were measured as "strong 6" on the Japan Meteorological Agency seismic intensity scale, shindo (震度 shindo?).[2] Peak ground acceleration readings were high, with a maximum vector sum (3 component) value of 4278 cm/s2 (4.36g).[7]

Intensity

Seismic intensity (震度 Shindo?) represents the strength of ground motion. JMA uses the scales of 0 to 7: 0, 1, 2, 3, 4, weak/strong 5, weak/strong 6, 7.

Prefecture Seismic intensities
Iwate 6+ 6- 5+ 5- 4 3 2
Miyagi 6+ 6- 5+ 5- 4 3
Akita 5+ 5- 4 3 2
Yamagata 5- 4 3 2
Fukushima 5- 4 3 2 1
Aomori 4 3 2 1
Ibaraki 4 3 2
Tochigi 4 3 2 1
Niigata 4 3 2 1
Hokkaidō 3 2 1
Gunma 3 2 1
Saitama 3 2 1
Chiba 3 2 1
Tokyo 3 2 1
Kanagawa 3 2 1
Yamanashi 3 2 1
Ishikawa 2 1
Nagano 2 1
Shizuoka 2 1
Aichi 1

Tremors were felt across a large area.[2]

Strongly shaken areas included:[2]

Strong 6:

Iwate Pref. - City of Ōshū (奥州市).
Miyagi Pref. - City of Kurihara (栗原市).

Weak 6:

Iwate Pref. - City of Ōshū (奥州市).
Miyagi Pref. - Cities of Kurihara (栗原市) and Ōsaki (大崎市).

Strong 5:

Iwate Pref. - Cities of Ōshū (奥州市), Kitakami (北上市), Ichinoseki (一関市), Towns of Kanegasaki (金ケ崎町) and Hiraizumi (平泉町).
Miyagi Pref. - Cities of Kurihara (栗原市), Ōsaki (大崎市), Sendai (仙台市), Tome (登米市), Natori (名取市), Towns of Misato (美里町), Wakuya (涌谷町), Kami (加美町), and Rifu (利府町).
Akita Pref. - City of Yuzawa (湯沢市), and Village of Higashinaruse (東成瀬村).

Tectonics

According to the USGS:[5]

The Mw 6.8 Honshu earthquake of June 13th 2008 occurred in a region of convergence between the Pacific Plate and the Okhotsk section of the North American Plate in northern Japan, where the Pacific plate is moving west-northwest with respect to North America at a rate of approximately 8.3 cm/yr. The hypocenter of the earthquake indicates shallow thrusting motion in the upper (Okhotsk) plate, above the subducting Pacific plate, which lies at approximately 80 km depth at this location.

The earthquake occurred in a region of upper-plate contraction, probably within the complicated tectonics of the Ou Backbone Range, known to have hosted several large earthquakes in historic times. The largest of these events occurred in 1896, approximately 70km north of the June 13th event, and killed over 200 people in the local area.

Aftershocks

According to JMA:[1][8][9]

Aftershocks of this earthquake were stronger than the Great Hanshin earthquake in 1995, but they happened much less frequently.

Over 200 aftershocks were observed in the first 24 hours, with about 400 in total over the first seven days. The largest ones (with Mj5.0 or greater) were

June 14, 9:20: Mj5.7: Max. seismic intensity reached Strong 5;
June 14, 12:27: Mj5.2: Max. seismic intensity reached 4;
June 16, 23:14: Mj5.3: Max. seismic intensity reached 4.

From June 21 to July 1, four to 12 aftershocks were observed each day, with maximum seismic intensities of 3.

Effects

External video
video icon Original NHK broadcast of the earthquake warning on YouTube

Landslides

Landslides triggered by this earthquake crushed structures, buried people, cut off access to certain roads, and isolated some rural communities.[10] Mud from landslides dammed up rivers to form lakes called "quake lakes" (せき止め湖 sekitomeko?).[11]

By June 19, the Ministry of Land had identified fifteen quake lakes in Iwate and Miyagi prefectures,[12] and work crews began draining three of them which were at high risk of overflow or breach from rain or aftershocks.[13][14]

Human casualties

By 17:50 JST, June 25, twelve people were confirmed dead and 358 injured, and ten still missing.[15]

  • In City of Kurihara, Miyagi Pref., five people were buried in a landslide at a hot-spring inn called Komanoyu, which had stood on the mountainside of Mt. Kurikoma.[15][16] A woman aged 80 who had co-managed the inn with her husband, her 58-year-old son, a woman aged 75 who had worked at the inn, a 48-year-old tourism consultant, and an attendant of the Railway Museum aged 35 were all killed in the landslide.[17][18][19]
  • In the city of Kurihara, along Route 398, a landslide overwhelmed and killed three workers setting a rockfall containment net on a hillside.[15][20][21][22]
  • Also in the city of Kurihara, along Route 398, a 59-year-old man was killed when his car was carried away by a landslide and buried.[15][23]
  • At a dam construction site in the city of Ōshū, Iwate Pref., a worker aged 48 was struck by falling rocks and died.[15][20]
  • In the city of Ichinoseki, Iwate Pref., a person surprised by the tremor ran out into the road and was fatally struck by a truck.[15][20]
  • In the city of Iwaki, Fukushima Pref., near a fishing port, a person aged 55 was struck by falling rocks while fishing, fell into the sea, and drowned.[15][20]
  • In the city of Ōshū, a landslide caused a group of 20 people to become temporarily trapped in an overturned bus.[24] Eight of them were injured,[15] including one critically and five seriously.[25] The bus was running when overturned, and ten passengers escaped, prompted by the driver. Then an aftershock caused the bus to slip down slowly into a ravine until it was caught on some trees.[25] One of the passengers who had escaped walked down the road with a mobile phone until he was able to get a signal, and made an emergency call.[25]

Electric power supply

No nuclear power plants were shut down following this earthquake[26] unlike the 2007 Chūetsu offshore earthquake quake. Some water was found to have splashed out of a reaction container in the Fukushima II Nuclear Power Plant possibly due to the tremor, but no radioactive material was released to the environment.[26][27]

Expressways and railways

Expressways in Tōhoku region were closed in several sections, but all reopened by nighttime, barring traffic restrictions in one section for repair work.[28]

Some train services by JR East were suspended on Shinkansen and local lines, and resumed on the following day from the first scheduled trains.[29]

On Tōhoku Shinkansen, all running trains, about 20, were stopped by an earthquake detection system. Most were soon moved to the nearest stations.[30] However, about 2,000 passengers were temporarily trapped inside three trains[31] before being evacuated[30] up to nine and a half hours later,[32] because the trains were forced to stay in place while equipment inspections were carried out.[30]

Suspensions on Tōhoku, Akita, Yamagata Shinkansen and delays on Jōetsu, Nagano Shinkansen reportedly involved 117,000 passengers.[32] No trains derailed.[31]

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.As of 2008-07-02 ( 5:00 JST) .(Japanese)
  2. 2.0 2.1 2.2 2.3 Result of searching the database of felt earthquakes run by Japan Meteorological Agency.(Japanese) Archived 19 March 2011 at WebCite
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.Retrieved on 2008-06-18 (10:30 UTC).(English)
  6. Calculation tool: "距離と方位角の計算", offered by Geographical Survey Institute. Retrieved on 2008-06-18.(Japanese)
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.Last updated on 2008-06-15 (9:55 JST).(Japanese)
  11. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. (This article will remain less than a month.) Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 15.2 15.3 15.4 15.5 15.6 15.7 Lua error in package.lua at line 80: module 'strict' not found.As of 2008-06-25 (17:50 JST).(Japanese)
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. 20.0 20.1 20.2 20.3 Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. 25.0 25.1 25.2 Lua error in package.lua at line 80: module 'strict' not found.Last updated on 2008-06-14 (21:04 JST).(Japanese)
  26. 26.0 26.1 Lua error in package.lua at line 80: module 'strict' not found.As of 2008-06-14 (17:00 JST).(Japanese)
  27. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.Last updated on 2008-06-15 (21:05 JST).(Japanese)
  30. 30.0 30.1 30.2 Lua error in package.lua at line 80: module 'strict' not found.
  31. 31.0 31.1 Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  32. 32.0 32.1 Lua error in package.lua at line 80: module 'strict' not found.Last updated on 2008-06-15 (0:27 JST).(Japanese)