2013 Solomon Islands earthquake

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
2013 Solomon Islands earthquake
2013 Solomon Islands earthquake is located in Oceania
2013 Solomon Islands earthquake
Date 6 February 2013 (2013-02-06)
Magnitude 8.0 Mw
Depth 24 km (15 mi)
Epicenter Lua error in package.lua at line 80: module 'strict' not found.
Type Megathrust
Areas affected Solomon Islands
Max. intensity VIII (Severe)
Tsunami Yes
Aftershocks 20
Casualties 9 dead, 5 missing, 17 injured

The 2013 Solomon Islands earthquake struck northeast of Australia on 6 February with a moment magnitude of 8.0 and a maximum Mercalli intensity of VIII (Severe). Its epicenter was the Solomon Islands, at the boundaries of the Australian and Pacific tectonic plates, causing local evacuations and a tsunami of 1.5 m (4.9 ft) and killing at least nine people.

Tectonic setting

The Santa Cruz and Solomon Islands are located on the plate boundary between the Australian and Pacific plate. This highly seismic region has “near 90° bend in the boundary…"[1] This area experiences much plate movement as the Santa Cruz Island “has upper plate strike-slip and normal faulting, plate boundary under-thrusting, outer rise extensional faulting, and intraplate faulting” and the Solomon Islands are located on the subduction zone of the two boundaries.[1] On February 6, 2013, the largest under-thrusting earthquake ever to be recorded in that area caused a tsunami and both were destructive to the area. Major villages on both groups of islands, Lata and Nendö were destroyed and at least 724 homes were confirmed as damaged.

Earthquake

On 6 February 2013, at 12:12 local time (01:12 UTC) an earthquake struck the Solomon Islands, located in the south Pacific Ocean.[2] The epicenter was 76 kilometres (47 mi) west of Lata on Nendo Island.[2] The earthquake occurred due to the interaction between the Australian Plate and the Pacific Plate, and was preceded by dozens of foreshocks in the region.[2] The magnitude of this earthquake was put at 8.0 on the moment magnitude scale.[2] At least 20 aftershocks were reported,[3] including one measuring 7.1[4] on 8 February and two measuring M7.0.[5] “This event had a shallow dipping thrust faulting mechanism…” and “…produced a tsunami of ~ 1.5 height” on the Santa Cruz Islands.[1] Toward the end of the week before February 6, the area was very active and there were many magnitude 6 earthquakes that occurred in the area.

The closest island to the epicenter, Nendo and its largest city, Lata were said to experience the largest amount of shaking. Even though there were aftershock earthquakes of magnitude 6, the most worrisome affect of the earthquake was the potential tsunami. As the wait for the tsunami continued, many villages had already been destroyed. For example, earthquake shaking destroyed many villages to the west and south of Lata, on the coastline, before the tsunami had even arrived. Many Pacific countries had ordered evacuations, as their authorities did not have to take any risks. Even countries that were not on the warning list were being evacuated. Residents of the Solomon Islands and other surrounding islands were working their way to higher ground. Major traffic jams were caused in Honiara, the capital city of Solomon Islands as people were attempting to get away from the coming wave. After the mainshock, the epicenter area was hit by 13 aftershocks greater than magnitude 5.”

The earthquake was formed on the boundary between the Pacific and Australian plates. This area has very complicated faulting patterns that are very close to the Solomon Island arcs and Vanuatu Island arcs. The area is used to high frequency, low to moderate intensity seismic activity.[1] However, many of the “larger events recorded have involved intraplate and interplate earthquakes with magnitudes up to about 8.0, several of which were located near the abrupt bends in the arcs.[1] The Solomon Islands appear to have more seismic activity than the other areas earthquake productivity than most areas. The area also seems to produce more earthquake “doublets” and “triplets,” a deviation from the normal earthquake aftershock in which a second and sometimes third earthquake can be produced from the aftershock of the first earthquake.[6] This occurs rarely, maybe once or twice a year, making this area a unique seismic area.

Damage

File:Venga Village (10680804884).jpg
Tsunami damage in Venga village

In Honiara, the capital of the Solomon Islands, residents evacuated to higher ground,[7] causing traffic jams.[8] Local news agencies reported that four villages were destroyed.[3] Houses were flooded in eastern Temotu Province.[5] On Santa Cruz Island, 1.5 m (4.9 ft) waves damaged 50 buildings.[9] In Lata, the tsunami damaged the airport and flooded low-lying areas,[10] killing nine people, five of them elderly and one a child.[11] More than 100 houses on the island were damaged, and the water and electricity services were interrupted.[12] It was reported that almost all houses in Nela village were washed away, and some homes in Venga village were shifted by water.[13] Officials in Noumea ordered residents to evacuate along the eastern coast of New Caledonia and nearby Loyalty Islands.[14] Residents also evacuated to higher ground in Suva, the capital of Fiji.[3] The earthquake killed 9 people, and 5 people remain listed as missing.[11]

Tsunami

The Pacific Tsunami Warning Center issued a tsunami warning for the Solomon Islands, Papua New Guinea, Fiji,[15] and several other islands in the region; the agency also issued a tsunami watch for Australia, New Zealand and eastern Indonesia.[7][16] The earthquake produced a tsunami measuring 1 metre (3 ft 3 in) at Lata, Solomon Islands,[7][16] that reached about 500 m (1,600 ft) inland.[3] Smaller tsunamis of 11 cm (4.3 in) and 50 cm (20 in) were reported in Vanuatu and New Caledonia, respectively.[8]

Recovery

85% of the people on these islands live a subsistence lifestyle.[17] That means that major loss of biodiversity, like that caused by both the earthquake and tsunami, can lead to “hunger, poverty, disease, and conflict and is a threat to internal security…” to both islands.[17] The ecosystems in both of these islands are already being threatened by things like invasive species, major loss of costal land, and overharvesting. This is because the population is growing and they need more resources to survive. The population is growing about 4.4% annually and as it grows, the people must use more of their natural resources as food and shelter.[17] There are many human elements that affect the ecosystem and how both the Santa Cruz and Solomon Islands will recover from the natural disasters. Firstly, both sets of islands are guilty of destroying their land by overharvesting and slowly depleting their biodiversity. Though it was once one of the most diverse ecosystems in the world, very little attention is given to biodiversity and environmental conservation.[17]

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.0 11.1 Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. 16.0 16.1 Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 17.2 17.3 Lua error in package.lua at line 80: module 'strict' not found.

External links