2182 kHz

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The radio frequency 2 182 kHz is one of the international calling and distress frequency for maritime radiocommunication on a frequency band allocated to the MOBILE SERVICE on primary basis, exclusively for distress and calling operations.[1]

Transmission modes

Transmissions on 2182 kHz commonly use single-sideband modulation (SSB) (upper sideband only). However, amplitude modulation (AM) and some variants such as vestigial sideband are still in use, mainly by vessels with older equipment and by some coastal stations in an attempt to ensure compatibility with older and less sophisticated receivers.

Frequency allocation 2 173.5–2 190.5 kHz
Allocation to services
Region 1      Region 2           Region 3     
2 173.5–2 190.5 kHz
MOBILE SERVICE (distress and calling)

Range

2182 kHz is analogous to channel 16 on the marine VHF band, but unlike VHF which is limited to ranges of about 20 to 50 nautical miles (40 to 90 km) depending on antenna height,[2] communications on 2182 kHz and nearby frequencies have a reliable range of around 50 to 150 nautical miles (90 to 280 km) during the day and 150 to 300 nautical miles (280 to 560 km) or sometimes more at night.[3] The reception range of even a well-equipped station can be severely limited in summer because of static caused by lightning.

Silence period

File:Radioroom.png
Ship's radio room clock

All stations using 2182 kHz were required to maintain a strictly enforced three-minute silence and listening period twice each hour, starting at h+00, h+30. This allowed any station with distress, urgent or safety traffic the best chance of being heard at that time, even if they were at some distance from other stations, operating on reduced battery power or perhaps reduced antenna efficiency, as for example from a dismasted vessel. As a visual aide-memoire, a typical clock in a ship's radio room would have these silence periods marked by shading the sectors from h+00 to h+03 and from h+30 to h+33 in green. Similar sectors were marked in red for what used to be the corresponding silence and listening period on 500 kHz between h+15 and h+18 and from h+45 to h+48.[4] These silence periods are no longer required as the introduction of GMDSS has produced alternative automatic watchkeeping systems and the 500 kHz band is no longer in use for maritime traffic.

Licensing

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In order to operate a marine radio transmitter on 2182 kHz, the operator must hold a GMDSS General Operating Certificate for mandatory installations, a Long Range Certificate for voluntary ones, or other equivalent and recognised radio operator's qualifications. Both these certificates have a wider syllabus than those of the GMDSS Restricted Operators Course or the RYA Short Range Certificate that is necessary for marine VHF use. In practice, an unqualified operator would not be prosecuted for the use of either transmitter in what turns out to be a genuine distress situation.

Related distress frequencies

2182 kHz forms an essential part of the Global Maritime Distress Safety System (GMDSS). It has an associated DSC frequency at 2187.5 kHz. Other international distress frequencies, in use as of 2008, include:

Discontinued frequencies

  • 500 kHz Morse code is no longer monitored.
  • 121.5 or 243 MHz locators. (No longer automatically monitored by satellite, though still used for aircraft communication and short-range direction finding.)[5]
  • Effective 1 August 2013, the U. S. Coast Guard terminated its radio guard of the international voice distress, safety and calling frequency 2182 kHz and the international digital selective calling (DSC) distress and safety frequency 2187.5 kHz. Additionally, marine information and weather broadcasts transmitted on 2670 kHz terminated concurrently.[6]

See also

References

  1. http://www.jproc.ca/rrp/distress.html Distress Communications, RADIO COMMUNICATIONS AND SIGNALS INTELLIGENCE IN THE CANADIAN NAVY
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. http://www.piersystem.com/go/doc/780/248571/ United States Coast Guard, Press Release
  6. Lua error in package.lua at line 80: module 'strict' not found.

External links