Atomic vapor laser isotope separation

From Infogalactic: the planetary knowledge core
(Redirected from AVLIS)
Jump to: navigation, search
An atomic vapor laser isotope separation experiment at LLNL. Green light is from a copper vapor pump laser used to pump a highly tuned dye laser which is producing the orange light.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

"AVLIS" redirects here. For the Dungeons & Dragons campaign setting, see Avlis.

Atomic vapor laser isotope separation (AVLIS) is a method by which specially tuned lasers are used to separate isotopes of uranium using selective ionization of hyperfine transitions.[1][2]

In the largest technology transfer in U.S. government history, in 1994 the AVLIS process was transferred to the United States Enrichment Corporation for commercialization. However, on June 9, 1999 after a $100 million investment, USEC cancelled its AVLIS program.

The AVLIS process provides high energy efficiency comparable with gas centrifuges, high separation factor, and low volume of radioactive waste.

AVLIS continues to be developed by some countries and it presents some specific challenges to international monitoring.[3] Iran is now known to have had a secret AVLIS program. However, since it was uncovered in 2003, Iran has claimed to have dismantled it.[4][5]

A similar technology, using molecules instead of atoms, is molecular laser isotope separation (MLIS).

Principle

The absorption lines of 235U and 238U differ slightly due to hyperfine structure; for example, the 238U absorption peak shifts from 502.74 nanometers to 502.73 nm in 235U. AVLIS uses tunable dye lasers, which can be precisely tuned, so that only 235U absorbs the photons and selectively undergoes excitation and then photoionization. The ions are then electrostatically deflected to a collector, while the neutral unwanted uranium-238 passes through.

The AVLIS system consists of a vaporizer and a collector, forming the separation system, and the laser system. The vaporizer produces a stream of pure gaseous uranium.

The laser commonly used is a two-stage tunable pulsed dye laser usually pumped by a copper vapor laser;[6][7][8] the master oscillator is low-power but highly precise, and its power is increased by a dye laser amplifier acting as optical amplifier. Three frequencies ("colors") of lasers are used for full ionization of uranium-235.[9]

See also


References

  1. ↑ L. J. Radziemski, R. W. Solarz, and J. A. Paisner (Eds.), Laser Spectroscopy and its Applications (Marcel Dekker, New York, 1987) Chapter 3.
  2. ↑ Petr A. Bokhan, Vladimir V. Buchanov, Nikolai V. Fateev, Mikhail M. Kalugin, Mishik A. Kazaryan, Alexander M. Prokhorov, Dmitrij E. Zakrevskii: Laser Isotope Separation in Atomic Vapor. Wiley-VCH, Berlin, August 2006, ISBN 3-527-40621-2
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ F. J. Duarte and L.W. Hillman (Eds.), Dye Laser Principles (Academic, New York, 1990) Chapter 9.
  7. ↑ C. E. Webb, High-power dye lasers pumped by copper vapor lasers, in High Power Dye Lasers, F. J. Duarte (Ed.) (Springer, Berlin, 1991) Chapter 5.
  8. ↑ F. J. Duarte, Tunable lasers for atomic vapor laser isotope separation: the Australian contribution, Australian Physics 47(2), 38-40 (2010).
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Atomic_vapor_laser_isotope_separation&oldid=3321158"