Anoa (armoured personnel carrier)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pindad APS-3 "Anoa" 6x6
Pindad Panser1.jpg
3D render of current production model of the Anoa.
Type Armoured personnel carrier
Place of origin Indonesia
Service history
In service 2009–Present (Indonesian service)
Used by See Operators
Wars UNIFIL
Production history
Designer Pindad
Designed 2006
Manufacturer Pindad
Produced 2008–Present
Number built 226 as 2014[1]
Variants See Variants
Specifications
Weight 11 tonnes, 14 tons (combat)
Length 6 m
Width 2.5 m
Height 2.5 m / 2.9 m (FSV variant)
Crew 3 + 10 passengers

Armor Monocoque Armoured, STANAG 4569 level 3
Main
armament
12.7 mm MG, CIS 40 AGL
Secondary
armament
2x3 66 mm smoke grenade launcher
Engine Renault MIDR 062045 inline 6 cylinder turbo-charged diesel, Behr cooling pack
320Hp, 2500 Rpm
Power/weight 22,85 HP/ton
Transmission Automatic, ZF S6HP502, 6 forward, 1 reverse
Suspension Independent suspension, torsion bar
Ground clearance 40 cm
Fuel capacity 200 litres
Operational
range
600 km
Speed 90 km/h

The Anoa is a 6x6 armoured personnel carrier developed by PT Pindad of Indonesia. The vehicle is named after the Anoa, which is a type of buffalo indigenous to Indonesia. The prototype was first unveiled at the 61st anniversary of TNI on October 5, 2006 in TNI HQ at Cilangkap, east of capital Jakarta.[2][3] The Anoa resembles the French VAB,[4] which is also in service with Indonesia.[5]

History

The Anoa had been officially unveiled to the public under the designation APS-3 (Indonesian: Angkut Personel Sedang, English: Medium Personnel Carrier) at the Indo Defence & Aerospace 2008 exhibition on November 19, 2008[6] to November 22, 2008[7] after being shown in a TNI parade on October 5, 2008.[8] On August 30, 2008, 10 APS-3s have been produced[9] with the plan of having 150 vehicles to be produced for the Indonesian Army[10][11] in time for their first deployment in 2009.[12]

20 of the Pansers were handed over to the Indonesian government through the Defense Ministry, part of a deal from the initial 150 vehicles to 40 due to the economic crisis.[13] 40 Pansers were delivered as part of PT Pindad's commitment to the total delivery of 154 Pansers.[14] 33 Pansers were eventually submitted to the Ministry of Defence on January 13, 2010.[15] Pindad had received loans from state-owned Bank Mandiri, Bank BNI 46 and Bank BRI as part of payments for the manufacture of the Pansers.[13]

The Anoas were officially placed into Indonesian military service on July 2009.[16] They were publicly seen in service with the Mechanical TNI Battalion Task Force Garuda Contingent in Lebanon.[3][17]

The Anoa made its first appearance overseas when it was publicly display in BRIDEX 2011 in Brunei.[16] It was also displayed at DSA 2012 in Malaysia where a planned Malaysian-only marketed Anoa called the Rimau was unveiled to the public.[18]

Development

The development history of the Pindad Panser was started in 2003 as a result of increased military intervention in the Aceh province. During the conflict, the Indonesian Army put forward urgent requirements for an armored personnel carrier for the transport of troops.[19]

Pindad responded to this requirement in 2004, with the APR-1V (Angkut Personel Ringan)[20] a 4x4 armored vehicle based on a commercial Isuzu truck chassis. 14 vehicles were built by Pindad and were sent to Aceh for evaluation and combat trials. However, the follow-on orders for another 26 vehicles were canceled following the 2004 tsunami.[21]

Pindad continued the APC development program with assistance from the Agency For Assessment and Application of Technology or BPPT in 2005.[22] The next prototype was the APS-1 (Angkut Personel Sedang), a 6x6 design that was again based on a commercial Perkasa truck platform by PT Texmaco.[23] Although it was not selected for production, the experience gained in developing the APS-1 convinced the Indonesian Army to give the go-ahead by Pindad to develop the next generation of Panser vehicles, the APS-2 at a production cost of US$600,000 each.[9]

Design

The APS-3 differed from its predecessors which had been based on commercial truck platforms. Instead, the "Anoa" used a monocoque hull design consisting of armor steel. The steel was made by PT. Krakatau Steel to NATO standards to STANAG Level III standard in withstanding 5.56 and 7.62 mm bullets.[17] A new torsion bar suspension system was also developed for the Panser. Currently, the engine and transmission are imported from Renault with a Renault MIDR 062045 six-cylinder turbo-charged diesel engine being used.[24] Indigenous options are being developed as replacements. Gears consist of six forward and one reverse.[24]

The driver sits on the right of the vehicle while the vehicle commander sits on the left.[19] Communications equipment include VHF / FM (anti-jamming and hopping) and GPS with night vision equipment included.[19][25] Emergency exits are present on both sides of the Anoa, as well as a mounted video camera at the rear of the vehicle.[26]

Anoa-2

The Anoa-2 was officially revealed to the public in Indodefence 2010. It is equipped with optional waterjet propellers for the ability to swim in shallow water, probably from LST/LCAC.[21] It is also equipped with an optional RWS machine gun of unknown caliber, possibly 7.62 mm.[citation needed]

Visual external differences from the first generation of the Anoa include a change to rounded roof cupolas and the relocation of the smoke grenade launchers from the sides of the vehicle to directly above the driver and passenger positions.[21][25] The RWS is controlled remotely from inside the Anoa via joystick.[25] Bulletproof shutters can be opened and closed from inside the vehicle when needed as an option, which is an advantage over previously made Anoas that required one to open and close them from the outside.[25]

Badak FSV

A fire-support version using a CMI Defence's CSE-90 turret with the Cockerill 90 mm Mk III was first unveiled at Indo Defence & Aerospace 2008,[27] which was announced that the APS-3 fire-support version would be deployed into the Indonesian Army by 2010.[28] The final, definitive version of the fire support variant was unveiled at Indo Defence & Aerospace 2014 as the Badak. The Badak featured a new all-welded monocoque steel hull with STANAG 4569 Level 3 protection, a new 340 hp power pack located front left and the driver seated towards the front on the right side, leaving the remainder of the hull clear for the installation of the turret. The suspension also utilizes double wishbone independent suspension (as opposed to torsion bar on the Anoa) for better stability while firing the 90mm canon. The CMI Defence CSE 90LP two-person turret has a baseline protection of up to STANAG 4569 Level 1 (upgradable to Level 4) and is armed with a 90mm low-pressure rifled gun. In addition, there is a 7.62mm co-axial machine gun, with another 7.62mm machine gun mounted on the left side of the turret roof for use in the self-defence and air defence roles, plus banks of 76mm grenade launchers.[29][30]

Armament

The baseline vehicle is fitted with a cupola on the left of the vehicle and armed with a 12.7mm (.50 cal) heavy machine gun or a 40 mm automatic grenade launcher.[17][21] In Indo Defence & Aerospace 2010, the Anoa 2 was shown to the public with a RWS installed.[3][25]

Variants

Pindad Panser with a Cockerill 90 mm Mk III turret on display at Indo Defence & Aerospace 2008.

The following variants are produced by Pindad:[18][31][32][33]

  • APC
  • Badak FSV
  • Panser 20mm with Denel's LCT20 turret
  • Ambulance
  • Command
  • Logistics modular design for fuel carrier and/or ammunition carrier
  • Armored Recovery
  • Reconnaissance/Surveillance
  • Mortar Carrier
  • Rimau (proposed Anoa-2 variant for Malaysia)
  • Anoa-2

Operators

Map of Anoa operators in blue

Current operators

Potential operators

  •  Bangladesh: A visit by a Bangladeshi trade delegation to the Pindad office has expressed interest in possible acquisition of the Panser.[39]
  •  Iraq: Iraq has expressed interest in buying the Anoa, taking the geography into account, during several meetings between Iraqi and Indonesian officials.[40][41]
  •  Malaysia: In April 2012, Ahmad Zahid Hamidi confirmed that while the Anoa had been evaluated, no decision had been made on the acquisition.[42] There are 2 options for the machine to use, Mercedes Benz or Renault both with capacities 7,000 cubic-centimeter equivalent with 320 horse power.[43] The said order was for 32 Anoas to be purchased.[44] There is no signed deal available.[45]
  •    Nepal: Nepal was reported to have shown interest for 28 6x6 versions of the Panser for its UN peacekeeping missions.[46] There is no signed deal available.[45]
  •  Oman: Unconfirmed reports of 200 units ordered.[47] There is no signed deal available.[45]

See also

References

  1. 1.0 1.1 http://nasional.sindonews.com/read/844395/14/tni-tambah-24-panser-anoa-1394798598
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. 16.0 16.1 Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 17.2 Lua error in package.lua at line 80: module 'strict' not found.
  18. 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 19.2 Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. 21.0 21.1 21.2 21.3 Lua error in package.lua at line 80: module 'strict' not found. Cite error: Invalid <ref> tag; name "MF" defined multiple times with different content
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. 24.0 24.1 Lua error in package.lua at line 80: module 'strict' not found.
  25. 25.0 25.1 25.2 25.3 25.4 Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. http://www.webcitation.org/6Du9yHkyJ
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. 45.0 45.1 45.2 Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.

External links