Athena II

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Athena II
Athena 2 - Lunar Prospector.jpg
Athena II at LC-46 with Lunar Prospector
Function Small expendable launch system
Manufacturer Lockheed Martin
Alliant Techsystems
Country of origin  United States
Size
Height 28.2 metres (93 ft)
Diameter 2.36 metres (7 ft 9 in)
Mass 120,700 kilograms (266,100 lb)
Stages Four
Capacity
Payload to LEO 2,065 kilograms (4,553 lb)
Payload to SSO 1,165 kilograms (2,568 lb)
Payload to GTO 593 kilograms (1,307 lb)
Associated rockets
Family Athena
Comparable Falcon 1
Minotaur IV
Taurus
Launch history
Status Temporarily inactive
Launch sites Kodiak LP-1
MARS LP-0B
Spaceport Florida LC-46
Vandenberg SLC-6 & SLC-8
Total launches 3
Successes 2
Failures 1
First flight Athena II: 7 January 1998
Athena IIc: NET 2012
Last flight Athena II: 24 September 1999
First stage - Castor 120
Engines 1 solid
Thrust 1,900 kilonewtons (430,000 lbf)
Specific impulse 280 sec
Burn time 83 seconds
Fuel HTPB
Second stage - Castor 120
Engines 1 solid
Thrust 1,900 kilonewtons (430,000 lbf)
Specific impulse 280 sec
Burn time 83 seconds
Fuel HTPB
Third stage (Athena II) - Orbus 21D
Engines 1 solid
Thrust 189.2 kilonewtons (42,500 lbf)
Specific impulse 293 sec
Burn time 150 seconds
Fuel HTPB
Third stage (Athena IIc) - Castor 30
Engines 1 solid
Thrust 258.9 kilonewtons (58,200 lbf)[1]
Specific impulse 294 sec[2]
Burn time 143 seconds[2]
Fuel HTPB
Fourth stage - OAM
Engines 4 MR-107
Thrust 882 newtons (198 lbf)
Specific impulse 222 sec
Burn time 1,500 seconds
Fuel Hydrazine

The Athena II is an American small expendable launch system which was used for three launches between 1998 and 1999,[3] and which is scheduled to return to service in 2012. It is a member of the Athena family of rockets, along with the smaller Athena I. Launches from 2012 will use the Athena IIc configuration, which features a different third stage.[4]

The Athena II is a four-stage rocket, consisting of solid first, second and third stages, and a monopropellant liquid-fuelled fourth stage. The first and second stages are Castor 120s, which are also used on some versions of the Taurus rocket. An Orbus 21D motor was used as the third stage on launches during the 1990s, however when it returns to service in 2012 the Castor 30, which is under development for the Taurus II,[1] will be used instead.[4] The fourth stage is an Orbital Adjustment Module, fuelled by hydrazine and propelled by four MR-107 engines, which is used for final insertion.[5][6]

Prior to its retirement in 1999, Athena II launches were made from Launch Complex 46 at Spaceport Florida and Space Launch Complex 6 at Vandenberg Air Force Base. LC-46 will also be used for Athena IIc launches, with Launch Pad 0B of the Mid-Atlantic Regional Spaceport and Pad 1 of the Kodiak Launch Complex also offered. If a launch from Vandenberg is ordered, Space Launch Complex 8 will be used instead of SLC-6, which was rebuilt as a Delta IV launch complex following the Athena's initial retirement.[7]

During the 1990s, three Athena II launches were conducted, with one failure. Its maiden flight was conducted from LC-46 at Spaceport Florida, and lifted off at 02:28 GMT on 7 January 1997. The launch, which was the first to take place from Spaceport Florida, successfully placed the Lunar Prospector spacecraft into orbit for NASA. The next Athena II launch took place from SLC-6 at Vandenberg on 27 April 1999, with the Ikonos satellite for Space Imaging. The launch ended in failure after the payload fairing failed to separate, and as a result the rocket had too much mass to achieve orbital velocity.[8] The third launch also took place from SLC-6 at Vandenberg, on 24 September 1999. The payload, Ikonos 1, was also for Space Imaging, and successfully reached orbit.[3][9]

See also

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.