Biomedical Equipment Technician

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

A Biomedical Engineering/Equipment Technician/Technologist (BMET) or Biomedical Engineering/Equipment Specialist (BES or BMES) is typically an electro-mechanical technician or technologist who ensures that medical equipment is well-maintained, properly configured, and safely functional. In healthcare environments, BMETs often work with or officiate as a Clinical Engineer, since there is no legal distinction between these engineers and engineering technicians/technologists.[1]

BMETs are employed by hospitals, clinics, private sector companies, and the military. BMETs install, inspect, maintain, repair, calibrate, modify and design biomedical equipment and support systems to adhere to medical standard guidelines. BMETs educate and advise staff and other agencies on theory of operation, physiological principles, and safe clinical application of biomedical equipment maintaining the facility's patient care and medical staff equipment. Senior experienced BMETs perform the official part in the daily management and problem solving of healthcare technology beyond repairs and scheduled maintenance; such as, capitol asset planning, project management, budgeting and personnel management, designing interfaces and integrating medical systems, training end-users to utilize medical technology, and evaluating new devices for acquisition.

The acceptance of the BMET in the private sector was given a big push in 1970 when consumer advocate Ralph Nader wrote an article in which he claimed, "At least 1,200 people a year are electrocuted and many more are killed or injured in needless electrical accidents in hospitals."[2]

BMETs cover a vast array of different functional fields and medical devices. However, a few BMET specialize and focus on specific kinds of medical technology—(i.e., an Imaging Repair Specialist, Laboratory Equipment Specialist) and works strictly on medical imaging and/or medical laboratory equipment. These experts come from either from the military, or an OEM background. An Imaging Repair Specialist usually does not have much, if any, general BMET training. However, there are situations where a BMET will cross-train into these functional fields.

Examples of different areas of Medical equipment technology are:

BMETs work closely with nursing staff, and medical materiel personnel to obtain parts, supplies, and equipment and even closer with facility management to coordinate equipment installations requiring certain facility infrastructure requirements/modifications.

Regulatory issues

BMETs must conform with federal and state regulations and local standards on medical device safety, as well as most biomedical systems must have documentation to show that they were managed, modified, tested, and delivered. In addition, biomedical systems are used according to a planned, approved process that increases the quality and safety of diagnostics and therapeutic equipment that reduces the risk of injury, harm, or death to patients and staff.

In the United States, BMETs may operate under various regulatory frameworks. Clinical devices and technologies are generally governed by the Food and Drug Administration (FDA),[3] National Fire Protection Agency (NFPA) particularly NFPA 99 and chapter 7,[4] NFPA 70,[5] Life Safety Code 101,[6] Code of Federal Regulations (CFR) 21,[7] Occupational Safety and Health Administration,[8] The Joint Commission (TJC) [9] hospital or Accreditation Association for Ambulatory Health Care (AAAHC) [10] standards; and ensures compliance with these codes and standards for the US government registry of biomedical devices.

Other countries typically have their own mechanisms for regulation.

Biomedical equipment technology training

Traditionally, biomedical equipment technology has been an interdisciplinary field to specialize in after completing an Associate degree in Biomedical Equipment Technology, Biomedical Electronics Technology, or Biomedical Engineering Technology. Some BMETs get their training through the military.

Most entry-level BMETs enter into the field with a 2-year associate's degree in biomedical equipment technology, or they spend about one year in full-time military training. A 4-year graduate is a Health Technology Management (HTM) professional who can perform official medical equipment management duties as a clinical engineer, clinical engineering manager [11] or director of clinical engineering.[12] Practical experience should be gained through internships while continuing education is provided by specific medical device manufacturers and on-the-job training classes. BMET degree programs should be accredited by the ABET (Accreditation Board for Engineering and Technology) or the ATMAE (Association of Technology, Management, and Applied Engineering) both of whom offer specialized/programmatic accreditation for BMET programs. In addition, many 4 year graduates from accredited programs have studied or go on to study Biomedical Engineering, more specifically Clinical Engineering, if they wish to perform research and/or design (or MBA programs, if they wish to work on the business or administrative side).

Professional certification

Many BMETs pursue professional certification, such as satisfying certain education requirements and passing an examination from the International Certification Commission (ICC) and the Association for the Advancement of Medical Instrumentation (AAMI) to become a certified biomedical equipment technician (CBET),[13] that is an accomplished generalized certification in the field covering many facets. There are three other certifications BMETs should obtain such as: Certified Radiology Equipment Specialists (CRES)[13] that specializes more specifically in diagnostic imaging, radiological, and nuclear medicine equipment, Certified Laboratory Equipment Specialists (CLES)[13] that covers the abundance of equipment found in the many different kinds of laboratory environments, and even the less well known Certified Nephrology Equipment Specialist (CNES) that specifically specializes in nephrology and hemodialysis equipment. One can also choose to obtain the Certified Biomedical Auditor (CBA) [14] from the American Society of Quality or a Biomedical Electronics Technician certification (BMD) [15] from the Electronics Technician Association (ETA) after first obtaining the Associate Electronics Technician certification (CET). In most cases, carrying the title of "CBET" is highly encouraged, not mandatory but supported, and is respected within the technical community.

Employment

BMETs work in the hospital's Biomedical or Clinical Engineering Department, but can also find employment with a third-party independent service organization (ISO) or original equipment manufacturer (OEM).

BMETs working for an OEM or ISO are many times called Field Service Engineers (FSE). FSE are more narrowly focused and specialized technicians who support Service and Sales.

All military members entering the BMET career field receive comprehensive technical training. Prior to 1998, Army and Navy BMETs received training at the United States Army Equipment and Optical School (USAMEOS) at Fitzsimons Army Medical Center (FAMC) in Aurora, Colorado. Only after a July 1995 Base Realignment Closure Commission decided to close FAMC did the Army and Navy merge with the Air Force, conducting training at the DoD Biomedical Equipment Technician Training School at Sheppard Air Force Base, Texas. This school has a partnership with Aims Community College where students receive 81 quarter credits (from the Community College of the Air Force) toward an Associate of Applied Science (A.A.S.) Degree with an emphasis in Biomedical Electronic Technology. In addition to the credits acquired from DoD BMET Training School, a minimum of 24 credits must be completed through Aims Community College to receive a degree. As of August 4, 2010, the U. S. Military moved the BMET training to San Antonio, TX as a part of their new base realignment plan.[16] All three forces remain in rigorous, tri-service training for 10 months prior to returning to their individual services. The training is held at Fort Sam Houstion and is a part of the Military Education and Training Campus (METC).The first METC BMET class started on August 4, 2010, and the last Sheppard class graduated on January 14, 2011.[16]

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 About Certification. Association for the Advancement of Medical Instrumentation. Retrieved 2 December 2013.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ 16.0 16.1 Douglas. K. Richard. The U.S. Military’s Biomed Training Program: A Multiservice Commitment to Excellence. Association for the Advancement of Medical Instrumentation. April 2012. 48-52. Retrieved 2 December 2013.

Further reading

  • Bowles, Roger "Techcareers: Biomedical Equipment Technicians" TSTC Publishing
  • Dyro, Joseph., Clinical Engineering Handbook (Biomedical Engineering).
  • Khandpur, R. S. "Biomedical Instrumentation: Technology and Applications". McGraw Hills
  • Northrop, Robert B., "Noninvasive Instrumentation and Measurement in Medical Diagnosis (Biomedical Engineering)".
  • Webb, Andrew G., "Introduction to Biomedical Imaging (IEEE Press Series on Biomedical Engineering)".
  • Yadin David, Wolf W. von Maltzahn, Michael R. Neuman, and Joseph D. Bronzino,. Clinical Engineering (Principles and Applications in Engineering).
  • Villafañe, Carlos CBET: "Biomed: From the Student's Perspective" (ISBN # 978-1-61539-663-4). www.Biomedtechnicians.com.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Biomedical_Equipment_Technician&oldid=4838031"