Blisworth Tunnel

From Infogalactic: the planetary knowledge core
(Redirected from Blisworth tunnel)
Jump to: navigation, search
Blisworth Tunnel
Blisworth Tunnel southern portal.jpg
Southern Portal of Blisworth Tunnel
Overview
Location Blisworth, Northants, England
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
OS grid reference
Status Open, boat trips available.
Waterway Grand Union Canal
Start Lua error in package.lua at line 80: module 'strict' not found.
End Lua error in package.lua at line 80: module 'strict' not found.
Operation
Opened 25 March 1805
Owner was British Waterways now canal and river trust.
Technical
Construction 1793-1805
Length 3,076 yards (2,813 m)
Tunnel clearance 4 feet 6 inches (1.37 m)
Width a widebeam can fit though with about 4 inches to spare.

Blisworth Tunnel is a canal tunnel on the Grand Union Canal in Northamptonshire, England between the villages of Stoke Bruerne at the southern end and Blisworth at the northern end.

Measurements

The northern end is about 18 miles (29.0 km) from the northern end of the Grand Junction Canal at Braunston, Northamptonshire and the southern end about 20 miles (32.2 km). At 3,076 yards (2,813m) long it is the third-longest navigable canal tunnel on the UK canal network after Standedge Tunnel and Dudley Tunnel (and the ninth-longest canal tunnel in the world). At its deepest point it is ca.143 feet (ca.43m) below ground level.

The tunnel has no tow path inside, but is wide enough for two barges to pass in opposite directions.

History

Work began in 1793, but errors by contractor left a wiggle in the tunnel, and after three years work it collapsed due to quicksand, claiming the lives of 14 men. It was then decided to begin again with a new tunnel.[1]

By the time the rest of the Grand Junction Canal had opened between London and Braunston, Northamptonshire in 1800, apart from the crossing of the River Great Ouse, the section of canal from Blisworth to the lower end of Stoke Bruerne locks was the only section unfinished. This was despite the tunnel having been under construction for seven years: the gap was filled by a temporary horse-drawn tramway over the top of the hill, with goods being transported from boat to wagon and back again. The tramway, built in 1801, was Northamptonshire's first railway. In March 1805, the tunnel was finally opened and the rails were used to connect the main line of the canal to the River Nene until the branch canal to Northampton was constructed.

Till the 1930s travel through the tunnel was achieved by men lying on their backs pushing the barges with their feet. From the 1930s steam tugs were used to pull barges through, and extra ventilation shafts were installed.

Due to changes in the shape of the tunnel over time, the tunnel became unnavigable. There was some major rebuilding of the tunnel in the 1980s, with sections lined with pre-cast concrete rings. It was also used to test out the materials that were later used on the Channel Tunnel. One of the unused rings is on display just outside the south portal.

Features

File:Blisworth Tunnel North Portal 2008-01-12.jpg
North Portal at Blisworth and water inlet after heavy rain, January 2008
Point Coordinates
(With links to map
and aerial photo sources)
Northern portal Lua error in package.lua at line 80: module 'strict' not found.
Midpoint Lua error in package.lua at line 80: module 'strict' not found.
Southern portal Lua error in package.lua at line 80: module 'strict' not found.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Blisworth Images - A compilation of archival and modern photographs recorded since c. 1880 and a collection of articles on both the heritage and the history of the village.