Broad gauge

From Infogalactic: the planetary knowledge core
(Redirected from Broad-gauge)
Jump to: navigation, search
Track gauge
By transport mode
Tram · Rapid transit
Miniature · Scale model
By size (list)
Graphic list of track gauges

Minimum
  Fifteen inch 381 mm (15 in)

Narrow
  600 mm,
Two foot
597 mm
600 mm
603 mm
610 mm
(1 ft ​11 12 in)
(1 ft ​11 58 in)
(1 ft ​11 34 in)
(2 ft)
  750 mm,
Bosnian,
Two foot six inch,
800 mm
750 mm
760 mm
762 mm
800 mm
(2 ft ​5 12 in)
(2 ft ​5 1516 in)
(2 ft 6 in)
(2 ft ​7 12 in)
  Swedish three foot,
900 mm,
Three foot
891 mm
900 mm
914 mm
(2 ft​11 332 in)
(2 ft ​11 716)
(3 ft)
  Metre 1,000 mm (3 ft ​3 38 in)
  Three foot six inch,
Cape, CAP, Kyōki
1,067 mm (3 ft 6 in)
  Four foot six inch 1,372 mm (4 ft 6 in)

  Standard 1,435 mm (4 ft ​8 12 in)

Broad
  Russian,
Five foot
1,520 mm
1,524 mm
(4 ft ​11 2732 in)
(5 ft)
  Irish 1,600 mm (5 ft 3 in)
  Iberian 1,668 mm (5 ft ​5 2132 in)
  Indian 1,676 mm (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft ​14 in)
Change of gauge
Break-of-gauge · Dual gauge ·
Conversion (list· Bogie exchange · Variable gauge
By location
North America · South America · Europe
World map, rail gauge by region

Broad gauge railways use a track gauge (distance between the rails) greater than the standard gauge of 1,435 mm (4 ft 8 12 in).

History

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Great Western Railway broad-gauge steam locomotives awaiting scrapping in 1892 after the conversion of the tracks to standard gauge.

In Britain the Great Western Railway, designed by Isambard Kingdom Brunel, pioneered broad gauge from 1838 with a gauge of 7 ft 14 in (2,140 mm), and retained this gauge until 1892. Some harbours also used railways of this gauge for construction and maintenance. These included Portland Harbour and Holyhead Breakwater, which used a locomotive for working sidings. As it was not connected to the national network, this broad-gauge operation continued until the locomotive wore out in 1913.[1]

The gauge initially proposed by Brunel was 7 ft (2,134 mm) exactly but this was soon increased by Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). to get round clearance problems identified during early testing.

It became apparent that standardization on a single gauge throughout a rail transport system was advantageous. Rolling stock did not need to match the gauge exactly; a difference of a few millimetres could be coped with, so that interoperability on systems with gauges only slightly different was possible.

While the parliament of the United Kingdom of Great Britain and Ireland was initially prepared to authorise lines built to the broad gauge of 7 ft 14 in (2,140 mm), it was eventually rejected by the Gauge Commission in favour of all railways in the British Isles being built to standard gauge of 1,435 mm (4 ft 8 12 in), this being the gauge with the highest route-mileage. Ireland, using the same criteria, was allocated a different standard gauge, the Irish gauge, of 5 ft 3 in (1,600 mm). (This gauge is also used in the Australian state of Victoria). Broad-gauge lines in Britain were gradually converted to dual gauge or standard gauge from 1864, and finally the last of Brunel's broad gauge was converted over a single weekend in 1892.

Irish broad gauge tracks

Many countries have broad-gauge railways. Ireland (see History of rail transport in Ireland) and some states in Australia (see History of rail transport in Australia) and Brazil have a gauge of 5 ft 3 in (1,600 mm), but Luas, the Dublin light rail system, is built to standard gauge. Russia and the other former Soviet Republics use a 1,520 mm (4 ft 11 2732 in) (originally 5 ft (1,524 mm)) gauge while Finland continues to use the 5 ft (1,524 mm) gauge inherited from Imperial Russia (the two standards are close enough to allow full interoperability between Finland and Russia).

In 1839 the Netherlands started its railway system with two broad-gauge railways. The chosen gauge of 1,945 mm (6 ft 4 916 in) was applied between 1839 and 1866 by the Hollandsche IJzeren Spoorweg-Maatschappij (HSM) for its Amsterdam-The Hague-Rotterdam line and between 1842 and 1855, firstly by the Dutch state, but soon by the Nederlandsche Rhijnspoorweg-Maatschappij, for its Amsterdam-Utrecht-Arnhem line. But the neighbouring countries Prussia and Belgium already used standard gauge, so the two companies had to regauge their first lines. In 1855, NRS regauged its line and shortly afterwards connected to the Prussian railways. The HSM followed in 1866. There are replicas of one broad-gauge 2-2-2 locomotive (De Arend) and three carriages in the Dutch Railway Museum in Utrecht. These replicas were built for the 100th anniversary of the Dutch Railways in 1938–39.

Portugal and the Spanish Renfe system use a gauge of 1,668 mm (5 ft 5 2132 in) called "Ancho Ibérico" in Spanish or "Bitola Ibérica" in Portuguese (see Iberian gauge & Rail gauge); there are plans to convert to standard gauge.[2][3] In India, Pakistan and Bangladesh, a gauge of 5 ft 6 in (1,676 mm) is widespread. This is also used by the Bay Area Rapid Transit (BART) system of the San Francisco Bay Area.

In Toronto, Canada the gauge for TTC subways and streetcars was chosen in 1861, years after the establishment of 'standard gauge' in Britain, but well before 'standard gauge' in the US and Canada. Toronto uses a unique gauge of 4 ft 10⅞ in. (1.495 mm), an "overgauge" originally stated to 'allow horse-drawn wagons to use the rails', but with the practical effect of precluding the use of standard-gauge equipment in the street. In 1861, the province was supplying subsidies only to broad 'provincial gauge' railways.[citation needed]

The value of interoperability was initially not obvious to the industry. The standardization movement was gradual; over time the value of a proprietary gauge diminished, being replaced by the idea of charging money for equipment used on other railway lines.[citation needed]

The use of a non-standard gauge precludes interoperability of rolling stock on railway networks. On the GWR the 7 ft 14 in (2,140 mm) gauge was supposed to allow high speed, but the company had difficulty with locomotive design in the early years, losing much of the advantage, and rapid advances in permanent way and suspension technology allowed standard-gauge speeds to approach broad-gauge speeds within a decade or two. On the 5 ft 3 in (1,600 mm) and 5 ft 6 in (1,676 mm) gauges, the extra width allowed bigger inside cylinders and greater power, a problem solvable by using outside cylinders and higher steam pressure on standard gauge. In the event, the most powerful engines on standard gauge in North America and Scandinavia far exceeded the power of any broad-gauge locomotive.

Broad gauges

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

South Asia

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Broad gauge at MAS

The British Raj in India adopted 5 ft 6 in (1,676 mm) gauge, although some standard-gauge railways were built in the initial period. The standard-gauge railways were soon converted to broad gauge. Attempts to economise on the cost of construction led to the adoption of 1,000 mm (3 ft 3 38 in) gauge and then 2 ft 6 in (762 mm) and 2 ft (610 mm) narrow gauges for many secondary and feeder lines, particularly in mountainous terrain. Broad gauge remained the most prevalent gauge spanning the Indian Subcontinent, from Iran into Pakistan to Burma and Kashmir to Sri Lanka. After independence, the Indian Railways adopted 5 ft 6 in (1,676 mm) as the standard Indian gauge, and began Project Unigauge to convert metre-gauge and narrow-gauge lines to this gauge.

Some of the newer specialized rail projects in India, such as the Konkan Railway and the Delhi Metro, also use Indian gauge. The project manager of Delhi Metro initially requested standard gauge for the Metro, but due to Indian Railways having complete control over all railways built in India, the lines were initially built using Indian gauge. As Delhi Metro trains do not use Indian Railways infrastructure, and the widespread manufacturing of standard-gauge trains around the world enabling lower cost, standard gauge is used in the new lines on Delhi Metro, including the Airport Express Line, which uses rolling stock imported from Europe. The new Bangalore Metro is on a standard gauge, and other metros being planned or under construction (Mumbai Metro, Chennai Metro, Kochi (Cochin) metro and Hyderabad Metro systems) as of 2011 are also planned to be built to standard-gauge specifications.

Canada

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The first railway in British North America, the Champlain and St. Lawrence Railroad, was built in 1835-36 to 5 ft 6 in (1,676 mm) gauge, setting the standard for Britain's colonies for several decades. Today, this is commonly known as Indian gauge, but in 1851 the 5 ft 6 in (1,676 mm) broad gauge was officially adopted as the standard gauge for the Province of Canada, becoming known as the Provincial gauge, and government subsidies were unavailable for railways that chose other gauges. This caused problems in interchanging freight cars with northern United States railroads, most of which were built to standard gauge or a gauge similar to it. In the 1870s, mainly between 1872 and 1874, Canadian broad-gauge lines were changed to standard gauge to facilitate interchange and the exchange of rolling stock with American railroads. Today, all Canadian freight railways are standard-gauge.

The Toronto Transit Commission operates the Toronto streetcar system and three of the Toronto subway lines on its own unique gauge of 4 ft 10 78 in (1,495 mm).

Finland

In Finland the gauge is 1,524 mm (5 ft). When the Finnish rail network was founded in 1862, Finland was the Grand Duchy of Finland, a region of Imperial Russia. The first border crossing railway to Russia was opened in 1870, and to Sweden not until 1919. This is why railways were built to the broad Russian track gauge of 1,524 mm (5 ft). In Russia, this gauge was re-standardized to 1,520 mm (4 ft 11 2732 in) during the 1960s. Finland retained the original gauge with no re-standardization.

Iberian gauge

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

As finally established, the Iberian gauge of 1,668 mm (5 ft 5 2132 in) is a compromise between the similar, but slightly different, gauges first adopted as respective national standards in Spain and Portugal in the mid-19th century. The main railway networks of Spain were initially constructed to a 1,672 mm (5 ft 5 1316 in) gauge of six Castilian feet. Those of Portugal were initially built in standard gauge, but by 1864 were all converted to a 1,664 mm (5 ft 5 12 in) gauge of five Portuguese feet – close enough to allow interoperability in practice.[4] The new high-speed network in Spain and Portugal uses standard gauge. The dual-gauge high-speed train RENFE Class 130 can change gauge at low speed without stopping.

Irish gauge

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

As part of the railway gauge standardisation considered by the United Kingdom Parliamentary Gauge Commission, Ireland was allocated its own gauge, Irish gauge. Ireland then had three gauges, and the new standard would be a fourth.

The Irish gauge of 1,600 mm (5 ft 3 in) is used in Ireland and parts of Australia and Brazil. A problem with the Irish Gauge in Australia is that it is only 170 mm (6.5 in) wider than the standard gauge used in other parts of Australia, principally New South Wales. Therefore, it is not considered advisable to use a third rail to allow dual-gauge operation on mainline sections of track, because of the danger of material lodging between the two rails.[5] There has been argument for well over a century about the practicability of third rail operation, and numerous devices have been promoted to overcome the problem, especially at turnouts, including "Brennan Switch".[6]

5 ft and 1520 mm (Russian gauge)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

This gauge was first used in the United Kingdom and the United States before it became the standard gauge for most railways in the former Soviet Union.

Russian gauge or CIS gauge 1,520 mm (4 ft 11 2732 in) is the second most widely used gauge in the world, and spans the whole of the former Soviet Union/CIS bloc including the Baltic states and Mongolia. Finland uses 1,524 mm (5 ft). The difference is clearly lower than the tolerance margin, so through running is feasible. Care must be taken when servicing international trains because the wear profile of the wheels differs from that of trains that run on domestic tracks only.

United States

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Originally, various gauges were used in the United States and Canada. Some railways, primarily in the northeast, used standard gauge; others used gauges ranging from 4 ft 10 in (1,473 mm) to 6 ft (1,829 mm). Problems began as soon as lines began to meet and, in much of the Northeastern United States, standard gauge was adopted. Most Southern states used 5 ft (1,524 mm) gauge. Following the American Civil War, trade between the South and North grew and the break of gauge became a major economic nuisance. Competitive pressures had forced all the Canadian railways to convert to standard gauge by 1880, and Illinois Central converted its south line to New Orleans to standard gauge in 1881, putting pressure on the southern railways.

In the early days of rail transport in the US, railroads tended to be built out of coastal cities into the hinterland, and systems did not connect. Each builder was free to choose its own gauge, although the availability of British-built locomotives encouraged some railroads to be built to standard gauge. As a general rule, southern railroads were built to one or another broad gauge, mostly 5 ft (1,524 mm), while northern railroads that were not standard gauge tended to be narrow gauge. Most of the original track in Ohio was built in 4 ft 10 in (1,473 mm) Ohio gauge, and special compromise cars were able to run on both this track and standard gauge track.[7] When American railroads' track extended to the point that they began to interconnect, it became clear that a single nationwide gauge was desirable.

Six foot gauge railroads (6 ft, or, 1829mm) developed a large regional following in New York State in the first part of the 19th century, due to the influence of the New York and Erie, one of the early pioneering railroads in America, chartered in 1832, with its first section opening in 1841. The builders and promoters decided that a six-foot track gauge would be needed for locomotives to be larger and more powerful than were in general use at the time, for pulling very large trains. Also the six foot gauge provided greater stability, and the New York and Erie would operate passenger cars up to 11 feet wide. Building westward from the Hudson River, it eventually reached Lake Erie, establishing a 400-plus mile mainline and shortcut to American interior from the New York City vicinity, and helped spawn a regional network of six foot gauge railroads almost exclusively within New York State. Many were Erie railroad-built branch lines, while others were independent railroads that wanted to partner and interchange with the Erie. These included the Walkill Valley, the Albany and Susquehanna (later part of the Delaware and Hudson), the Elmira, Jefferson & Canandaigua (later the Northern Central, becoming part of the Pennsylvania Railroad), the Delaware, Lackawanna and Western mainline (which also had a significant amount of trackage in Pennsylvania), predecessor lines of the New York and Oswego Midland (later the New York, Ontario, and Western), and the Canandaigua and Niagara Falls (later becoming part of the New York Central railroad's Peanut Route along the shoreline of Lake Ontario). By the late 1870s however, the writing was on the wall, and conversion to standard gauge began, some lines first becoming dual gauged with the addition of a third running rail. Between 1876 and 1880 most of the six foot gauge trackage was converted.[8]

In 1886, the southern railroads agreed to coordinate changing gauge on all their tracks. After considerable debate and planning, most of the southern rail network was converted from 5 ft (1,524 mm) gauge to 4 ft 9 in (1,448 mm) gauge, nearly the standard of the Pennsylvania Railroad, over two days beginning on 31 May 1886. Over a period of 36 hours, tens of thousands of workers pulled the spikes from the west rail of all the broad gauge lines in the South, moved them 3 in (76 mm) east and spiked them back in place. The new gauge was close enough that standard-gauge equipment could run on it without difficulty. By June 1886, all major railroads in North America were using approximately the same gauge. The final conversion to true standard gauge took place gradually as track was maintained.[9]

Some North American streetcar lines intentionally varied from standard gauge. This may have been to make the streetcar companies less tempting targets for takeovers by the steam railroads (or competing streetcar companies), which would be unable to run their trains over the streetcar tracks.[10]

Contemporary non standard broad gauges

The Bay Area Rapid Transit (BART) system in the San Francisco Bay Area was constructed with 5 ft 6 in (1,676 mm) (otherwise called Indian gauge). A surviving non-standard broad gauge still in use is the Pennsylvania trolley gauge of 5 ft 2 12 in (1,588 mm),[11] still used on the streetcars in New Orleans, and the Pittsburgh Light Rail system. This gauge was also used for the now defunct Pittsburgh Railways, West Penn Railways, and streetcars in Cincinnati. 5 ft 2 14 in (1,581 mm) gauge is used in Philadelphia on the SEPTA routes, 15, 101 and 102, the Subway–Surface Trolleys and the SEPTA Market-Frankford. Toronto's streetcars use a track gauge of 4 ft 10 78 in (1,495 mm).

Broader gauges

Broad gauge track for CSIRO Australia Telescope in Narrabri
Dockside crane on wide gauge tracks at the former South Boston Naval Annex's Dry Dock Number 3

Some applications require broader gauges, including:

These applications might use double track of the country's usual gauge to provide the necessary stability and axle load. These applications may also use much heavier than normal rails, the heaviest rails for trains being about 70 kg/m (141 lb/yd).

Vehicles on these gauges generally operate at very low speeds.

Broad Gauge in Literature

There is a P. G. Wodehouse character Roderick Spode who suggests widening the rails of the entire British railway network so sheep may stand sideways on trains.[13]

See also

References

  1. Connection
  2. Verkehrsrundschau, April 30, 2007
  3. http://www.travelinside.ch/primus/notdArchiv.php?we_objectID=5380
  4. PEQUENA HISTÓRIA DOS CAMINHOS DE FERRO EM PORTUGAL
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. http://www.crookedlakereview.com/articles/136_150/147apr2008/147palmer3.html
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. E.g., Columbus' Streetcar Track Gauge: 5'2" vs 4'8 1/2", Columbus Railroads, accessed 22 March 2011
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. The New York Times Magazine, 11 May 2008, p. 65
  13. Lua error in package.lua at line 80: module 'strict' not found.

External links