Cape Bowling Green Light

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Cape Bowling Green Light
Cape Bowling Green Light is located in Queensland
Cape Bowling Green Light
Queensland
Location Cape Bowling Green
Queensland
Australia Australia
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Year first constructed 1987
Construction skeletal tower
Tower shape square frustum
Markings / pattern white tower and red upper band
Height 105 feet (32 m)
Focal height 118 feet (36 m)
Range 11 nautical miles (20 km; 13 mi)
Characteristic Fl(4) W 20s
Admiralty number K3090
NGA number 111-10108
ARLHS number AUS-023
Managing agent Australian Maritime Safety Authority
File:Cape Bowling Green - Plan, 1927.jpg
Map showing the position of the lighthouse on Cape Bowling Green, 1927
File:Cape Bowling Green Lighthouse, 1919.jpg
Plans of the first lighthouse
Cape Bowling Green Lighthouse (original)
File:Cape Bowling Green lighthouse, 2008.jpg
Cape Bowling Green Lighthouse at the Australian National Maritime Museum, 2008
Cape Bowling Green Light is located in New South Wales
Cape Bowling Green Light
Location Sydney
New South Wales
Australia Australia
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Year first constructed 1874
Automated 1920
Deactivated 1987
Construction hardwood frame clad with galvanized iron plates
Tower shape conical frustum tower with balcony and lantern
Markings / pattern white tower and lantern, red rail
Height 22 metres (72 ft)[1]
Focal height 19 metres (62 ft)[2]
Original lens 3rd order Chance Brothers
Characteristic Fl(4) W 20s
ARLHS number AUS-246

Cape Bowling Green Light is an active lighthouse located on Cape Bowling Green, a lengthy headland ending with a long low sandspit, about 30 kilometres (19 mi) from Ayr, Queensland, Australia. The lighthouse is at the end of the headland, near the base of the sandspit. The first lighthouse at the location, established 1874, was moved multiple times. It was prefabricated in Brisbane, shipped to the location, moved twice due to coastal erosion and finally transferred for display at the Australian National Maritime Museum at Darling Harbour in Sydney.[2][3]

History

Many ships wrecking at Cape Bowling Green necessitated the construction of a lighthouse at the cape. The first Cape Bowling Green Light was constructed in 1874, one of 22 lighthouse of similar design constructed in Queensland around that time. It was a round conical tower, constructed of local hardwood frame clad with galvanized iron plates imported from Britain. The lighthouse was prefabricated in Brisbane, then dismantled and shipped to the location to be erected again.[3] The construction was done by the brothers John and Jacob Rooney of Maryborough, which also constructed Sandy Cape Light, Cowan Cowan Point Light, Cape Capricorn Light, Lady Elliot Island Light[4] and Booby Island Light.[5]

The original lens was a 3rd order Chance Brothers dioptric lens, and the light source was a kerosene wick lamp with an intensity of 13,000 cd, visible for 14 nautical miles (26 km; 16 mi). The apparatus was rotated with a clockwork mechanism and the station was operated by four lighthouse keepers, a chief and three assistants.[3]

In 1878 beach erosion threatened the lighthouse for the first time and it was moved for the first time. In 1908 the tower had to be relocated further away for the same reason.[3][2]

In 1913 an incandescent gas mantle operated by vaporised kerosene was installed, raising the power to 64,000 cd. In 1920 a fixed automatic acetylene gas lamp (carbide lamp) with a sun valve was installed. As a result, the lighthouse was demanned and all other buildings were demolished.[3]

In 1985 a racon was installed. In 1987 the lighthouse was replaced by the current skeletal tower. With the sponsorship of the Australian Maritime Safety Authority, the lighthouse was dismantled, and sections were lifted by a Department of Transport helicopter to a site where they were numbered, crated, and shipped to Sydney. By 1994 the lighthouse was reassembled at the Australian National Maritime Museum where it is now on display. [3] The lighthouse is still operational, using the original 3rd order lens and a typical 1913 clockwork mechanism, and it maintains its original light characteristic, four white flashes every twenty seconds (Fl.(4)W. 20s).[2]

Current structure and display

The current tower is a square steel skeletal tower. It is topped by a square lantern structure with a gallery. It is painted white with a red horizontal band at the top.[6] The light characteristic shown is four white flashes every twenty seconds (Fl.(4)W. 20s), visible for 11 nautical miles (20 km; 13 mi).[7]

Site operation and visiting

The current lighthouse is operated by the AMSA. The visiting status is unclear.[6] The original lighthouse is owned and operated by the Australian National Maritime Museum,[2] and it is open for guided tours daily.[8]

See also

<templatestyles src="Stack/styles.css"/>

Notes

  1. Museum. Rowlett states 16 metres (52 ft)
  2. 2.0 2.1 2.2 2.3 2.4 Rowlett NSW.
  3. 3.0 3.1 3.2 3.3 3.4 3.5 Museum.
  4. QLD601712.
  5. QLD601724.
  6. 6.0 6.1 Rowlett.
  7. List of Lights
  8. Guided Tours.

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

Template:Lighthouses of Queensland