Ceramic knife

A ceramic knife

A ceramic knife is a knife made out of very hard and tough ceramic, often zirconium dioxide (ZrO₂; also known as zirconia). These knives are usually produced by dry-pressing zirconia powder and firing them through solid-state sintering. The resultant blade is sharpened by grinding the edges with a diamond-dust-coated grinding wheel. Zirconia is 8.5 on the Mohs scale of mineral hardness, compared to 4.5 for normal steel and 7.5 to 8 for hardened steel and 10 for diamond. This very hard edge rarely needs sharpening.

Zirconium oxide

See also: Yttria-stabilized zirconia

Dalstrong Infinity Blade - Ceramic Knife. Made from blackened zirconium, super heated under pressure.

Zirconium oxide is used due to its polymorphism. It exists in three phases: monoclinic, tetragonal and cubic. Cooling to the monoclinic phase after sintering causes a large volume change, which often causes stress fractures in pure zirconia. Additives such as magnesium, calcium and yttrium are utilized in the manufacture of the knife material to stabilize the high-temperature phases and minimize this volume change. The highest strength and toughness is produced by the addition of 3 mol% yttrium oxide yielding partially stabilized zirconia. This material consists of a mixture of tetragonal and cubic phases with a bending strength of nearly 1,200 MPa. Small cracks allow phase transformations to occur, which essentially close the cracks and prevent catastrophic failure, resulting in a relatively tough ceramic material, sometimes known as TTZ (transformation-toughened zirconia).

Properties

Ceramic knives are substantially lighter than steel knives, will not corrode in harsh environments, are non-magnetic, and do not conduct electricity at room temperature. Because of their resistance to strong acid and caustic substances, and their ability to retain a cutting edge longer than forged metal knives, ceramic knives are better suited for slicing boneless meat, vegetables, fruit and bread. Since ceramics are brittle, blades may break if dropped on a hard surface although better manufacturing processes have reduced this risk. They are also unsuitable for chopping through bones, or frozen foods, or in other applications which require prying, which may result in chipping or catastrophic failure. Several brands now offer either a black-coloured or a designed blade made through an additional hot isostatic pressing step, which increases the toughness.

Sharpening & General Care

Diamond Dust Sharpener with Cradle for Ceramic Knife. (Pictured: Dalstrong Infinity Blade Collection Set)

Unlike a traditional steel blade that benefits from regular honing and resharpening in order to keep a sharp edge, a ceramic knife will stay sharp and retain its cutting edge for much longer - up to 10x longer according to some tests. Although a ceramic knife therefore does not need regular sharpening in the same way as steel, its blade edge will eventually degrade or chip and lose its cutting edge - especially if not protected or stored carefully.

The inherent hardness of the ceramic material also makes it more difficult for the consumer to resharpen. A traditional sharpening or honing steel is not effective. Suppliers take different approaches on the question of resharpening. One supplier advises against re-sharpening, suggesting that ceramic knives can be considered as limited lifetime disposable items. Other suppliers encourage occasional resharpening and provide ceramic-specific diamond-based sharpening appliances which can be costly. Some manufactures have elected to include sharpening devices alongside their product.

Use in the kitchen

Ceramic knives are particularly useful as kitchen knives for fine slicing and paring of fruit and vegetables as they do not react with food acids.

External links

• Media related to at Wikimedia Commons