From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Spreading homo sapiens la.svg
Geographical range Afro-Eurasia
Period Lower Paleolithic
Dates circa 300000 BCE — circa 200000 BCE
Type site Clacton-on-Sea
Major sites Barnham, Nile, Swanscombe Heritage Park
Preceded by Acheulean
Followed by Mousterian
A reconstruction of Homo erectus at the Westfälisches Landesmuseum, Herne, Germany, in a 2006 exhibition. Clactonian tools were made by Homo erectus rather than modern humans.
Clactonian Hand-axe from Rickson’s Farm pit, Clacton, Essex.

The Clactonian is the name given by archaeologists to an industry of European flint tool manufacture that dates to the early part of the interglacial period known as the Hoxnian, the Mindel-Riss or the Holstein stages (c. 400,000 years ago). Clactonian tools were made by Homo erectus rather than modern humans. The term is sometimes applied to early, crude flint tools from other regions that were made using similar methods.

It is named after 400,000-year-old finds made by Hazzledine Warren in a palaeochannel at Clacton-on-Sea in the English county of Essex in 1911. The artefacts found there included flint chopping tools, flint flakes and the tip of a worked wooden shaft along with the remains of a giant elephant and hippopotamus. Further examples of the tools have been found at sites including Barnfield Pit near Swanscombe in Kent and Barnham in Suffolk; similar industries have been identified across Northern Europe. The Clactonian industry involved striking thick, irregular flakes from a core of flint, which was then employed as a chopper. The flakes would have been used as crude knives or scrapers. Unlike the Oldowan tools from which Clactonian ones derived, some were notched implying that they were attached to a handle or shaft. Retouch is uncommon and the prominent bulb of percussion on the flakes indicates use of a hammerstone.

Within the banks of the Nile River, at the 100 foot terrace, excavations located Egyptian version of Clactonian.[1]

Map of Afro-Eurasia showing important sites of the Clactonian industry (clickable map).

The Clactonian controversy

The Clactonian industry may have co-existed with the Acheulean industry, which used identical basic techniques but which also had handaxe technology; tools made by bifacially working a flint core. In the 1990s it was argued[2] that the difference between Clactonian and Acheulean may be a false distinction. The Clactonian industry may in fact be the same thing as the Acheulean and only assessed as being different due to its tools being Acheulean ones made by individuals who had no need for handaxes on the occasion that they made them. Differences in environment and the availability and quality of local raw materials may account for the differences between the two industries, which, at one point it was inferred, were only perceived by modern archaeologists.

However, the 2004 excavation of a butchered Pleistocene elephant at the Southfleet Road site of High Speed 1 in Kent recovered numerous Clactonian flint tools but no handaxes. As a handaxe would have been more useful than a chopper in dismembering an elephant carcass it is considered strong evidence of the Clactonian being a separate industry. Flint of sufficient quality was available in the area and it is likely that the people who carved up the elephant did not possess the knowledge to make the more advanced bifacial handaxe. Proponents of the Clactonian as an independent industry point to the lack of concrete evidence in favour of it being an anomalous Acheulean industry. The precise provenance of the few attributed bifacial Clactonian tools (which point to Acheulean influence) is in dispute.

The traditional chronology of Clactonian being followed by Acheulean is also being increasingly challenged since finds of Acheulean tools were made at Boxgrove in Sussex and High Lodge in Suffolk. These finds came from deposits connected with the Anglian Stage, the glaciation that preceded the Hoxnian Stage and therefore would have preceded the Clactonian. Whether or not they are separate industries it would seem that the 'Clactonian' and 'Acheulean' stone tool makers would have had cultural contact with each other.

See also


  1. Langer, William L., ed. (1972). An Encyclopedia of World History (5th ed.). Boston, MA: Houghton Mifflin Company. p. 9. ISBN 0-395-13592-3.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  2. Ashton, N., McNabb, J.; et al. Contemporaneity of Clactonian and Acheulian flint industries at Barnham, Suffolk in Antiquity 68 (1994), 260. pp. 585–589. <templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>

Butler, C, Prehistoric Flintwork, Tempus : Strood, 2005

External links

The Paleolithic

Pliocene (before Homo)

Lower Paleolithic (c. 3.3 Ma – 300 ka)

Oldowan (2.6–1.7 Ma)
Riwat (1.9–0.045 Ma)
Soanian (0.5–0.13 Ma)
Acheulean (1.8–0.1 Ma)
Clactonian (0.3–0.2 Ma)

Middle Paleolithic (300–45 ka)

Mousterian (600–40 ka)
Micoquien (130–70 ka)
Aterian (82 ka)

Upper Paleolithic (40–10 ka)

Baradostian (36 ka)
Châtelperronian (41–39 ka)
Aurignacian (38–29 ka)
Gravettian (29–22 ka)
Solutrean (22–17 ka)
Magdalenian (17–12 ka)
Hamburg (14–11 ka)
Federmesser (14–13 ka)
Ahrensburg (12–11 ka)
Swiderian (11–8 ka)
Stone Age