Compass saw

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

A compass saw is a type of saw used for making curved cuts known as compasses, particularly in confined spaces where a larger saw would not fit.[1][2]

Characteristics

Compass saws have a narrow, tapered blade usually ending in a sharp point, typically with eight to ten teeth per inch,[2] but up to twenty teeth per inch for harder materials and as few as five teeth per inch for softer materials.[1] They have a curved, light "pistol grip" handle, designed for work in confined spaces and overhead.[2]

The blade of a compass saw may be fixed or retractable, and are typically interchangeable. Partially retracting the blade can prevent flexing and breaking when cutting harder materials.[1]

Compass saws are suitable for cutting softer woods, plastic, drywall, and non-ferrous metals.[1][2] The pointed tip of the blade can be used to penetrate softer materials without the need for a pilot hole.[1]

Comparison with other types of saws

Compared with other saws designed for cutting curves, such as coping or fretsaws, compass saws have a larger blade and fewer teeth per inch. This allows them to cut more quickly, and to cut through thicker materials, but leaves a rougher finish.[2]

Compared with drywall saws, compass saws typically have a longer blade – at Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). – and more teeth per inch.[1][2]

Keyhole saws, also called padsaws or jab saws, feature shorter, finer blades and (often) straight handles, and are suitable for cutting extremely tight curves.[2][3]

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.

<templatestyles src="Asbox/styles.css"></templatestyles>