Conde McCullough Memorial Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Coos Bay Bridge
CondeMcCulloughMemorialBridge.jpg
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Carries US 101
Crosses Coos Bay
Locale North Bend, Oregon
Official name Conde B. McCullough Memorial Bridge
Maintained by Oregon DOT
Characteristics
Design Cantilever through-truss
Total length 5,305 ft (1,617.0 m)
Longest span 793 ft (241.7 m)
Clearance below 150 ft (45.7 m)
History
Opened 1936
Coos Bay Bridge No. 01823
Built 1934–36[1]
MPS McCullough, C.B., Major Oregon Coast Highway Bridges, 1927-1936
NRHP Reference # 05000817[1]
Added to NRHP August 5, 2005[1]

The Conde B. McCullough Memorial Bridge, formerly the North Bend Bridge (Coos language: Danisich[2]), is a cantilever bridge that spans Coos Bay on U.S. Route 101 near North Bend, Oregon. It is one of a series of eleven major bridges on the Oregon Coast Highway that were designed under the supervision of Conde B. McCullough, replacing ferries that had formerly crossed the bay. The bridge is outstanding for its attention to form and detail, and has been placed on the National Register of Historic Places in recognition of its design and cultural and economic importance.

History

Work started on what was then called the North Bend Bridge on July 10, 1934. Glenn S. Paxson, Acting State Bridge Engineer while McCullough took a leave of absence to work on projects in Central America, was the supervising engineer during construction. The resident engineer was Raymond Archibald until 1935, when he joined McCullough, then Dexter R. Smith. The Northwest Roads Company of Portland, Oregon built the piers and the concrete structure. The steel sections of the bridge were built by the Virginia Bridge and Iron Company. The main piers are supported on piles driven into the bay's bed. The main towers of the cantilever section were fabricated off-site and moved to the bridge site in four sections. Work on the cantilever arms moved out in both directions from the tower, with the shoreward arm keeping slightly ahead of the center arm so that it would rest on a temporary support structure to stabilize the bridge. The concrete arch sections were erected using timber falsework. The bridge opened in June 1936.[1]

When the bridge was completed in 1936 it was the longest bridge in Oregon.[3] It was the costliest of the Oregon Coast bridges at $2.14 million (equivalent to approximately $35 million in 2012[4]). Because the five largest bridges on the coastal route were so expensive, their construction was largely funded by the Public Works Administration. The North Bend Bridge was dedicated to its designer, Conde McCullough, in 1947.[1]

The McCullough Bridge was damaged on December 4, 1986 when a Swedish ship, the Elgaren, struck the bottom of the center span. The ship was entering the harbor on a day when the tide was 3 feet (0.91 m) above normal, and was unable to lower a vertically-stowed ramp in time after the ramp's mechanism malfunctioned. The bridge was closed for repairs.[1]

Description

Because of the long spans and heavily trafficked shipping channel, a cantilever construction was deemed most suitable; a draw span was rejected because it would have to be opened too often. Consequently the 793-foot (242 m) main span has 145 feet (44 m) of vertical clearance and is part of a 1,708-foot (521 m) long steel cantilever span. Overall length, including the concrete approach spans is 5,305 feet (1,617 m). The approach spans are concrete arches more typical of McCullough's designs.[5] The main roadway is 27 feet (8.2 m) wide with 3.5-foot (1.1 m) wide sidewalks on either side. The main towers rise 280 feet (85 m) above the water surface, with curved sway bracing in a Gothic arch style. The open-spandrel concrete approach arches vary in span from 265 feet (81 m) to 151 feet (46 m). The ends of the bridge are marked by pedestrian plazas meant to provide a viewing point for the bridge and to provide access to the shoreline. These plazas are detailed with Art Moderne motifs and are provided with built-in benches. The stairs are descend in sweeping curves to the park below.[1]

Designation

The city of North Bend, Oregon uses images of the bridge extensively in public relations material. The bridge was placed on the National Register of Historic Places on August 5, 2005.[1]

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Inflation Calculator
  5. Lua error in package.lua at line 80: module 'strict' not found.

External links

Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons