Cyclopentadienyliron dicarbonyl dimer

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Cyclopentadienyliron dicarbonyl dimer
200px
200px
200px
Names
Other names
Bis(cyclopentadienyl)tetracarbonyl-diiron,
Di(cyclopentadienyl)tetracarbonyl-diiron,
Bis(dicarbonylcyclopentadienyliron)
Identifiers
12154-95-9 YesY
ChemSpider 24589716 YesY
Jmol 3D model Interactive image
  • InChI=1S/2C5H5.4CO.2Fe/c2*1-2-4-5-3-1;4*1-2;;/h2*1-5H;;;;;;/q;;;;2*-1;2*+1 YesY
    Key: XJSJEKXJJGHIGW-UHFFFAOYSA-N YesY
  • InChI=1/2C5H5.4CO.2Fe/c2*1-2-4-5-3-1;4*1-2;;/h2*1-5H;;;;;;/q;;;;2*-1;2*+1/r2C6H5FeO.2CO/c2*8-5-7-6-3-1-2-4-6;2*1-2/h2*1-4,6H;;
    Key: XJSJEKXJJGHIGW-FEMRPSMKAV
  • [C-]#[O+].[C-]#[O+].C1=CC(C=C1)[Fe+][C-]=O.C1=CC(C=C1)[Fe+][C-]=O
Properties
C14H10Fe2O4
Molar mass 353.925 g/mol
Appearance Dark purple crystals
Density 1.77 g/cm3, solid
Melting point 194 °C (381 °F; 467 K)
Boiling point decomposition
insoluble
Solubility in other solvents benzene, THF, chlorocarbons
Structure
distorted octahedral
0 D
Vapor pressure {{{value}}}
Related compounds
Related compounds
Fe(C5H5)2
Fe(CO)5
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Cyclopentadienyliron dicarbonyl dimer is an organometallic compound with the formula (η5-C5H5)2Fe2(CO)4, also abbreviated Cp2Fe2(CO)4. It is called Fp2 or "fip dimer." It is a dark reddish-purple crystalline solid, which is readily soluble in moderately polar organic solvents such as chloroform and pyridine, but less soluble in carbon tetrachloride and carbon disulfide. Cp2Fe2(CO)4 is insoluble in but stable toward water.

Structure

In solution, Cp2Fe2(CO)4 can be considered a dimeric half-sandwich complex. It exists in three isomeric forms: cis, trans, and unbridged. These isomeric forms are distinguished by the position of the ligands. Cis and trans differ in the relative position of C5H5 (Cp) ligands. For both the cis and trans isomers, two CO ligands are terminal whereas the other two CO ligands bridge between the iron atoms. However, in the unbridged isomer, no ligands bridge between iron atoms — the metals are held together only by the Fe–Fe bond. Cis and trans isomers are the more abundant.

Mechanism proposed for interconversion of isomers of Fp2.

In solution, the three isomers interconvert. The phenomenon of rapidly interconverting structures is called fluxionality. The fluxional process for cyclopentadienyliron dicarbonyl dimer is so fast that only an averaged, single signal is observed in 1H NMR spectrum. However, the fluxional process is not fast enough to produce averaging in the IR spectrum. Thus, three absorptions are seen for each isomer. The νCO bands for bridging CO ligands are around 1780 cm−1 whereas νCO bands for terminal CO ligands are about 1980 cm−1.[1]

The solid-state molecular structure of both cis and trans isomers have been analyzed by X-ry and neutron diffraction. The Fe–Fe separation and the Fe–C bond lengths are the same in the Fe2C2 rhomboids, an exactly planar Fe2C2 four-membered ring in the trans isomer versus a folded rhomboid in cis with an angle of 164°, and significant distortions in the Cp ring of the trans isomer reflecting different Cp orbital populations.[2] Although older textbooks show an Fe–Fe bond, theoretical analyses indicated the absence of a direct Fe–Fe bond.[3]

Synthesis

Cp2Fe2(CO)4 was first prepared by the same method employed today: the reaction of iron pentacarbonyl and dicyclopentadiene.[4]

2 Fe(CO)5 + C10H12 → (η5-C5H5)2Fe2(CO)4 + 6 CO + H2

In this preparation, dicyclopentadiene cracks to give cyclopentadiene, which reacts with Fe(CO)5 with loss of CO. Thereafter, the pathways for the photochemical and thermal routes differ subtly but both entail formation of a hydride intermediate.[2] The method is used in the teaching laboratory.[1]

Applications

Although of no major commercial value, Fp is a workhorse in organometallic chemistry because it is inexpensive and rugged.

"Fp"

Reductive cleavage of the Cp2Fe2(CO)4 produces derivatives formally derived from the cyclopentadienyliron dicarbonyl anion, [CpFe(CO)2] or called Fp, which is assumed to exist as a tight ion pair. A typical reductant is sodium metal or sodium amalgam;[5] NaK alloy, and alkali metal trialkylborohydrides have been used. CpFe(CO)2]Na is a widely studied reagent since it is readily alkylated, acylated, or metalated by treatment with an appropriate electrophile.[6]

[CpFe(CO)2]2 + Na·Hg → 2 CpFe(CO)2Na
[CpFe(CO)2]2 + 2 KBH(C2H5)3 → 2 CpFe(CO)2K + H2 + 2 B(C2H5)3

Treatment of NaFp with an alkyl halide (RX, X = Br, I) produces FeR(η5-C5H5)(CO)2

CpFe(CO)2K + CH3I → CpFe(CO)2CH3 + KI

Other methods for reduction of Fp2 have been described, including chemical[7] and electrochemical reduction.[8][9]

FpBr and FpI

Halogens oxidatively cleave Fp2 to give FpX (X = Cl, Br, I):

[CpFe(CO)2]2 + X2 → 2 CpFe(CO)2X

One example is cyclopentadienyliron dicarbonyl iodide.

Fp(alkene)+

In the presence of halide anion acceptors such as AlBr3, FpX compounds react with alkenes to afford cationic alkene–Fp complexes. In some cases, salts of [Fp(isobutene)]+ are precursors to other Fp–alkene complexes. The exchange process is facilitated by the loss of gaseous isobutene.

330 px

Alkene–Fp complexes can also be prepared from Fp anion indirectly. Thus, hydride abstraction from Fp–alkyl compounds using triphenylmethyl hexafluorophosphate affords [Fp(isobutene)]+ complexes.

FpNa + RCH2CH2I → FpCH2CH2R + NaI
FpCH2CH2R + Ph3CPF6 → [Fp(CH2=CHR)+]PF6- + Ph3CH

Reaction of NaFp with an epoxide followed by acid-promoted dehydration also affords alkene complexes. Fp(alkene)+ are stable with respect to bromination, hydrogenation, and acetoxymercuration, but the alkene is easily released with sodium iodide in acetone or by warming with acetonitrile.[10]

580 px

The alkene ligand in these cations is activated toward attack by nucleophiles, opening the way to a number of carbon–carbon bond-forming reactions. Nucleophilic additions usually occur at the more substituted carbon. This regiochemistry is attributed to the greater positive charge density at this position. The regiocontrol is often modest. The addition of the nucleophile is completely stereoselective, occurring anti to the Fp group.

Addition of carbanion to [Fp(alkene)]+.

Fp-based cyclopropanation reagents

Fp-based reagents have been developed for cyclopropanations.[11] The key reagent is prepared from FpNa and has a good shelf-life, in contrast to typical Simmons-Smith intermediates and diazoalkanes.

FpNa + ClCH2SCH3 → FpCH2SCH3 + NaCl
FpCH2SCH3 + CH3I + NaBF4 → FpCH2S(CH3)2]BF4 + NaI

Use of [FpCH2S(CH3)2]BF4 does not require specialized conditions.

Fp(CH2S+(CH3)2) BF4 + (Ph)2C=CH2 → 1,1-diphenylcyclopropane + ....

Ferric chloride is added to destroy any byproduct.

Photochemical reaction

Fp2 exhibits photochemistry.[12] Upon UV irradiation at 350 nm, it is reduced by 1-benzyl-1,4-dihydronicotinamide dimer, (BNA)2.[13]

[CpFe(CO)2]2 + (BNA)2 → 2[CpFe(CO)2] + 2BNA+

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.; Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.; Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.