De Ouderkerkermolen, Aldtsjerk

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Oudkerkemolen, Aldtsjerk
250px
De Ouderkerkermolen, April 2005
Origin
Mill name De Oudkerkermolen
Oudkerkemolen
Mill location Rhaladyk 19, 9064 DD, Aldtsjerk
Lua error in package.lua at line 80: module 'strict' not found.
Operator(s) Stichting Waterschaps Erfgoed
Year built 1864
Information
Purpose Drainage mill
Type Smock mill
Storeys Single-storey base
Base storeys Three-storey smock
Smock sides Eight sides
Number of sails Four sails
Type of sails Common sails
Windshaft Cast iron
Winding Tailpole and winch
Auxiliary power Diesel engine
Type of pump Archimedes' screw

De Oudkerkermolen, or Oudkerkemolen (English: Old Church Mill) is a smock mill in Aldtsjerk, Friesland, Netherlands which has been restored to working order. The mill is listed as a Rijksmonument, number 35674.[1]

History

De Oudkerkermolen was built in 1864. On 13 March 1955 it was badly damaged in a storm. Repairs cost ƒ6,734, including new sails at ƒ3,200 and a new Archimedes' screw at ƒ1,950. The repairs were carried out by millwright De Roos of Leeuwarden. Further repairs were made to the mill in 1963.[2]

The mill drained the 160 hectares (400 acres) Oudkerkerpolder until 1970.[2] A diesel engine formerly provided auxiliary power.[3] It was restored in 1975. Although in working order, the mill just pumps water in a circuit to demonstrate the process.[4]

Description

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

De Oudkerkermolen is what the Dutch describe as an "achtkante grondzeiler". It is a smock mill whose sails almost reach the ground. The mill has a single-storey brick base. The smock and cap are thatched. The mill is winded by a tailpole and winch. The four Common sails, which have a span of 15.68 metres (51 ft 5 in), are carried on a cast-iron windshaft. This was made by millwright H J Koning of Foxham in 1910. The windshaft also carries the brake wheel which has 50 cogs. This drives the wallower (29 cogs) at the top of the upright shaft. At the lower end of the upright shaft the crown wheel (37 cogs) drives the wooden Archimedes' screw via a gear wheel with 34 cogs. The Archimedes' screw has an axle diameter of 320 millimetres (1 ft 1 in) and is 1.24 metres (4 ft 1 in) diameter overall. It is inclined at 19½°. Each turn of the screw lifts 537 litres (118 imp gal) of water.[2]

Public access

De Oudkerkermolen is open to the public by appointment only.[5]

References

  1. Lua error in package.lua at line 80: module 'strict' not found. (Click on Technische gegevens" to view.)
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found. (Click on Geschiedenis" to view.)
  5. Lua error in package.lua at line 80: module 'strict' not found. (Click on Informatie" to view.)