EMD SD70 series

From Infogalactic: the planetary knowledge core
(Redirected from EMD SD70MAC)
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

EMD SD70 series
BNSF 9211 Lincoln, NE 10-19-2014.jpg
BNSF 9211 Lincoln, NE 10-19-2014
Type and origin
Power type Diesel-electric
Builder Electro-Motive Diesel (EMD)
Model SD70, SD70I, SD70M, SD70M-2, SD70MAC, SD70ACe, SD70ACe/LCi, SD70ACS, SD70ACe-T4, SD70ACE-BB, SD70ACe/45, SD70ACU
Build date 1992 – current
Total produced SD70: 122
SD70I: 26
SD70M: 1,609
SD70M-2: 331
SD70MAC: 1,109
SD70ACe: 2,091
SD70ACe/lc: 194
SD70ACS: 38
SD70ACe-T4: 103
SD70ACe-BB: 80
SD70ACe/45: 80
Specifications
AAR wheel arr C-C (UIC: Co'Co' ) B-B-B-B (UIC: Bo'Bo'Bo'Bo') for SD70ACe-BB
Gauge 4 ft 8 12 in (1,435 mm) standard gauge for the North American market;
1,600 mm (5 ft 3 in) for Brazil;
1,000 mm (3 ft 3 38 in) for Brazil
Prime mover EMD 16-710-G3 2-stroke diesel;
EMD 12-1010J 4-stroke diesel for SD70ACe-T4
Engine type V16;
V12 for SD70ACe-T4
Cylinders 16
12 for SD70ACe-T4
Transmission Diesel electric
Career
Operators see article
Numbers see article

The EMD SD70 is a series of diesel-electric locomotives produced by Electro-Motive Diesel in response to the GE Dash 9-44CW. Production commenced in late 1992[1][page needed] and since then over 4,000 units have been produced; most of these are the SD70M and SD70MAC models. All locomotives of this series are hood units with C-C trucks.

Prior to the SD70ACe and SD70M-2 models, all SD70 models were delivered with the self-steering HTCR radial truck.[note 1] The radial truck allows the axles to steer in curves which reduces wear on the wheels and railhead. With the introduction of the SD70ACe and SD70M-2 models, EMD introduced a new bolsterless non-radial HTSC truck as the standard truck for these models in an effort to reduce costs. The HTCR-4 radial truck is still an option.

All SD70ACe and SD70M-2 locomotives are, from the factory, equipped with one Nathan Airchime K5LLA-R1L airhorn mounted on a high-profile base. Due to height clearance restrictions, production models of the SD70ACe-T4 will be equipped with one K5LLA airhorn, mounted on a low-profile base, facing forward, and one "dual tone" K-13B airhorn, mounted over the rear headlight, facing rearward.

Models

SD70

Norfolk Southern Railway 2561 in September 2007

The SD70 uses the smaller standard cab or spartan cab, common on older 60 Series locomotives, instead of the larger, more modern comfort cab. This makes it hard to distinguish from the nearly-identical SD60, the only difference being the use of the HTCR radial truck instead of the HT-C truck mounted under the SD60. The main spotting feature is the difference in length between the two models - the SD60's 71 feet, 2 inches vs. the SD70's 72 feet, 4 inches. The SD70 also rides higher as its frame is approximately Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). higher than the SD60's. This model is equipped with direct current (DC) traction motors, which simplifies the locomotive's electrical system by obviating the need for computer-controlled inverters (as are required for alternating current (AC) power). It is equipped with the 4,000 horsepower (3,000 kW), 16-cylinder EMD 710 prime mover. One hundred and twenty-two examples of this model locomotive were produced for Norfolk Southern Railway (NS), Conrail (CR), Illinois Central Railroad (IC) and Southern Peru Copper Corporation (SPCC). Conrail's assets were split between Norfolk Southern (PRR) and CSX Transportation in 1999, and all 24 of Conrail's SD70 units went to NS. Other than the CR paint scheme these units were built to NS specifications and numbered (2557 - 2580) in series with their SD70's.

Production of the standard cab at EMD's London, Ontario plant ended in 1994. The 24 Conrail SD70s were assembled from kits at Conrail's (later NS's) Juniata Shops in Altoona, Pennsylvania, and the IC and SPCC SD70s were assembled from kits at Super Steel Schenectady. All SD70s are still in service with Norfolk Southern and Canadian National (CN), which merged Illinois Central in 1999. In February 2017, NS began a program to convert their SD70s from DC to AC, which will also have a new wide cab, and several other upgrades.

SD70M

A comparison of the various versions of the SD70's as operated by Union Pacific Railroad
UP SD70M no. 4352 at Fairbury, Nebraska in July 2014

The SD70M has a wide nose and a large comfort cab (officially known as the "North American Safety Cab"), allowing crew members to ride more comfortably inside of the locomotive than the older standard cab designs. There are two versions of this cab on SD70Ms: the Phase 1 cab, which was first introduced on the SD60M, and is standard on the SD80MAC and SD90MACs, and the Phase 2 cab, which is a boxier design similar to the original three-piece windscreen on the SD60M, which is shared with the Phase 2 SD90MAC, SD89MAC, and SD80ACe. The Phase 2 cab has a two-piece windscreen like the Phase 1 windscreen but the design of the nose is more boxy, with a taller square midsection for more headroom.

The SD70M is equipped with D90TR DC traction motors and the 710G3B prime mover.[2][page needed] They are capable of generating 109,000 lbf (480 kN) of continuous tractive effort.[3][page needed] From mid-2000, the SD70M was produced with SD45-style flared radiators allowing for the larger radiator cores needed for split-cooling. Split-cooling is a feature that separates the coolant circuit for the prime mover and the circuit for the air pumps and turbocharger. There are two versions of this radiator: the older version has two large radiator panels on each side, and the newer version has four square panels on each side. This modification was made in response to the enactment of the United States Environmental Protection Agency's (EPA) Tier 1 environmental regulations.

Production of the SD70M ceased in late 2004 as production of the SD70M-2 model began (the EPA's Tier 2 regulations went into effect on 1 January 2005). 1,609 examples of the SD70M model were produced. Purchasers included CSXT, New York Susquehanna & Western (NYSW; part of EMDX order no. 946531[4]), Norfolk Southern and Southern Pacific (SP; now part of the Union Pacific Railroad), but the vast majority were purchased by Union Pacific.

An order of SD70Ms made history when Union Pacific ordered 1000 units of the model (UP 4000 through UP 4999, inclusive). This order was later extended by nearly 500 additional units (UP 3999, and below) and (UP 5000, and above).

This locomotive model is also built for export, and is still catalogued by EMD (at 4,300 hp or 3,200 kW). CVG Ferrominera Orinoco has 6 SD70Ms that were built as an add-on order to UPs FIRE cab equipped SD70Ms. Companhia Vale do Rio Doce (CVRD) in Brazil has ordered 55 of this model for service in Carajas pulling trainloads of iron ore. Since CVRD track is gauged at 1,600 mm (5 ft 3 in), a wider bogie, the HTSC2, was designed for these units by EMD.[5]

SD70I

File:CN Loco No.5609.jpg
Canadian National SD70I locomotive 5609

The SD70I is a version of the SD70M which has been fitted with a cab that is isolated from the frame of the locomotive with rubber gaskets (officially known as a "WhisperCab"). The isolation reduces noise and vibration from the prime mover. A seam is visible across the nose and on the long hood where the cab connects with the body. 26 examples of this model locomotive were produced, all for Canadian National Railway. The WhisperCab feature was incorporated into some SD70MAC and later models.

SD70MAC

Transportación Ferroviaria Mexicana SD70MAC 1627 at Nueva Italia station
Conrail "White Smiley" SD-70MAC seen in Cleveland, Ohio with an autorack train

The SD70MAC (colloquially known as a "Mac" or a "70 Mac") is very similar to the SD70M and SD70I; the main difference being that the SD70MAC uses AC traction motors. Production of the model commenced in 1993, competing against GE's AC4400CW.[6][page needed] AC motors, while simpler and more reliable than DC motors, require expensive inverters to generate a variable-frequency AC signal, raising the locomotive's purchase cost substantially. The majority of SD70MAC models were produced with the 4,000 horsepower (3,000 kW) EMD 710 prime mover[7] while later units are rated at 4,300 horsepower (3,200 kW) and feature EMD SD45-style flared radiators. They were also offered with a head-end power generation system for passenger trains.[8]

The SD70MAC is no longer produced due to EPA regulations and has been replaced by the SD70ACe. 1,109 examples of this model were produced. It was purchased by Burlington Northern Railroad (now BNSF Railway), BNSF, Conrail (units now owned by CSX), CSX Transportation, Transportación Ferroviaria Mexicana (TFM; units now owned by Kansas City Southern Railway (KCS)), and the Alaska Railroad.

SD70ACe

BNSF Railway SD70ACe no. 8794 coupled to an SD70MAC, providing a good comparison of the two models.

The SD70ACe is the successor to the older SD70MAC. Built from 2004 to 2014 in the United States, the SD70ACe was originally designed to comply with EPA Tier 2 locomotive emissions regulations. Beginning in 2012, newly built SD70ACe's were EPA Tier 3 compliant.[9][page needed] SD70ACes are equipped with EMD's 16-710-G3C-T2 prime mover, rated at 4,300 horsepower (3,200 kW); later Tier 3 models are rated at 4,500 horsepower (3,400 kW).[10] They are rated at 157,000 lbf (700 kN) continuous tractive effort (191,000 lbf (850 kN) starting). Braking effort is rated at 106,000 lbf (470 kN).[10]

Although mechanically similar to earlier SD70 units, the SD70ACe rides on a new underframe and uses mostly new sheet metal above the frame. Electrical cables and air lines have been routed beneath the walkways on opposite sides, allowing easier access for maintenance. Continuing the designs of the SD80 and SD90 series, the radiator on the locomotive is nearly as wide as the cab, the center hood section is a step down below the roofline, and the dynamic brakes have been moved to the rear of the hood. The SD70ACe uses the cab design of late-model SD90MAC-H units, which uses rectangular window glass and is externally different from the two cab variations used on earlier SD70M and SD70MAC units. In 2008, EMD standardized the isolated cab on subsequent SD70ACe's after non-isolated cab units were restricted from leading on BNSF Railway due to excessive cab vibration.

Purchasers included ArcelorMittal, BNSF Railway, Canadian National Railway, CSX Transportation, Ferromex, Kansas City Southern Railway, Montana Rail Link, Norfolk Southern Railway, CVG Ferrominera Orinoco, MRS Brazil, Union Pacific Railroad, Quebec North Shore and Labrador Railway, BHP Billiton, and shortline Arkansas and Missouri Railroad.

Ferromex 4079 SD70ACe in León, Guanajuato

In 2012, EMD also built four models known as the SD70ACe-P6. These units, unlike previous SD70ACe's, have one inverter per axle on the trucks, rather than EMD's traditional one inverter per truck design. Four of EMD's SD70ACe-P6 demonstrators were sold to Canadian National Railway, numbered 8100-8103, and all have been repainted into company paint. The last unit (#8103) retained the demonstrator livery until late 2015 when it was spotted freshly repainted.[11]

In 2014, BNSF Railway took delivery of 20 SD70ACe-P4 units, numbered 8500-8519. This model was designed with a B1-1B wheel arrangement to compete with GE's ES44C4 model, which has an A1A-A1A wheel arrangement. Two of EMD's demonstrator SD70ACe-P4's went to Tacoma Rail in late 2014 for a 5-year lease.

On 1 January 2015, the United States Environmental Protection Agency's Tier 4 locomotive emission regulations went into effect. EMD could not successfully modify the SD70ACe's 2-stroke 710 series prime mover to be Tier 4 compliant, thus rendering the current Tier 3 compliant EMD SD70ACe illegal to build for use in the United States. EMD has continued building Tier 3 SD70ACe's for Ferromex (4100-4118), Ferrosur (4119-4133), and Kansas City Southern de Mexico (4200-4224) at Bombardier's Ciudad Sahagun, Mexico plant. These locomotives are restricted to Mexico-only operation and cannot cross the US border (just as Canadian National's newest Tier 3 GE ES44AC's are restricted to Canadian use only). 2014 was the final year of EMD producing SD70ACe's powered by the 710 series 2-stroke engines for use in the USA.

In March 2016, EMD replaced the standard cast HTCR-4 trucks on NS SD70ACe 1000 with the new fabricated HTCR-6 trucks for testing. UP and BNSF plan to test the new HTCR-6 trucks on some of their SD70ACe units also.

Union Pacific Railroad received 273 additional SD70ACe units in 2014 and 2016. These are referred to as SD70AH, because they are ballasted to 428,000 lbs instead of the standard "ACe's" 420,000 lbs.

SD70M-2

Canadian National SD70M-2 8880 in Harvey, Illinois in June 2010

The SD70M-2 is a DC traction version of the SD70ACe, and is nearly identical to the SD70ACe. Production began in 2005.[12][page needed] SD70M-2 models are equipped with the 16-710G3C-T2 prime mover which is rated at 4,300 horsepower (3,200 kW).[13]

The SD70M-2 was not a big seller, as most major carriers were purchasing AC traction locomotives exclusively by the time of its introduction. Only 331 SD70M-2's were built. Canadian National Railway owns 190 units, and 130 units are owned by Norfolk Southern Railway. 8 units owned by Electro-Motive Diesel and 3 units owned by CIT Financial were leased by Florida East Coast Railway until early 2015. CN 8964, built December 2010 was the last SD70M-2, and will most likely be the last new DC traction locomotive since holdouts, CN and NS, have embraced the AC traction concept.

SD70ACe-T4

The SD70ACe-T4 is the Tier 4 emissions standards-compliant version of the SD70ACe. The first locomotive was built in summer 2015, and made its debut at the Railway Interchange Expo in Minneapolis, Minnesota during the weekend of October 3–4, 2015. It features a new 4-stroke engine called the EMD 12-1010 - a V12 with 1010 cu.in displacement for each cylinder. This new prime mover has a two-stage turbocharger system consisting of three turbos; one turbo (the primary/high pressure turbo) for low-mid RPM and two turbos (the secondary/low pressure turbos) for mid-high RPM. The results of this setup are bigger power throughout the broader RPM range, better fuel efficiency, and lower emission. An EGR system is applied as well, allowing the engine to achieve Tier 4 without the use of urea after treatment. Another new feature of this engine is the Double-Walled Fuel Injection System that increases safety and provides simplified maintenance works.

This new engine is capable of producing 4,600 hp, but only 4,400 tractive horsepower.[14] With a new computer software for the on-board computer and one inverter per axle (or "P6"; EMD named it "Individual Axle Control") - unlike most of previous EMD locomotives that use one inverter per truck, the SD70ACe-T4 is capable of generating 200,000 lbf. (889.64 kN.) of starting tractive effort, and 175,000 lbf. (778.75 kN.) of continuous tractive effort. Meanwhile, its dynamic braking effort is as much as 105,000 lbf. (467.25 kN.) The amount of starting tractive effort is equal to that of the 6,000 hp SD90MAC-H while, on the other hand, its continuous tractive effort is higher than that of the SD90MAC-H (175,000 lbf. vs. 165,000 lbf.). Due to the "Individual Axle Control", the locomotive will have improved reliability performance and maintenance. The units are also equipped with "radial bogies" which offer increased adhesion and better ride quality.[14]

While it retains the basic SD70 designation, the locomotive has several major new features that set it apart from its successful ancestor such as a vibration-isolated powertrain, and alternator start capability. In addition, it features a newly redesigned cab reminiscent of the earlier SD70M, even bringing back the classic "teardrop" windshields first introduced on the FP45 in December 1967; new fabricated trucks; a longer frame (76 ft. 8 in / 23.37 m); longer radiators with three radiator fans instead of two; an additional step; and a smoother long hood roofline.[15][16][17][18]

As of November 2016, 15 SD70ACe-T4 demonstrators have been built. Union Pacific Railroad is the first customer for the SD70ACe-T4. In early November 2016, U.P. received units 3012-3014 as the first production SD70ACe-T4's officially assigned to active service. U.P. will eventually acquire 100 SD70ACe-T4's (No. 3000 to 3099). Some of the Union Pacific SD70ACe-T4's are classified as SD70AH, like the other SD70AH's they own. All 15 SD70ACe-T4 demonstrators, except for EMDX 1501, 1603 and 1604, are included in this total. EMDX 1501 will remain in Progress Rail Services ownership, used as a test bed. EMDX 1603 and 1604 - the SD70ACeP4-T4's - will go to BNSF Railway.

SD70ACe/LCi

BHP Billiton Iron Ore's 4308 & 4373 at Nelson Point yard, Port Hedland in April 2012

The SD70ACe/LCi is a low clearance, export version of the SD70ACe. The LCi in the model designation stands for Low Clearance international as these locomotives are designed to negotiate the tight clearances under the mine equipment. External differences between the SD70ACe and SD70ACe/LCi models include the addition of marker lights, number boxes lower in the body rather than on top of the cab, windscreen protector panels (to deflect abrasive iron ore when in mid train position), fire suppression canisters, louvre style vents, different horn and subtle differences with handrails.[19][page needed]

In 2004, BHP Billiton ordered a first batch of 14 SD70ACe/LCi locomotives for use on iron ore trains in the Pilbara region of Western Australia.[20][page needed] It operated in 2015 a fleet of 23 SD70ACe/LCi locomotives beside of 142 standard SD70ACe, from which the newest locomotives are built in 2014.[21]

The first member of the class (4300) was purchased for parts and dismantled upon arrival in Australia. This was because it was cheaper to purchase a complete locomotive than buy the components individually.[22][23] The first batch of SD70ACe/LCi's (4301-4313) was ordered in 2004 and named after sidings on the BHP system.[24][page needed][25] Since it did not have the newer, isolated cab of the second and subsequent batches it was traded in to the supplier for locomotives with newer cab assemblies.[21]

The second batch of locomotives (4314-4323) arrived between August and November 2006.

An order for a third batch of 13 SD70ACe/LCi's (4334-4346) was placed in August 2007, but such was the demand for locomotive power in the Pilbara region, a deal was done with BNSF Railway for BHP Billiton to purchase ten standard North American SD70ACes (4324-4333) that were in build as their 9166, 9167, 9184-9191. Construction was sufficiently advanced when the deal was concluded for them to have been painted, hence they were delivered in BNSF orange livery. Some modifications have been made to bring them in line with the rest of the fleet. A fifth batch of SD70ACe's (Numbers 4347-4355) was delivered in July 2009.[26][page needed][22]

An additional 18 units (numbers 4356-4373) were delivered in the second half of 2010, bringing the total of SD70ACe type locomotives in service to 72.[23] In March 2012, BHP Billiton ordered a further 80.[27]

In July 2012 fellow Pilbara operator, Fortescue Metals Group, took the delivery of the first of a fleet of 19, later extended to 21 (701-721).[23][28][29]

SD70ACS

Saudi Railway Company EMDX 3025 (behind 3024, 3023, 3017) heading north through St. Mary's, Ontario in October 2010

The SD70ACS is a 4,500 horsepower (3,400 kW) AC variant for heavy haul freight, used in desert environments. The first 25 units were ordered for Saudi Railway Company in April 2009 and assembled in the London, Ontario plant for delivery in the second half of 2010. Special features include a pulse filtration system, movable sand plows, EM2000 control system and FIRE display system.[30]

Mauritania's Société Nationale Industrielle et Minière placed a contract for six SD70ACS locomotives in October 2010.[31]

In July 2011 Etihad Rail ordered seven SD70ACS locomotives for delivery in 2012.[32]

SD70ACE-BB

The SD70ACE-BB is a narrow gauge version of the SD70ACe. In October 2015, EMD started producing SD70ACE-BB locomotives for Brazilian narrow gauge railroads. Two of these units were seen under testing on May 18, 2015 in Vespasiano-MG.[33]

SD70ACe/45

The SD70ACe/45 is a diesel-electric locomotive built by EMD plant in Sete Lagoas, MG Brazil. Different from the SD70ACe in North America, the SD70ACe/45 has a longer frame (76 ft. 6 in.) and three radiator fans on the radiator section since it uses the same car body of the SD80ACe produced by EMD plant in London, Canada to Vale mining in Brazil. It uses 1,600 mm (5 ft 3 in) gauge. 80 SD70ACe/45s had been built.

SD70ACu

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

File:NS SD70ACU 7248.jpg
NS SD70ACU 7248

The SD70ACu is a diesel-electric locomotive first built by EMD and later rebuilt by Norfolk Southern. It is originally an SD90MAC (or well-known as SD9043MAC) that has been rebuilt to renew its electrical components and replace the cab with the new EMD Phase-II cab to comply with the most recent safety requirements. These locomotives are similar to the SD70ACe model, but have a different prime mover, which is EMD's 4,300 hp (3,210 kW) 16-cylinder 710G engine, the same engine used on the SD70MAC. The SD70ACu has three radiator fans, retaining the original configuration of that of SD9043MAC instead of two radiator fans as SD70ACe has. The shape of the rear end of SD70ACu looks like a "Big T", which was the rear end shape of the SD9043MAC, while the rear end shape of SD70ACe is like an "arrow head" (from above). They also have the latest EMD cab that meets current FRA crash-worthiness standards. These locomotives also have the Ultra Cab II, locomotive speed limiter (LSL), and cab signals. 100 of the 110 units Norfolk Southern purchased were originally SD9043MACs previously operated by the Union Pacific Railroad. The other 10 units were acquired by a trade with Cit Group for MP15DC's. All NS-owned SD9043MACs are slowly being rebuilt by NS at its shops in Altoona, Pennsylvania. As of March 24, 2017, 68 SD70ACU units have been completed and released to active service.

Operators

North America

  • ArcelorMittal, operated by Cartier Railway
    • 5 SD70ACe units, numbered 9001-9005. Delivered in May 2013.
  • Alaska Railroad
    • 28 SD70MAC units, numbered 4001-4016 and 4317–4328.[34] The units numbered 4317–4328 have flared radiators for Tier 1 compliance and are equipped with head-end power (HEP) generators for passenger service.
  • Arkansas and Missouri Railroad
    • 3 SD70ACe units, numbered 70-72. Units are ex-EMDX 1201-1203.
  • BNSF Railway
    • 786 SD70MAC units, numbered 8800–8989, 9400–9499 and 9504–9999.[35] Unit 8876 is retired following a wreck. Units 9400–9716 are ex-Burlington Northern Railroad.
    • 640 SD70ACe units, numbered 8400-8499, 8520-8599, 8749-8799, 8990-9158, & 9160-9399.[35] 9159 wrecked, rebuilt, and renumbered 8749.
    • 20 SD70ACe-P4's, numbered 8500-8519.
    • 2 SD70ACeP4-T4 units, EMDX 1603 and 1604. Both units are still in road tests conducted by BNSF.
  • Canadian National Railway
    • 26 SD70I units, numbered 5600–5625.[36]
    • 190 SD70M-2 units, numbered 8000–8024 & 8800–8964. Units 8800-8964 are equipped for Distributed Power operation.[36]
    • 4 SD70ACe-P6 units, numbered 8100-8103. Units are ex-EMDX 1206, 1208-1210.
  • CIT Group
    • 3 SD70M-2 units, numbered 140–142.[37] All are ex-EMD demonstrators.
  • CSX Transportation
    • 25 SD70M units, numbered 4675–4699.[38] All are ex-EMD demonstrators.
    • Originally 220 SD70MAC units, numbered 4500–4589 and 4701–4830.[38] Units numbered 4575–4589 are ex-Conrail units. 16 of CSX's SD70MAC locomotives (units 4501-4506, 4510-4512, 4516-4520, 4522 & 4523) were sold to Four Rivers Transportation, 13 of which went to the Paducah & Louisville Railway, with the remaining 3 to the Evansville Western Railway (EVWR 4517, 4519 and 4520). PAL repainted three SD70MACs in special livery: one in University of Kentucky Blue & White colors to mark the school's 2012 NCAA Basketball Championship (PAL 2012, ex-4505). They painted a second unit into University of Louisville Red & White to mark their 2013 NCAA Basketball Championship (PAL 2013, ex-4506). The third special unit, PAL 4522, is also painted in University of Kentucky blue and white, and commemorates all 8 of UK's championship wins. All units are used in regular freight service, between Paducah and Louisville,KY.
    • 20 SD70ACe units, numbered 4831–4850.[38]
  • Electro-Motive Diesel Leasing
    • 3 SD70ACe units, numbered 1207, 2012, & 4223. 1207 is an SD70ACe-P4.
    • 1 SD70ACe-T4 unit, numbered 1501.
  • Ferromex
    • 97 SD70ACe units numbered 4000–4096.[39]
    • 34 SD70ACe units numbered 4100-4133, built in 2015. These units are not Tier 4 compliant and are thus restricted to Mexico. 4119-4133 are assigned to Ferrosur, and are specially equipped with experimental sheet-metal awnings or "elephant ears" over the radiator air intakes to combat excess heat and enhance engine cooling in the many tunnels through which they must operate.
  • Florida East Coast Railway
  • Illinois Central Railroad
    • 40 SD70 units, numbered 1000–1039.[36] Units 1006, 1013, 1014 & 1023 were wrecked and retired.
  • Kansas City Southern Railway
    • 75 SD70MAC units, numbered 3900–3902, 3904–3905, 3907, 3910–3916, 3918, 3920–3921, 3924–3926, 3928–3930, 3932, 3934–3935, 3937–3938, 3941–3942, 3944, 3946–3948, 3951, 3953, 3955, 3957, 3961–3964, 3966–3968, 3970, 3972–3973.[41] All are ex-Transportación Ferroviaria Mexicana (TFM) units.
    • 153 SD70ACe units, numbered 3997–4059, 4100–4129, & 4140-4199.[41] Units 3997–3999 are ex-EMD demonstrators.
  • Kansas City Southern de México
    • 75 SD70ACe units, numbered 4060–4099, 4130-4139, & 4200-4224. Units 4200-4224, built in 2015, are not Tier 4 compliant and are thus restricted to Mexico.
  • Luminant (formerly Texas Utitilies Generating Co.,TUGX)
    • 2 SD70ACe units, numbered 5308 & 5309. Units are ex-EMDX 1204 & 1205 respectively.
  • Montana Rail Link
    • 25 SD70ACe units, numbered 4300–4315 & 4400-4408.
  • Norfolk Southern Railway
    • 80 SD70 units, numbered 2501–2580.[42] Units 2557–2580 are ex-Conrail units, but built to NS specifications.
    • 68 SD70M units, numbered 2581–2648.[42]
    • 3 SD70M units, numbered 2797-2799. Units ex-New York, Susquehanna & Western 4050, 4052, 4054. Acquired in September 2014.
    • 130 SD70M-2 units, numbered 2649–2778.[42]
    • 175 SD70ACe units, numbered 1000–1174.[42] 1065-1074 painted in special historic "heritage" schemes honoring important NS predecessor roads.
    • 68 (eventually 110) SD70ACU units, rebuilt from Ex-UP and Ex-CIT SD90MACs. Other units are in service as SD9043MAC's or are stored.
  • Quebec North Shore and Labrador Railway
    • 23 SD70ACe units, numbered 501–523. Units 501-507 were built in December 2009; 508-513 were built in August 2011; and 514-523 were built in December 2012.[43][full citation needed]
  • Tacoma Rail
    • 2 SD70ACe-P4 units, numbered 7001 & 7002. Units are ex-EMDX 1211 & 1212.[44]
  • Union Pacific Railroad
    • 1,452 SD70M units, numbered 2001-2002, 3778–3984, 3986-4140, 4142-4689, 4692-5231 (Nos. 2001-2002 are ex 4690-4691, 3778 is ex 4141, and No. 3985 is occupied by steam locomotive 3985).[45] Unit 4014 has been renumbered to UPP 4014[citation needed] to free-up 4014 for UP's 4-8-8-4 Big Boy 4014 recently moved to Cheyenne for restoration, and eventual return to the active roster. Units 4545, 4687, 4811, 4855, & 4929 were wrecked and retired from service. Units 3974-3984 & 3986-3999 are ex-Southern Pacific 9800-9824.
    • 518 SD70ACe units, numbered 1982, 1983, 1988, 1989, 1995, 1996, 4141, 8309-8378, 8380-8382, 8384-8395, 8397-8422, 8424-8823.[45] The 19xx units comprise Union Pacific's "Heritage Fleet". Unit 1982 (ex-8379) wears the "Missouri Pacific Proud Heritage" livery. Unit 1983 (ex-8383) wears the "Western Pacific Proud Heritage" livery. Unit 1988 (ex-8396) wears the "Missouri-Kansas-Texas Proud Heritage" livery. Unit 1989 (ex-8521 (1st)) wears the "Denver & Rio Grande Western Proud Heritage" livery. Unit 1995 (ex-8522 (1st)) wears the "Chicago & North Western Proud Heritage" livery. Unit 1996 (ex-8523 (1st)) wears the "Southern Pacific Proud Heritage" livery. Unit 4141(ex-8423) wears the "George Bush 41st President" livery.[45] Numbers 8521-8523 were re-issued to subsequent new locomotives. 273 additional ACe units, numbered 8824-9096, were built in 2014 and 2016. Classified by UP as SD70AH's they are ballasted to 428,000 lbs. instead of the standard 420,000 lbs. 8824-8996 were built in 2014, and Tier 4 credit units 8997-9096 were built in 2016.
    • 100 SD70ACe-T4 units, numbered 3000-3099. When testing on other carriers is completed, former EMDX demonstrators 1502-1505, 1601, 1602, and 1605-1610 will become UP 3000-3011. UP 3012-3099 will be the first production units of this model. EMDX 1501 will be retained by Progress Rail Services as a test bed unit. EMDX 1603 and 1604 are "P4's" destined for BNSF Railway.

International

Gallery

Notes

  1. Most other EMD six-axle locomotives were mounted on EMD's HT-C truck.[citation needed]

Footnotes

  1. Solomon 2011
  2. Solomon 2006
  3. Solomon 2006
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Solomon 2011
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Solomon 2011
  10. 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. http://www.railpictures.ca/?attachment_id=21116
  12. Solomon 2011
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. 14.0 14.1 http://s7d2.scene7.com/is/content/Caterpillar/C10678841
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Montgomery 2009
  20. Montgomery 2009
  21. 21.0 21.1 Lua error in package.lua at line 80: module 'strict' not found.
  22. 22.0 22.1 Oberg 2010, pp. 435–436
  23. 23.0 23.1 23.2 23.3 23.4 Clark 2010, pp. 215–218
  24. Montgomery 2009
  25. BHP Billiton Loco Roster Pilbara Railways
  26. Montgomery 2009
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Downer to build 19 locomotives for Fortescue Railway Technology 26 June 2012
  29. 29.0 29.1 Fortescue Rail Fact Sheet Fortescue Metals Group May 2013
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. https://www.youtube.com/watch?v=E7BOuw6gtPk
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. 35.0 35.1 Lua error in package.lua at line 80: module 'strict' not found.
  36. 36.0 36.1 36.2 Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. 38.0 38.1 38.2 Lua error in package.lua at line 80: module 'strict' not found.
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. 41.0 41.1 Lua error in package.lua at line 80: module 'strict' not found.
  42. 42.0 42.1 42.2 42.3 Lua error in package.lua at line 80: module 'strict' not found.
  43. Diesel Era Magazine, October–November 2013, vol.24-5
  44. http://trn.trains.com/news/news-wire/2014/09/tacoma-rail-acquires-two-sd70ace-p4s
  45. 45.0 45.1 45.2 Lua error in package.lua at line 80: module 'strict' not found.
  46. 46.0 46.1 46.2 46.3 Lua error in package.lua at line 80: module 'strict' not found. (subscription required)
  47. Lua error in package.lua at line 80: module 'strict' not found. (subscription required)
  48. Lua error in package.lua at line 80: module 'strict' not found. (subscription required)

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

Further reading