Edison–Lalande cell

From Infogalactic: the planetary knowledge core
(Redirected from Edison-Lalande cell)
Jump to: navigation, search
Edison–Lalande cell

The Edison–Lalande cell was a type of alkaline primary battery developed by Thomas Edison from an earlier design by Felix Lalande and Georges Chaperon.[1][2] It consisted of plates of copper oxide and zinc in a solution of potassium hydroxide. The cell voltage was low (about 0.75 volts) but the internal resistance was also low so these cells were capable of delivering large currents.[3]

History

Lalande–Chaperon cell

In 1880, the manufacturer De Branville and Company of 25 rue de la Montagne Sainte-Geneviève, Paris exploited the patent of Lalande and Chaperon to build copper oxide batteries.[4] In 1887, the French submarine Gymnote (Q1) was built. The boat was originally fitted with 540 Lalande–Chaperon alkaline cells which used zinc and copper oxide electrodes with potassium hydroxide electrolyte, manufactured by Coumelin, Desmazures and Baillache.

Edison–Lalande cell

Edison improved on the Lalande–Chaperon cell by replacing powdered copper oxide with copper oxide briquettes.

Poerscke–Wedekind cell

Another modification to the Lalande-type cell was patented by Heinrich Poerscke and Gustav Wedekind in 1905, British patent GB190416751.[5] In this cell, the copper oxide depolarizer was pasted on the inside of a cast iron pot. When the depolarizer was exhausted, the cell was dismantled and the liquid was poured out. The pot was then heated in air to re-oxidize the deposited copper to copper oxide. The Neotherm cell, by Siemens, was similar.[6][7]

Chemistry

The zinc dissolves in the hydroxide solution to form zincate, consuming hydroxide in the process.

Zn0 + 4OH -> [Zn(OH4)]2− + 2e

half of the hydroxides are replenished by the hydration and reduction of the copper oxide.

CuO + H2O + 2e -> Cu0 + 2OH

Applications

Applications for Lalande-type batteries included submarine power (see above), railway signalling.[8] and powering Edison's electric fans and phonographs.[9]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Ayrton, W.E. and Mather, T. Practical Electricity, Cassell and Company, London, 1911, pp 196–197
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. http://archive.org/stream/electricaljourna63lond/electricaljourna63lond_djvu.txt
  7. http://www.ebooksread.com/authors-eng/arthur-john-allmand/the-principles-of-applied-electrochemistry-hci/page-20-the-principles-of-applied-electrochemistry-hci.shtml
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.