FRV Clupea
FRV Clupea operating in a Scottish sea loch
|
|
| History | |
|---|---|
 |
|
| Name: | Clupea |
| Namesake: | Clupea |
| Builder: | Hall, Russell & Company, Aberdeen |
| Yard number: | 940[1] |
| Laid down: | 1968 |
| Refit: | 1988 |
| Homeport: | Fraserburgh |
| Fate: | Sold |
| General characteristics | |
| Displacement: | 381.68 t (376 long tons) |
| Length: | 32.1 m (105 ft 4 in) |
| Beam: | 7.39 m (24 ft 3 in) |
| Draught: | 3.51 m (11 ft 6 in) |
| Propulsion: | Lister Blackstone ERS 8M 492 kW (660 hp) |
| Speed: | 11.5 knots (13.2 mph; 21.3 km/h) |
| Endurance: | 12 days |
| Complement: | 16 |
FRV Clupea is a small, inshore fisheries research vessel, formerly of the Fisheries Research Services. She was based at the port of Fraserburgh and operated mainly on the Scottish west coast on behalf of the Scottish Executive.
History
Clupea was commissioned in 1968. Measuring 32 m (100 ft) and drawing 3.5 m (11 ft 6 in), she is a good size for conducting research inside the constricted space of a sea loch. For research in offshore areas and the North Sea, the larger, more modern, FRV Scotia is used.
Clupea has been replaced by FRV Alba-Na-Mara.[2] She has been sold to a private company.[citation needed]
Layout
Clupea is equipped with winches, reel drums and an A-frame, allowing her to tow a range of fishing gear. Deck cranes allow the deployment of water sampling equipment and benthic grabs.
As a small vessel requiring space for equipment and laboratories, Clupea can only accommodate four officers, six crew and six scientists.
