HMAS Canberra (L02)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Canberra at anchor in Jervis Bay January 2016
Canberra at anchor in Jervis Bay January 2016
History
Australia
Namesake: City of Canberra
Builder: Navantia, Ferrol, Spain and BAE Systems Australia, Williamstown, Victoria
Laid down: 23 September 2009
Launched: 17 February 2011
Commissioned: 28 November 2014
Homeport: Fleet Base East
Motto: For Queen and Country
Honours and
awards:
Battle honours: five inherited battle honours
Status: Active as of 2016
Badge: Ship's badge
General characteristics
Class & type: Canberra-class Landing Helicopter Dock
Displacement: 27,500 tonnes (30,300 short tons; 27,100 long tons) at full load
Length: 230.82 m (757.3 ft)
Beam: 32.0 m (105.0 ft)
Draft: 7.08 m (23.2 ft)
Propulsion:
Speed:
  • Over 20 knots (37 km/h; 23 mph) maximum
  • 19 knots (35 km/h; 22 mph) full-load sustained
  • 15 knots (28 km/h; 17 mph) economical
Range: 9,000 nautical miles (17,000 km; 10,000 mi) at 15 knots (28 km/h; 17 mph)
Boats & landing
craft carried:
4 × LLC
Capacity:
  • Up to 110 vehicles
  • Heavy vehicle deck: 1,410 m2 (15,200 sq ft)
  • Light vehicle deck: 1,880 m2 (20,200 sq ft)
Troops: 1,046
Complement: 358 personnel; 293 RAN, 62 Australian Army, 3 RAAF
Sensors and
processing systems:
Giraffe AMB radar, Saab 9LV combat system
Electronic warfare
& decoys:
Armament:
Aircraft carried:
  • 8 helicopters (standard)
  • 18 helicopters (maximum hangar space)
Aviation facilities: Flight deck with 13 degree ski-jump, 6 in-line deck landing spots

HMAS Canberra (L02) is the first of two Canberra-class landing helicopter dock (LHD) ships constructed for the Royal Australian Navy (RAN). Construction of the ship started in Spain in 2008, with the hull launched by Navantia in 2011. The hull was then transported to Australia in late 2012 for completion by BAE Systems Australia. Canberra was commissioned on 28 November 2014.

Design

Canberra's flight deck and island superstructure

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The Canberra class design is based on the warship Juan Carlos I, built by Navantia for the Spanish Navy.[1] The contract was awarded to Navantia and Australian company Tenix Defence following a request for tender which ran from February 2004 to June 2007, beating the enlarged Mistral class design offered by French company Direction des Constructions Navales.[1][2][3] Canberra has the same physical dimensions as Juan Carlos I, but differs in the design of the island superstructure and the internal layout, in order to meet Australian conditions and requirements.[4] Unlike the Spanish vessel, the Australian ships are built to meet Lloyd's Naval Rules.[4]

The Canberra-class vessels are 230.82 metres (757.3 ft) long overall, with a maximum beam of 32 metres (105 ft), and a maximum draught of 7.08 metres (23.2 ft).[5] At full load, Canberra will displace 27,500 tonnes (27,100 long tons; 30,300 short tons), making her the largest vessel to serve in the RAN.[5] Propulsion is provided by two Siemens 11-megawatt (15,000 hp) azimuth thrusters, each with an onboard electric motor, driving two 4.5-metre (15 ft) diameter propellers.[5][6] The electricity is provided by a Combined diesel and gas system, with a single General Electric CM2500 turbine producing 19,160 kilowatts (25,690 hp), supported by two MAN 16V32/40 diesel generators providing 7,448 kilowatts (9,988 hp).[5] Maximum speed is over 20 knots (37 km/h; 23 mph), with a maximum sustainable full-load speed of 19 knots (35 km/h; 22 mph), and an economical cruising speed of 15 knots (28 km/h; 17 mph).[5] Economical range is 9,000 nautical miles (17,000 km; 10,000 mi).[5]

Each ship is fitted with a Saab 9LV Mark 4 combat management system.[4] The sensor suite includes a Sea Giraffe 3D surveillance radar, and a Vampir NG infrared search and track system.[4] For self-defence, the LHDs will be fitted with four Rafael Typhoon 25 mm remote weapons systems (one in each corner of the flight deck),[7] six 12.7 mm machine guns, an AN/SLQ-25 Nixie towed torpedo decoy, and a Nulka missile decoy.[5] Defence against aircraft and larger targets is to be provided by escort vessels and air support from the Royal Australian Air Force (RAAF).[7] The ships' companies will consist of 358 personnel; 293 RAN, 62 Australian Army, and 3 RAAF.[8]

The LHDs will transport 1,046 soldiers and their equipment.[8] Canberra will be capable of deploying a reinforced company of up to 220 soldiers at a time by airlift.[4] Two vehicle decks (one for light vehicles, the other for heavy vehicles and tanks) have areas of 1,880 square metres (20,200 sq ft) and 1,410 square metres (15,200 sq ft) respectively, and between them can accommodate up to 110 vehicles.[5] The well deck will carry up to four LHD Landing Craft (LLC), which can be launched and recovered in conditions up to Sea State 4.[5][6] The flight deck can operate six MRH-90-size helicopters or four Chinook-size helicopters simultaneously, in conditions up to Sea State 5.[7] A mix of MRH-90 transport helicopters and S-70B Seahawk anti-submarine helicopters will be carried: up to eight can be stored in the hangar deck, and the light vehicle deck can be repurposed to fit another ten.[5][9] The ski-jump ramp of Juan Carlos I has been retained for the RAN ships, although fixed-wing flight operations are not planned for the ships.[8][10]

Construction

Construction of Canberra began in September 2008, when the first steel was cut.[3] The first three of 104 hull 'blocks' were laid down by Navantia at Ferrol in northern Spain on 23 September 2010.[3] The hull was launched on 17 February 2011 by Vicki Coates, the widow of Rear Admiral Nigel Coates, a former commanding officer of the previous HMAS Canberra.[11][12]

The hull of Canberra being floated onto the lift ship MV Blue Marlin, prior to sailing from Spain.

After the completion of the hull up to the level of the flight deck, Canberra was transported to Williamstown, Victoria.[1][4][8] Canberra's hull was floated onto the heavy lift ship MV Blue Marlin on 4 August 2012, with Blue Marlin departing on 17 August.[13][14] The heavy lift ship sailed via the Cape of Good Hope to avoid the risk of the ship and her cargo being hijacked by Somali pirates.[15] The decision to avoid the shorter route via the Suez Canal and Horn of Africa was made because other options to protect Blue Marlin and Canberra were unworkable: the frigate Anzac could not be diverted from anti-piracy duties in the region to provide a dedicated escort, and Dutch authorities objected to the presence of armed military or security personnel aboard the Dutch-flagged heavy lift ship.[15] Canberra and Blue Marlin arrived in Port Phillip on 17 October.[16] At Williamstown, the installation of Canberra's island superstructure and the internal fitout of the hull was completed by BAE Systems Australia (which acquired Tenix in mid 2008).[1][4][8]

The ship was officially christened on 15 February 2013.[17] BAE continued to build the vessel in Williamstown, Victoria integrating C3 and sensors to the ship's superstructures.[18] Canberra commenced sea trials on 3 March 2014, sailing under power for the first time.[19] The trials program included a visit to Fleet Base East in Sydney for drydocking tests, before returning to Williamstown for communications and weapons testing.[19] The first phase of the trials resulted in vibration damage to decking when the thruster pods were run independently at high speed (instead of in tandem, as designed), and a melted circuit breaker board when primary and emergency power systems were activated simultaneously, along with the discovery of a crack in the hull from the delivery voyage, and excessively corroded propeller nuts.[20] The second phase of contractor-run sea trials began in July, after repairs were made, and had concluded by early September.[20][21]

Canberra was handed over by BAE Systems to the Defence Materiel Organisation on 9 October 2014.[22] The ship was commissioned on 28 November 2014 at Fleet Base East.[23] Although identified as "LHD01" during construction, Canberra received the pennant number "L02" on commissioning; the pennant number corresponding to that used by the frigate of the same name.[24][25]

Operational history

Canberra berthed at Fleet Base East in June 2015

Canberra was the centrepiece of Australia Day celebrations in Sydney on 26 January 2015.[26] In March 2015, the ship was designated the flagship of the RAN.[27]

In February 2016, the ship was deployed from Fleet Base East initially to Brisbane in Queensland where it loaded a Royal Australian Army Engineer squadron and equipment including beach landing capabilities, water purification equipment and other essential engineering stores and then it sailed to Fiji on its first humanitarian mission after a tropical cyclone hit the country on February 20. The LHD was carrying 50 tonnes of humanitarian supplies including food, water, and medical equipment as well as more than 850 personnel from the Australian Defence Force. Embarked with the ship were three MRH-90 helicopters to support Australian operations. The Canberra joined other ADF assets to help with relief efforts.[28] Other forces deployed to Fiji were six Royal Australian AirForce C-17A and C-130J aircraft which brought some initial MRH-90 helicopters and key support personnel to Fiji airport as an immediate Australian airlift response.[citation needed]

Citations

  1. 1.0 1.1 1.2 1.3 Brown, Spanish designs are Australia's choice for warship programmes
  2. Borgu, Capability of First Resort?, pp. 5–6
  3. 3.0 3.1 3.2 Fish, First Australian LHD takes shape
  4. 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Fish, Amphibious assault ships
  5. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 Royal Australian Navy, Amphibious Assault Ship (LHD)
  6. 6.0 6.1 Amphibious Ships, in Semaphore, p. 2
  7. 7.0 7.1 7.2 Defense Industry Daily, Australia's Canberra class LHDs
  8. 8.0 8.1 8.2 8.3 8.4 Kerr, Amphibious Ambitions
  9. Gillis, Interview. Landing Helicopter Dock Project – Canberra Class, pp. 28–9
  10. Borgu, Capability of First Resort?, p. 11
  11. Department of Defence, LHD launch paves the way for amphibious transformation
  12. Cavas, Australia's Largest Ship Launched
  13. Navantia efectúa con éxito el ´encaje´ del ´Canberra´, in Laopinióncoruña
  14. El "Blue Marlin", abandonando el puerto exterior de A Coruña, in La voz de Galicia
  15. 15.0 15.1 Stewart, Warship's 12,000-mile detour gives high-seas pirates a wide berth
  16. Huge Navy ship hull arrives in Victoria, in ABC News
  17. Lillebuen & AAP, Navy gets new helicopter landing dock ship
  18. Perrett, Australia's Biggest-Ever Warships Still On Track
  19. 19.0 19.1 Kennedy, Canberra's size and power tested at sea trials
  20. 20.0 20.1 McPhedran, A brand new 27,000 tonne Australian Navy ship was damaged during maiden sea trials
  21. Kennedy, Canberra sea trials a success
  22. Kennedy, First Landing Helicopter Dock accepted by Defence Materiel Organisation
  23. ABC News, HMAS Canberra enters commission into Australian Navy at Sydney ceremony
  24. On the way to Australia, in Navy News
  25. Fish, Steel cut for second Australian LHD
  26. ABC News, Australia Day 2015: Whip cracking, lamington eating, thong throwing and barbies feature as Australians celebrate around the country
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.

References

Journal articles and papers
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
News articles
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
Websites and other sources
  • Lua error in package.lua at line 80: module 'strict' not found.[verification needed]
  • Lua error in package.lua at line 80: module 'strict' not found.