HMS Penn (G77)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
300px
HMS Penn underway in coastal waters.
History
United Kingdom
Name: HMS Penn
Ordered: 20 October 1939
Builder: Vickers Armstrong
Laid down: 26 December 1939
Launched: 12 February 1941
Commissioned: 10 February 1942
Identification: Pennant number: G77
Fate: Sold for scrap 30 October 1950.
General characteristics
Class & type: P-class destroyer
Displacement:
  • 1,640 long tons (1,666 t) standard
  • 2,250 long tons (2,286 t) full
Length: 345 ft (105 m) o/a
Beam: 35 ft (11 m)
Draught: 12 ft 3 in (3.73 m)
Installed power:
Propulsion: 2 shafts; 2 × steam turbines
Speed: 36 knots (67 km/h; 41 mph)
Range: 3,850 nautical miles (7,130 km; 4,430 mi) at 20 knots (37 km/h; 23 mph)
Complement: 176
Armament:

HMS Penn was a P-class destroyer built for the Royal Navy during the Second World War.

Description

The P-class destroyers were repeats of the preceding O class, except that they were armed with 4-inch (102 mm) anti-aircraft guns. They displaced 1,640 long tons (1,670 t) at standard load and 2,250 long tons (2,290 t) at deep load. The ships had an overall length of 345 feet (105.2 m), a beam of 35 feet (10.7 m) and a deep draught of 12 feet 3 inches (3.7 m). They were powered by two Parsons geared steam turbines, each driving one propeller shaft, using steam provided by two Admiralty three-drum boilers. The turbines developed a total of 40,000 shaft horsepower (30,000 kW) and gave a maximum speed of 36 knots (67 km/h; 41 mph). The ships carried a maximum of 500 long tons (510 t) of fuel oil that gave them a range of 3,850 nautical miles (7,130 km; 4,430 mi) at 20 knots (37 km/h; 23 mph). The ships' complement was 176 officers and men.[1]

Penn was armed with four QF 4-inch Mark V guns in single mounts, two pairs [superfiring] fore and aft. Her light anti-aircraft suite was composed of one quadruple mount for 2-pounder "pom-pom" guns and four single Oerlikon 20 mm cannon. The ship was fitted with two above-water quadruple mount for 21-inch (533 mm) torpedoes.[2] The ship was fitted with four depth charge throwers and two racks for 70 depth charges.[1]

Construction and career

Penn was ordered under the Wartime Emergency Programme and was laid down at the Newcastle-on-Tyne yard of Vickers Armstrong on 26 December 1939. Penn was launched on 12 February 1941. She was commissioned into the fleet on 10 February 1942. In that year she was adopted by the borough of Camberwell in London as part of Warship Week.

Penn was involved in Operation Pedestal, a convoy to bring much needed reinforcements to Malta. Captained by Acting Commander James Hamilton Swain, during the course of this operation, Penn helped tow the damaged SS Ohio with her vital supplies of fuel into Grand Harbour, Valletta. Commander Swain was mentioned in dispatches and was also awarded the Distinguished Service Order (DSO) for the part he played in Operation Pedestal.

On 16/17 October 1943 Penn with the destroyer Jervis sank the German submarine chaser UJ-2109 at Kalymnos. On 7 November 1943 Penn with sister ship Pathfinder sank the German submarine trap GA45 off Amorgos, Greece.

On 15 June 1945, Penn with the destroyer Paladin, sank a Japanese landing craft off the Northwest coast of Sumatra.

In November 1945 Penn was in the East Indies, being used as an Air Target Ship. In February 1947 she was still part of the British Pacific Fleet and was attached to the 4th Submarine Flotilla. At the end of the year she returned to the UK and reduced to reserve at Harwich.

In April 1949 she was used for ship target trials and damage control trials. She was sold for scrap on 30 October 1950 and broken up at Troon.[3]

Notes

  1. 1.0 1.1 Lenton, p. 172
  2. Whitley, pp. 124–25
  3. Critchley, Mike, "British Warships Since 1945: Part 3: Destroyers", Maritime Books: Liskeard, UK, 1982. ISBN 0-9506323-9-2, page 20

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.