|Part of a series on|
High-speed rail is a type of rail transport that operates significantly faster than traditional rail traffic, using an integrated system of specialized rolling stock and dedicated tracks. While there is no single standard that applies worldwide, new lines in excess of 250 km/hr and existing lines in excess of 200 km/hr are widely considered to be high-speed, with some extending the definition to include much lower speeds (e.g. 160 km/hr) in areas for which these speeds still represent significant improvements. The first such system began operations in Japan in 1964 and was widely known as the bullet train. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates a large turning radius in its design.
Many countries have developed high-speed rail to connect major cities, including Austria, Belgium, China, France, Germany, Italy, Japan, Poland, Portugal, Russia, South Korea, Spain, Sweden, Taiwan, Turkey, United Kingdom, United States and Uzbekistan. Only in Europe does HSR cross international borders. China has 19,000 km of HSR as of December 2015, accounting for two thirds of the world's total.
While high-speed rail is usually designed for passenger travel, some high-speed systems also offer freight service.
- 1 Definitions
- 2 History
- 2.1 Early research
- 2.2 Breakthrough: The Shinkansen
- 2.3 Revival in Europe and North America
- 2.4 Evolution in Europe
- 2.5 Evolution in North America
- 2.6 Expansion in East Asia
- 2.7 Middle East/Central Asia
- 2.8 Africa
- 3 Network
- 4 Rolling stock
- 5 Comparison with other modes of transport
- 6 Accidents
- 7 Ridership
- 8 Records
- 9 Markets
- 10 See also
- 11 References
- 12 Further reading
- 13 External links
Multiple definitions for high-speed rail are in use worldwide.
- Infrastructure: track built specially for high-speed travel or specially upgraded for high-speed travel.
- Minimum Speed Limit: Minimum speed of 250 km/h (155 mph) on lines specially built for high speed and of order 200 km/h (124 mph) on existing lines which have been specially upgraded. This must apply to at least one section of the line. Rolling stock must have a minimum speed of at least 200 km/h (124 mph) to be considered high speed.
- Operating conditions: Rolling stock must be designed alongside its infrastructure for complete compatibility, safety and quality of service.
The International Union of Railways (UIC) prefers to use "definitions" (plural) because they consider that there is no single standard definition of high-speed rail, nor even standard usage of the terms ("high speed", or "very high speed"). They make use of the European EC Directive 96/48, stating that high speed is a combination of all the elements which constitute the system: infrastructure, rolling stock and operating conditions. The International Union of Railways states that high-speed rail is a set of unique features, not merely a train travelling above a particular speed. Many conventionally hauled trains are able to reach 200 km/h (124 mph) in commercial service but are not considered to be high-speed trains. These include the French SNCF Intercités and German DB IC.
National domestic standards may vary from the international ones.
Railways were the first form of rapid land transportation and had an effective monopoly on passenger traffic until the development of the motor car and airliners in the early-mid 20th century. Speed had always been an important factor for railroads and they constantly tried to achieve higher speeds and decrease journey times. Rail transportation in the late 19th Century was not much slower than non high-speed trains today and many railroads regularly operated relatively fast express trains which averaged speeds of around 100 km/h (62 mph).
High-speed rail development began in Germany in 1899 when the Prussian state railway joined with ten electrical and engineering firms and electrified 72 kilometres (45 mi) of military owned railway between Marienfelde and Zossen. The line used three-phase current at 10 kilovolts and 45 Hz.
The Van der Zypen & Charlier company of Deutz, Cologne built two railcars, one fitted with electrical equipment from Siemens-Halske, the second with equipment from Allgemeine Elektricitäts-Gesellschaft (AEG), that were tested on the Marienfelde–Zossen line during 1902 and 1903.
On 23 October 1903, the S&H-equipped railcar achieved a speed of 206.7 km/h (128.4 mph) and on 27 October the AEG-equipped railcar achieved 210.2 km/h (130.6 mph). These trains demonstrated the feasibility of electric high-speed rail; however, regularly scheduled electric high-speed rail travel was still more than 30 years away.
The high-speed dream
After the breakthrough of electric railroading, it was clearly the infrastructure – especially the cost of it – which hampered the high-speed rail. Several disasters happened – derailments, head-on collisions on single-track lines, collisions with road traffic at grade crossings, etc. The physical laws were well-known, i.e. if the speed was doubled, the curve radii should be quadrupled; the same was true for the acceleration and braking distances.
In 1891 the engineer Károly Zipernowsky purposed a high-speed line Vienna–Budapest, bound for electric railcars at 250 km/h (155 mph). In 1893 Dr. Wellington Adams purposed an air-line Chicago–St. Louis (252 miles (406 km)). At a speed of "only" 100 mph (160 km/h), he was more modest than Zipernowsky – and more realistic, according to General Electric.
Probably, the first high-speed line was the 72 km Marienfelde–Zossen military railway, own by the Prussian State Railway, and from 1899 on used to test electric railcars. Alexander C. Miller had greater ambitions. In 1906, he launched the Chicago-New York Electric Air Line Railroad project to reduce the running time between the two big cities to ten hours by using electric 100 mph (160 km/h) locomotives. After seven years of effort, however, less than 30 miles (<50 km) of arrow-straight track was finished. A part of the line still is used as one of USA's last interurbans.
The high-speed interurbans
In the USA, some of the interurbans (i.e. trams or streetcars which run from city to city) of the early 20th century were really high-speed for its time (also Europe had and still do have some interurbans). Several high-speed rail technologicies have their origin on the interurban scene.
In 1903 – 30 years before the conventional railways started to streamline their trains – the officials of the Louisiana Purchase Exposition organized the Electric Railway Test Commission to conduct a series of tests to develop a carbody design that would reduce wind resistance at high speeds. A long series of tests was carried. In 1905, St. Louis Car Company built a railcar for the traction magnate Henry Huntington, capable of speeds approaching 100 mph. Once it ran 20 miles (32 km) between Los Angeles and Long Beach in 15 minutes, an average speed of 80 mph (almost 130 kph). But it was too heavy for much of the tracks. Instead, Cincinnati Car Company, J.G.Brill and others pioneered lightweight constructions, use of aluminium alloys, and low-level bogies which could operate smoothly at extremely high speeds on rough interurban tracks. Westinghouse and General Electric designed motors compact enough to be mounted on the bogies. From 1930 on, the Red Devils from Cincinnati Car Company and a some other interurban railcars reached about 145 kmph (90 mph) in commercial traffic. The Red Devils weighed only 22 tons though they could seat 44 passengers.
Extensive wind tunnel research – the first in the railway industry – was done before J.G.Brill in 1931 built the Bullet cars for Philadelphia and Western Railroad (P&W). They were capable to run at 92 mph. Some of them were almost 60 years in service. P&W's Norristown High Speed Line is still in use, almost 110 years after P&W in 1907 opened their double-track Upper Darby–Strafford line without a single grade crossing with roads or other railways. The entire line was governed by an absolute block signal system.
Early German high-speed network
On May 15, 1933, the Deutsche Reichsbahn-Gesellschaft company introduced the diesel-powered "Fliegender Hamburger" in regular service between Hamburg and Berlin (286 km), thereby achieving a new top speed for a regular service, with a top speed of 160 km/h (99 mph). This train was a streamlined multi-powered unit, albeit diesel, and used Jakobs bogies.
Following the success of the Hamburg line, the steam-powered Henschel-Wegmann Train was developed and introduced in June 1936 for service from Berlin to Dresden, with a regular top speed of 160 km/h (100 mph). Incidentally no train service since the cancelation of this express train in 1939 has traveled between the two cities in a faster time as of 2015.
Further development allowed the usage of these "Fliegenden Züge" (flying trains) on a rail network across Germany. The "Diesel-Schnelltriebwagen-Netz" had been in the planning since 1934 but it never reached its envisaged size.
The American Streamliners
On 26 May 1934, one year after Fliegender Hamburger introduction, the Burlington Railroad's set an average speed record on long distance with their new streamlined train, the Zephyr, at 124 km/h (77 mph) with peaks at 185 km/h (115 mph). The Zephyr was made of stainless steel, and like the Fliegender Hamburger, was diesel powered, articulated with Jacobs bogies, and could reach 160 km/h (99 mph) as commercial speed.
In 1935, the Milwaukee Road introduced the Morning Hiawatha service, hauled at 160 km/h (99 mph) by steam locomotives. These were the last "high-speed" trains to use steam power. In 1936, the Twin Cities Zephyr entered service, from Chicago to Minneapolis, with an average speed of 101 km/h (63 mph).
Many of these streamliners posted travel times comparable to or even better than their modern Amtrak successors, which are limited to 79 mph top speed on most of the network.
The Italian electric and the last steam record
The German high-speed service was followed in Italy in 1938 with an electric-multiple-unit ETR 200, designed for 200 km/h (124 mph), between Bologna and Naples. It too reached 160 km/h (99 mph) in commercial service, and achieved a world mean speed record of 203 km/h (126 mph) near Milan in 1938.
In Great Britain in the same year, the streamlined steam locomotive Mallard achieved the official world speed record for steam locomotives at 125.88 mph (202.58 km/h). The external combustion engines and boilers on steam locomotives were large, heavy and time and labor-intensive to maintain, and the days of steam for high speed were numbered.
The introduction of the Talgo system
In 1945, a Spanish engineer, Alejandro Goicoechea, developed a streamlined articulated train able to run on existing tracks at higher speeds than contemporary passenger trains. This was achieved by providing the locomotive and cars with a unique axle system that used one axle set per car end, connected by a Y-bar coupler. Amongst other advantages, the centre of mass was only half as high as usual. This system became famous under the name of Talgo (Tren Articulado Ligero Goicoechea Oriol), and for half a century was the main Spanish provider of high-speed trains.
The first above 300km/h developments
In the early 1950s, the French National Railway started to receive their new powerful CC 7100 electric locomotives, and began to study and evaluate running at higher speeds. In 1954, the CC 7121 hauling a full train achieved a record 243 km/h (151 mph) during a test on standard track. The next year, two specially tuned electric locomotives, the CC 7107 and the prototype BB 9004, broke previous speed records, reaching respectively 320 km/h (199 mph) and 331 km/h (206 mph), again on standard track. For the first time, 300 km/h (186 mph) was surpassed, allowing the idea of higher speed services to be developed and further engineering studies commenced. Especially, during the 1955 records, a dangerous hunting oscillation, the swaying of the bogies which leads to dynamic instability and potential derailment was discovered. This problem was solved by yaw dampers which enabled safe running at high speeds today. Research was also made about "current harnessing"[clarification needed] at high-speed by the pantographs, that was solved 20 years later by the Zébulon TGV's prototype.
Breakthrough: The Shinkansen
Japanese research and development
With some 45 million people living in the densely populated Tokyo-to-Osaka corridor, congestion on road and rail became a serious problem after World War II, and the Japanese government began thinking seriously about a new high-speed rail service.
Japan in the 1950s was a populous, resource-limited nation that for security reasons did not want to import petroleum, but needed a way to transport its millions of people in and between cities.
Japanese National Railways (JNR) engineers then began to study the development of a high-speed regular mass transit service. In 1955, they were present at the Lille's Electrotechnology Congress in France, and during a 6-month visit, the head engineer of JNR accompanied the deputy director Marcel Tessier at the DETE (SNCF Electric traction study department). JNR engineers returned to Japan with a number of ideas and technologies they would use on their future trains, including alternating current for rail traction, and international standard gauge.
The first narrow-gauge Japanese high-speed service
In 1957, the engineers at the private Odakyu Electric Railway in Greater Tokyo area launched the Odakyu 3000 series SE EMU. This EMU set a world record for narrow gauge trains at 145 km/h (90 mph), giving the Odakyu engineers confidence they could safely and reliably build even faster trains at standard gauge. The original Japanese railways generally used narrow gauge, but the increased stability offered by widening the rails to standard gauge would make very high-speed rail much simpler, and thus standard gauge was adopted for high-speed service. With the sole exception of Russia all high speed rail lines in the world are still standard gauge, even in countries where the preferred gauge for legacy lines is different.
A new train on a new line
The new service, named Shinkansen (meaning new trunk line) would provide a new alignment, 25% wider standard gauge, continuously welded rails between Tokyo and Osaka using new rolling stock, designed for 250 km/h (155 mph). However, the World Bank, whilst supporting the project, considered the design of the equipment as unproven for that speed, and set the maximum speed to 210 km/h (130 mph).
After initial feasibility tests, the plan was fast-tracked and construction of the first section of the line started on 20 April 1959. In 1963, on the new track, test runs hit a top speed of 256 km/h (159 mph). Five years after the beginning of the construction work, in October 1964, just in time for the Olympic Games, the first modern high-speed rail, the Tōkaidō Shinkansen, was opened between the two cities.
The first Shinkansen trains, the 0 Series Shinkansen, built by Kawasaki Heavy Industries—in English often called "Bullet Trains", after the original Japanese name Dangan Ressha (弾丸列車?)—outclassed the earlier fast trains in commercial service. They traversed the 515 km (320 mi) distance in 3 hours 10 minutes, reaching a top speed of 210 km/h (130 mph) and sustaining an average speed of 162.8 km/h (101.2 mph) with stops at Nagoya and Kyoto.
High-speed rail for the masses
Speed was only a part of the Shinkansen revolution: the Shinkansen offered high-speed rail travel to the masses. The first Bullet trains had 12 cars and later versions had up to 16, and double-deck trains further increased the capacity.
After three years, more than 100 million passengers had used the trains, and the milestone of the first one billion passengers was reached in 1976. In 1972, the line was extended a further 161 km (100 mi), and further construction has resulted in the network expanding to 2,616 km (1,626 mi) as of March 2015, with a further 548 km (341 mi) of extensions currently under construction and due to open in stages between March 2016 and 2035. The cumulative patronage on the entire system since 1964 is over 10 billion, the equivalent of approximately 150% of the world's population, without a single train passenger fatality. (Suicides, passengers falling off the platforms, and industrial accidents have resulted in fatalities).
Since their introduction, Japan's Shinkansen systems have been undergoing constant improvement, not only increasing line speeds. Over a dozen train models have been produced, addressing diverse issues such as tunnel boom noise, vibration, aerodynamic drag, lines with lower patronage ("Mini shinkansen"), earthquake and typhoon safety, braking distance, problems due to snow, and energy consumption (newer trains are twice as energy efficient as the initial ones despite greater speeds).
Revival in Europe and North America
First demonstrations at 200 km/h
In Europe, high-speed rail began during the International Transport Fair in Munich in June 1965, when Dr. Öpfering, the director of Deutsche Bundesbahn (German Federal Railways), performed 347 demonstrations at 200 km/h (124 mph) between Munich and Augsburg by DB Class 103 hauled trains. The same year the Aérotrain, a French hovercraft monorail train prototype, reached 200 km/h (124 mph) within days of operation.
After the successful introduction of the Japanese Shinkansen in 1964, at 210 km/h (130 mph), the German demonstrations up to 200 km/h (124 mph) in 1965, and the proof-of-concept jet-powered Aérotrain, SNCF still ran its fastest trains at only 160 km/h (99 mph).
In 1966, French Infrastructure Minister Edgard Pisani consulted engineers and gave the French National Railways twelve months to raise speeds to 200 km/h (124 mph). The classic line Paris–Toulouse was chosen, and fitted, to support 200 km/h (124 mph) rather than 140 km/h (87 mph). Some improvements were set, notably the signals system, development of on board "in-cab" signalling system, and curve revision.
The next year, in May 1967, a regular service at 200 km/h (124 mph) was inaugurated by the TEE Le Capitole between Paris and Toulouse, with specially adapted SNCF Class BB 9200 locomotives hauling classic UIC cars, and a full red livery.
At the same time, the Aérotrain prototype 02 reached 345 km/h (214 mph) on a half-scale experimental track. In 1969, it achieved 422 km/h (262 mph) on the same track. On 5 March 1974, the full-scale commercial prototype Aérotrain I80HV, jet powered, reached 430 km/h (267 mph).
American Metroliner trains at 200 km/h
In the United States, immediately following the creation of Japan's first high-speed Shinkansen, President Lyndon B. Johnson as part of his Great Society infrastructure building initiatives asked the Congress to devise a way to increase speeds on the railroads. The congress delivered the High Speed Ground Transportation Act of 1965 which passed with overwhelming bi-partisan support and helped to create regular Metroliner service between New York City and Washington, D.C.. The new service was inaugurated in 1969, with top speeds of 200 km/h (125 mph) and averaging 145 km/h (90 mph) along the route.
Europe at 200 km/h
In 1976 the British Rail introduced a high-speed service able to reach 125 mph (201 km/h) using the InterCity 125 diesel-electric train sets under the brand name of High Speed Train (HST). It was the fastest diesel-powered train in regular service and it improved upon its 100 mph (161 km/h) forerunners in speed and acceleration. The train was as a reversible multi-car set having driving power-cars at both ends and a fixed formation of passenger cars between them. Journey times were reduced by an hour for example on the East Coast Main Line, and passenger numbers increased.
The next year, in 1977, Germany finally introduced a new service at 200 km/h (124 mph), on the Munich-Augsburg line. That same year, Italy inaugurated the first European High-Speed line, the Direttissima between Roma and Florence, designed for 250 km/h (155 mph), but used by FS E444 hauled train at 200 km/h (124 mph). This year also saw the abandonment for political reasons of the Aérotrain project, in favour of the TGV.
Evolution in Europe
High-speed rail research
Following the 1955 records, two divisions of the SNCF began to study high-speed services. In 1964, the DETMT (petrol-engine traction studies department of SNCF) planned the use of gas turbines : a diesel-powered railcar is modified with a gas-turbine, and is called "TGV" (Turbotrain Grande Vitesse). It reached 230 km/h (143 mph) in 1967, and served as a basis for the future Turbotrain and the real TGV. In the same time, the new "SNCF Research Department", created in 1966, was studying some projects, especially a project code-named "C03": "Railways possibilities on new infrastructure (tracks)".
In 1969, the "C03 project" was transferred to public administration while a contract with Alsthom was signed for them to build two gas-turbine high-speed train prototypes, named "TGV 001". The prototype consisted of a set of five carriages, plus a power car at each end, both powered by two gas-turbine engines. The sets used Jacobs bogies, which reduce drag and increase safety.
In 1970, the DETMT's Turbotrain began operations on the Paris-Cherbourg line, and operated at 160 km/h (99 mph) despite being designed for usage at 200 km/h (120 mph). It used gas-turbine powered multiple elements and was the basis for future experimentation with TGV services, including shuttle services and regular high rate schedules.
In 1971, the "C03" project, now known as "TGV Sud-Est", was validated by the government, against the Bertin's Aerotrain. Until this date, there was a rivalry between the French Land Settlement Commission (DATAR), supporting the Aérotrain, and the SNCF and its ministry, supporting conventional rail. The "C03 project" included a new High-Speed line between Paris and Lyon, with new multi-engined trains running at 260 km/h (162 mph). At that time, the classic Paris-Lyon line was already congested and a new line was required; this busy corridor, neither too short (where high speeds give limited reductions in end to end times) nor too long (where planes are faster in city center to city center travel time), was the best choice for the new service.
The 1973 oil crisis substantially increases oil prices. In the continuity of the De Gaulle "energy self-sufficiency" and nuclear-energy policy, a ministry decision switched the future TGV from now costly gas-turbine to full electric energy in 1974. An electric railcar named Zébulon was developed for testing at very high speeds, reaching a speed of 306 km/h (190 mph). It was used to develop pantographs capable of withstanding speeds of over 300 km/h (186 mph).
A service above 250 km/h
After intensive tests with the gas-turbine "TGV 001" prototype, and the electric "Zébulon", in 1977, the SNCF placed an order to the group Alstom–Francorail–MTE for 87 TGV Sud-Est trainsets. They used the "TGV 001" concept, with a permanently coupled set of eight cars, sharing Jacobs bogies, and hauled by two electric power-cars, one at each end.
In 1981, the first section of the new Paris–Lyon High-Speed line was inaugurated, with a 260 km/h (162 mph) top speed (then 270 km/h (168 mph) soon after). Being able to use both dedicated high-speed and conventional lines, the TGV offered the ability to join every city in the country at shorter journey times. After the introduction of the TGV on some routes, air traffic on these routes decreased and some cases disappeared. The TGV set a publicised speed records in 1981 at 380 km/h (236 mph), in 1990 at 515 km/h (320 mph), and then in 2007 at 574 km/h (357 mph).
Following the French TGV, in 1991 Germany was the second country in Europe to inaugurate a high-speed rail service, with the launch of the Intercity-Express (ICE) on the new Hannover-Würzburg high-speed railway, operating at a top speed of 280 km/h (174 mph). The German ICE train was similar to the TGV, with dedicated streamlined power cars at both ends, but a variable number of trailers between them. Unlike the TGV, the trailers had two conventional bogies per car, and could be uncoupled, allowing the train to be lengthened or shortened. This introduction was the result of ten years of study with the ICE-V prototype, originally called Intercity Experimental, which broke the world speed record in 1988, reaching 406 km/h (252 mph).
In 1992, just in time for the Barcelona Olympic Games and Seville Expo '92, the Madrid–Seville high-speed rail line opened in Spain with 25 kV AC electrification, and standard gauge, differing from all other Spanish lines which used Iberian gauge. This allowed the AVE rail service to begin operations using Class 100 train sets built by Alstom, directly derived in design from the French TGV trains. The service was very popular and development continued on high-speed rail in Spain.
In 2005, the Spanish Government announced an ambitious plan, (PEIT 2005–2020) envisioning that by 2020, 90 percent of the population would live within 50 km (30 mi) of a station served by AVE. Spain began building the largest HSR network in Europe: as of 2011, five of the new lines have opened (Madrid-Zaragoza-Lleida-Tarragona-Barcelona, Córdoba- Malaga, Madrid-Toledo, Madrid-Segovia-Valladolid, Madrid-Cuenca-Valencia) and another 2,219 km (1,379 mi) were under construction.
Evolution in North America
In 1992, the United States Congress authorized the Amtrak Authorization and Development Act to focus on Amtrak's service improvement on the segment between Boston and New York City of the Northeast Corridor. The primary objectives were to electrify the line north of New Haven, Connecticut and replace the then 30-year-old Metroliners with new trains to achieve shorter travel time.
Amtrak started testing two trains, the Swedish X2000 and the German ICE 1, in the same year along its fully electrified segment between New York City and Washington DC. The officials favored the X2000 as it had a tilting mechanism. However, the Swedish manufacturer never bid on the contract as the burdensome United States railroad regulations required them to heavily modify the train resulting in added weight, among other things. Eventually, a custom-made tilting train derived from TGV, manufactured by Alstom and Bombardier, won the contract and was put into service in December 2000.
The new service was named "Acela Express" and linked Boston, New York City, Philadelphia, Baltimore, and Washington DC. The service did not meet the 3-hour travel time objective, between Boston and New York City. The time was 3 hours and 24 minutes as it partially ran on regular lines, limiting its average speed, with a maximum speed of 241 km/h (150 mph) being reached on a small section of its route through Rhode Island and Massachusetts.
Expansion in East Asia
For four decades from its opening in 1964, the Japanese Shinkansen was the only high-speed rail service outside of Europe. In the 2000s a number of new high-speed rail services started operating in East Asia.
The South Korean KTX
In South Korea, Korea Train Express (KTX) services were launched on 1 April 2004, on the Seoul-Busan corridor, Korea's busiest traffic corridor, between the two largest cities. In 1982, it represented 65.8% of South Korea's population, a number that grew to 73.3% by 1995, along with 70% of freight traffic and 66% of passenger traffic. With both the Gyeongbu Expressway and Korail's Gyeongbu Line congested as of the late 1970s, the government saw the pressing need for another form of transportation.
Construction began on the high-speed line from Seoul to Busan in 1992 with the first commercial service launching in 2004. Top speed for trains in regular service is currently 305 km/h (190 mph), though the infrastructure is designed for 350 km/h (217 mph). The initial rolling stock was based on Alstom's TGV Réseau, and was partly built in Korea. The domestically developed HSR-350x, which achieved 352.4 km/h (219.0 mph) in tests, resulted in a second type of high-speed trains now operated by Korail, the KTX Sancheon. The next generation KTX train, HEMU-430X, achieved 421.4 km/h (262 mph) in 2013, making South Korea the world's fourth country after France, Japan, and China to develop a high-speed train running on conventional rail above 420 km/h (261 mph).
The Chinese CRH
High-speed rail was introduced to China only in the last 20 years but has rapidly developed into the world's most extensive network. As of December 2013, the country had 11,028 km (6,852 mi) of track in operation, accounting for about half of the world's total at the time. In 2013, high-speed trains carried 530 million passenger-trips, about one quarter of all train trips taken in China that year. By the end of 2014, China had 16,000 km of high-speed rail lines, accounting for 60% of the world's total. By the end of 2015, the total has risen to 19,000 km.
State planning for high-speed railway began in the early 1990s, and the country's first high-speed rail line, the Qinhuangdao–Shenyang Passenger Railway, was built in 1999 and opened to commercial operation in 2003. This line could accommodate commercial trains running at up to 200 km/h (124 mph). Planners also considered Germany's Transrapid maglev technology and built the Shanghai Maglev Train, which runs on a 30.5 km (19.0 mi) track linking the city and its international airport. The maglev train service began operating in 2004 with trains reaching a top speed of 431 km/h (268 mph), and remains the fastest high-speed service in the world. Maglev, however, was not adopted nationally and all subsequent expansion features high-speed rail on conventional tracks.
In the 1990s, China's domestic train production industry designed and produced a series of high-speed train prototypes but few were used in commercial operation and none were mass-produced. The Chinese Ministry of Railways (MOR) then arranged for the purchase of foreign high-speed trains from French, German, and Japanese manufacturers along with certain technology transfers and joint ventures with domestic trainmakers. In 2007, the MOR introduced the China Railways High-speed (CRH) service, also known as "Harmony Trains" (和谐号), using trains with foreign technology.
In 2008, high-speed trains began running at a top speed of 350 km/h (217 mph) on the passenger dedicated line between Beijing and Tianjin, which opened during the 2008 Beijing Summer Olympic Games. The following year, trains on the newly opened Wuhan–Guangzhou High-Speed Railway set a world record for average speed over an entire trip, at 312.5 km/h (194.2 mph) over 968 km (601 mi.). In July 2011, however, top train speeds were lowered to 300 km/h (186 mph).
A collision of high-speed trains on 23 July 2011 in eastern China, which killed 40 and injured 195, raised concerns about operational safety. A credit crunch later that year slowed the construction of new lines. But by 2012, the high-speed rail boom had renewed with new lines and new rolling stock by domestic producers that had indigenized foreign technology. On 25 December 2012, China opened the world's longest high-speed rail line, which runs 2,208 km (1,372 mi) from the country's capital Beijing in the north to Shenzhen on the southern coast. The network is still rapidly expanding to create the 4+4 National High Speed Rail Grid by 2015.
Taiwan High Speed Rail's first and only HSR line opened for service on 5 January 2007, using Japanese trains with a top speed of 300 km/h (186 mph). The service traverses 345 kilometres (214 mi) from Taipei Railway Station to Zuoying Station in as little as 96 minutes. Once THSR began operations, almost all passengers switched from airlines flying parallel routes while road traffic was also reduced.
Middle East/Central Asia
In 2009, Turkey inaugurated a high-speed service between Ankara and Eskișehir. This has been followed up by a Ankara - Konya route, and the Eskișehir line has been extended to Istanbul (Asian part).
Uzbekistan opened a slower Afrosiyob service from Tashkent to Samarkand beginning in 2011, which was upgraded in 2013 to an average operational speed of 161 kph and peak speeds over 200 kph.
- Saudi Arabia
Saudi Arabia plans to begin service on a high-speed line with the phased opening from Medina to King Abdullah Economic City in 2015 first, followed up with the rest of the line to Mecca the following year.
In November 2007 by the Moroccan government decided to undertake the construction of a high-speed rail line between the economic capital Casablanca and Tangier, one of the largest harbour city on the Strait of Gibraltar. The line will also serve Rabat the capital and Kenitra The first section of the line, Kenitra–Tangier high-speed rail line should be completed in 2018.
As defined by Europe and UIC, generally the high-speed rail is a set including a high-speed rolling-stock and a dedicated high-speed line.
Japan was the first nation to build a totally new and dedicated lines and network for its Shinkansen. It was followed by France, then Germany, Spain, etc. Most countries today with high-speed rail have dedicated high-speed tracks. Notable exceptions are the USA and Russia. In certain cases, in particular in England in the 1970s for the HST, and in China recently, classic old lines have been upgraded to support new high-speed trains, often up to 200 km/h (124 mph). For unconventional trains, such as Aérotrains and Maglev, the use of viaduct-dedicated tracks is necessary.
Continuous welded rail is generally used to reduce track vibrations and misalignment. Almost all high-speed lines are electrically driven via overhead cables, have in-cab signalling, and use advanced switches using very low entry and frog angles.
Constrictions, such as at-grade crossings, where lines intersect other lines and/or roadways are eliminated. For this reason, Japan and China typically build their high-speed lines on elevated viaducts. High-speed lines avoid tight curves, which reduce speed. Curve radius is typically above 4.5 kilometres (2.8 mi), and for lines supporting 350 km/h (217 mph) speeds, typically at 7 to 9 kilometres (4.3 to 5.6 mi). The lines may rest on traditional sleeper and ballast or on concrete tiles and fences prevent access to the tracks on foot.
Road-rail parallel layout
High-speed lines may be exclusive or open to standard speed trains.
- In France, high-speed lines use standard gauge like the rest of the network, but are used only by passenger TGV, and by the Postal TGV.
- In Germany, high-speed lines are shared between ICE, international high-speed trains, regional trains and freight trains. However, some lines are exclusively used by high speed passenger trains
- In China, high-speed lines at speeds between 200 and 250 km/h (124 and 155 mph) may carry freight or passengers., Lines operating at speeds of 300 km/h (186 mph) are used only by passenger CRH trains.
- In Japan and Spain, high-speed lines use standard gauge as opposed to the rest of their respective networks and are thus dedicated to high-speed trains.
Sharing a line between fast and slow traffic reduces its maximum carrying capacity by a very large factor, by forcing much longer intervals between trains at the two different speeds. Extra tunneling and bridges may be required to construct tracks shared between high-speed trains and freight trains. Freight trains require gentle inclines and high-speed trains require large radius curves, negating the advantage of power to weight ratio for high speed trains which allows them to climb steep inclines and the ability of freight tracks to pass tight curves thanks to slow speed.
Japanese systems are often more expensive than their counterparts, because they run on dedicated elevated guideways, avoid traffic crossings and incorporate disaster monitoring systems. The largest part of Japan's cost is for boring tunnels through mountains, as was also true in Taiwan.
In France, the cost of construction (which was €10 million/km (US$15.1 million/km) for LGV Est) is minimized by adopting steeper grades rather than building tunnels and viaducts. However, in mountainous Switzerland, tunnels are inevitable. Because the lines are dedicated to passengers, gradients of 3.5%, rather than the previous maximum of 1–1.5% for mixed traffic, are used. More expensive land may be required in order to minimize curves. This increases speed, reduces construction costs and lowers operating and maintenance costs. In other countries high-speed rail was built without those economies so that the railway can also support other traffic, such as freight.
Experience has shown however, that running trains of significantly different speeds on one line substantially decreases capacity. As a result, mixed-traffic lines usually reserve daytime for high-speed trains and run freight at night.
This section requires expansion. (July 2013)
Comparison with other modes of transport
While commercial high-speed trains have lower maximum speeds than jet aircraft, they offer shorter total trip times than air travel for short distances. They typically connect city centre rail stations to each other, while air transport connects airports that are typically farther from city centres.
High-speed rail (HSR) is best suited for journeys of 1 to 4½ hours (about 150–900 km or 93–559 mi), for which the train can beat air and car trip time. For trips under about 700 km (430 mi), the process of checking in and going through airport security, as well as traveling to and from the airport, makes the total air journey time equal to or slower than HSR. European authorities treat HSR as competitive with passenger air for HSR trips under 4½ hours.
HSR eliminated most air transport from between Paris-Lyon, Paris-Brussels, Cologne-Frankfurt, Madrid-Barcelona, Nanjing-Wuhan, Chongqing-Chengdu, Tokyo-Nagoya, Tokyo-Sendai and Tokyo-Niigata. China Southern Airlines, China's largest airline, expects the construction of China's high-speed railway network to impact (through increased competition and falling revenues) 25% of its route network in the coming years.
European data indicate that air traffic is more sensitive than road traffic (car and bus) to competition from HSR, at least on journeys of 400 km (249 mi) and more – perhaps because cars and buses are far more flexible than planes, though cost certainly plays a part as well. TGV Sud-Est reduced the travel time Paris–Lyon from almost four to about two hours. Market share rose from 40 to 72%. Air and road market shares shrunk from 31 to 7% and from 29 to 21%, respectively. On the Madrid–Sevilla link, the AVE connection increased share from 16 to 52%; air traffic shrunk from 40 to 13%; road traffic from 44 to 36%, hence the rail market amounted to 80% of combined rail and air traffic. This figure increased to 89% in 2009, according to Spanish rail operator RENFE.
According to Peter Jorritsma, the rail market share s, as compared to planes, can be computed approximately as a function of the travelling time in minutes t by the formula
According to this formula, a journey time of three hours yields 65% market share. However, market shares are also influenced by ticket prices.
Travel by rail is more competitive in areas of higher population density or where gasoline is expensive, because conventional trains are more fuel-efficient than cars when ridership is high, similar to other forms of mass transit. Very few high-speed trains consume diesel or other fossil fuels but the power stations that provide electric trains with power can consume fossil fuels. In Japan and France, with very extensive high-speed rail networks, a large proportion of electricity comes from nuclear power. On the Eurostar, which primarily runs off the French grid, emissions from travelling by train from London to Paris are 90% lower than by flying. Even using electricity generated from coal or oil, high-speed trains are significantly more fuel-efficient per passenger per kilometre traveled than the typical automobile because of economies of scale in generator technology and trains themselves, as well as lower air friction and rolling resistance at the same speed. Rail networks, like highways, require large fixed capital investments and thus require a blend of high density and government investment to be competitive against existing capital infrastructure.
Automobiles and buses
High-speed rail can accommodate more passengers at far higher speeds than automobiles. Generally, the longer the journey, the better the time advantage of rail over road if going to the same destination. However, high-speed rail can be competitive with cars on shorter distances, 0–150 kilometres (0–90 mi), for example for commuting, given road congestion or expensive parking fees.
Moreover, typical passenger rail carries 2.83 times as many passengers per hour per metre width as a road. A typical capacity is the Eurostar, which provides capacity for 12 trains per hour and 800 passengers per train, totaling 9,600 passengers per hour in each direction. By contrast, the Highway Capacity Manual gives a maximum capacity of 2,250 passenger cars per hour per lane, excluding other vehicles, assuming an average vehicle occupancy of 1.57 people. A standard twin track railway has a typical capacity 13% greater than a 6-lane highway (3 lanes each way), while requiring only 40% of the land (1.0/3.0 versus 2.5/7.5 hectares per kilometre of direct/indirect land consumption). The Tokaido Shinkansen line in Japan, has a much higher ratio (with as many as 20,000 passengers per hour per direction). Similarly commuter roads tend to carry fewer than 1.57 persons per vehicle (Washington State Department of Transportation, for instance, uses 1.2 persons per vehicle) during commute times.
Although air transit moves at higher speeds, its total time to destination can be increased by check-in, baggage handling, security and boarding. These procedures also add cost to air travel. Trains are preferred in shorter, mid range distances since rail stations are typically closer to urban centers than airports. Likewise, air travel needs longer distances to have a speed advantage after accounting for both processing time and travel to the airport.
Rail travel also requires less weather dependency than air travel. A well designed and operated rail system can only be affected by severe weather conditions, such as heavy snow, heavy fog, and major storm. Flights however, generally face cancellations or delays under less severe conditions. High-speed trains also have comfort advantages, since train passengers are allowed to move freely about the train at any point in the journey.[non-primary source needed] The seats are also less subject to weight restrictions than on planes, and as such may have more padding and legroom. Technology advances such as continuously welded rail have minimized the vibration found on slower railways, while air travel remains affected by turbulence when adverse wind conditions arise. Trains can also accommodate intermediate stops at lower time and energetic costs than planes, though this applies less to HSR than to the slower conventional trains.
On particular busy air-routes - those that HSR has historically been most successful on - trains are also less prone to delays due to congested airports. A train that is late by a couple of minutes will not have to wait for another slot to open up, unlike airplanes at congested airports. Furthermore, many airlines see short haul flights as increasingly uneconomic and in some countries airlines rely on High speed rail instead of short haul flights for connecting services.
Parts of this article (those related to 2015 rail crash in France) are outdated.(November 2015)
HSR is much simpler to control due to its predictable course. High-speed rail systems reduce (but do not eliminate) collisions with automobiles or people, by using non-grade level track and eliminating grade-level crossings. To date the only two deadly accidents involving a high speed train on high speed tracks were the 1998 Eschede train disaster and the 2011 Wenzhou train collision (in which speed was not a factor).
High-speed rail is one of the safest modes of transportation. The first high-speed rail network, the Japanese Shinkansen has not had any fatal accidents involving passengers since it began operating in 1964.
Notable major accidents involving high-speed trains include the following.
The 1998 Eschede accident
In 1998, after over thirty years of high-speed rail operations worldwide without fatal accidents, the Eschede accident occurred in Germany: a poorly designed ICE 1 wheel broke at 200 km/h (124 mph) near Eschede, resulting in the derailment and destruction of almost the entire full set of 16 cars and the subsequent death toll of 101 people.
The 2011 Wenzhou accident
On 23 July 2011, 13 years after the Eschede train accident, a Chinese CRH2 traveling at 100 km/h (62 mph) collided with a CRH1 which was stopped on a viaduct in the suburbs of Wenzhou, Zhejiang province, China. The two trains derailed, and four cars fell off the viaduct. 40 people were killed, at least 192 were injured, 12 of which were severe injuries.
The disaster led to a number of changes in management and exploitation of high-speed rail in China. Despite the fact that high speed was not a factor in the accident, one of the major changes was the lowering by 50 km/h (31 mph) of all maximum speeds in China HST, 350 km/h (217 mph) becoming 300, 250 km/h (155 mph) becoming 200, and 200 km/h (124 mph) becoming 160.
The 2013 Santiago de Compostela accident
In July 2013, a high-speed train in Spain attempted to round a curve which had a speed limit of 80 km/h (50 mph) at 190 km/h (120 mph), leading to 78 fatalities. Normally high-speed rail has automatic speed limiting restrictions, but this track section is a conventional section and in this case the automatic speed limit was said to be disabled by the driver several kilometers before the station. A few days later, the train worker's union claimed that the speed limiter didn't work properly because of lack of proper funding, acknowledging the budget cuts made by the current government. Two days after the accident, the driver was provisionally charged with homicide by negligence. This is the first accident that occurred with a Spanish high-speed train, but it occurred in a section that was not high speed.
The 2015 Eckwersheim accident
On 14 November 2015, a specialized TGV EuroDuplex was performing commissioning tests on the unopened second phase of the LGV Est high-speed line, when it entered a curve, overturned, and struck the parapet of a bridge over the Marne–Rhine Canal. The rear power car came to a rest in the canal, while the remainder of the train came to a rest in the grassy median between the northern and southern tracks. Approximately 50 people were on board, consisting of SNCF technicians and reportedly some unauthorized guests. 11 were killed and 37 were injured. The train was performing tests at 10% above the planned speed limit for the line and should have slowed from 352 km/h (219 mph) to 176 kilometres per hour (109 mph) before entering the curve. Officials have indicated that excessive speed may have caused the accident.
- Please refer to articles for respective systems.
Cumulative by system
HSR vs Commercial Aviation Comparison
|Year||Annual world HSR||Annual world airlines |
- Only systems with 200 km/h (124 mph) service speeds or higher are considered.
There are several definitions of "maximum speed":
- The maximum speed at which a train is allowed to run by law or policy in daily service (MOR)
- The maximum speed at which an unmodified train is proved to be capable of running
- The maximum speed at which specially modified train is proved to be capable of running
Absolute speed record
Since the 1955 record, France has nearly continuously held the absolute world speed record. The latest record is held by a SNCF TGV POS trainset, which reached 574.8 km/h (357.2 mph) in 2007, on the newly constructed LGV Est high-speed line. This run was for proof of concept and engineering, not to test normal passenger service.
Unlike the conventional records, the TGV records have been made by heavily tuned trains, modified from commercial service trains.
Maximum speed in service
The fastest operating conventional trains are the French TGV POS, German ICE 3, and Japanese E5 and E6 Series Shinkansen with a maximum commercial speed of 320 km/h (199 mph), the former two on some French high-speed lines, and the latter on a part of Tohoku Shinkansen line.
Since July 2011, in China, the maximum speed is officially 300 km/h (186 mph), but a 10 km/h (6 mph) tolerance is accepted, and trains often reach 310 km/h (193 mph). Before that, from August 2008 to July 2011, China Railway High-speed trains held the highest commercial operating speed record with 350 km/h (217 mph) on some lines (Beijing–Tianjin Intercity Railway, Wuhan–Guangzhou High-Speed Railway). Due to high costs and safety concerns the top speeds in China were reduced to 300 km/h (186 mph) on 1 July 2011.
The Shanghai Maglev Train reaches 431 km/h (268 mph) during its daily service on its 30.5 km (19.0 mi) dedicated line, holding the speed record for commercial train service. [clarification needed]
The China Railways G/1276/7-G1278/5 Harbin-Wuhan train (2446 km, 14 ½ hours), which began service on December 10, 2014, became the longest high-speed rail service in the world. It overtook the G1202 Harbin-Shanghai (2421 km, 12 hours), which had set the previous record on December 28, 2012.
The early target areas, identified by France, Japan, Spain, and the U.S., were between pairs of large cities. In France, this was Paris–Lyon, in Japan, Tokyo–Osaka, in Spain, Madrid–Seville (then Barcelona). In European countries, South Korea and Japan, dense networks of city subways and railways provide connections with high-speed rail lines.
China has the largest network of high-speed railways in the world and in 2013 it encompassed 10,000 km of high-speed rail. According to Railway Gazette, the trains between Shijiazhuang and Zhengzhou East have the fastest average operating speed in the world at 283.7 km/h (176.3 mph) as of August 2013[update].
Taiwan High Speed Rail is a high-speed rail system that has only one line. It is approximately 345 km (214 mi) long, along the west coast of Taiwan from the national capital Taipei to the southern city of Kaohsiung. The construction was managed by Taiwan High Speed Rail Corporation and the total cost of the project was US$18 billion. The private company operates the line fully, and the system is based primarily on Japan's Shinkansen technology.
Eight initial stations were built during the construction of the High Speed Rail system: Taipei, Banqiao, Taoyuan, Hsinchu, Taichung, Chiayi, Tainan, and Kaohsiung.
Since its opening in 2004, KTX has transferred over 360 million passengers until April 2013, accounting to one South Korean using it seven times. For any transportation involving travel above 300 km (186 mi), the KTX secured a market share of 57% over other modes of transport, which is by far the largest.
Other target areas include freight lines, such as the Trans-Siberian Railway in Russia, which would allow 3 day Far East to Europe service for freight, potentially fitting in between the months by ship and hours by air.
The United States has domestic definitions for high-speed rail varying between jurisdictions.
- The United States Code defines high-speed rail as services "reasonably expected to reach sustained speeds of more than 125 mph (201 km/h)",
- The Federal Railroad Administration uses a definition of top speeds at 110 mph (177 km/h) and above.
- The Congressional Research Service uses the term "higher speed rail" for speeds up to 150 mph (241 km/h) and "very high speed rail" for the rail on dedicated tracks with speeds over 150 mph (241 km/h).
As of 2013, the Northeast corridor (Acela Express) is the only high-speed rail line in operation in the United States linking Boston, New York City, Philadelphia and Washington, D.C. The California High-Speed Rail project is planned to have its first operating segment between Fresno and Bakersfield in 2021. No other segment is expected to be in service before 2025.
Market segmentation has principally focused on the business travel market. The French original focus on business travelers is reflected by the early design of the TGV trains. Pleasure travel was a secondary market; now many of the French extensions connect with vacation beaches on the Atlantic and Mediterranean, as well as major amusement parks and also the ski resorts in France and Switzerland. Friday evenings are the peak time for TGVs (train à grande vitesse). The system lowered prices on long distance travel to compete more effectively with air services, and as a result some cities within an hour of Paris by TGV have become commuter communities, increasing the market while restructuring land use.
On the Paris – Lyon service, the number of passengers grew sufficiently to justify the introduction of double-decker coaches. Later high-speed rail lines, such as the LGV Atlantique, the LGV Est, and most high-speed lines in France, were designed as feeder routes branching into conventional rail lines, serving a larger number of medium-sized cities.
Germany's first high-speed lines ran north-south, for historical reasons, and later developed east-west after German unification.
During the 1920s and '30s, Italy was one of the first countries to develop the technology for high-speed rail. The country constructed the Direttissime railways connecting major cities on dedicated electrified high-speed track (although not as high-speed as would nowadays be called high-speed rail) and developed the fast ETR 200 trainset. After the Second World War and the fall of the fascist regime, interest in high-speed rail dwindled, with the successive governments considering it too costly and developing the tilting Pendolino, to run at medium-high speed (up to 250 km/h (160 mph)) on conventional lines, instead. The only exception was the Direttissima between Florence and Rome, but it was not conceived to be part of a high-speed line on large scale.
A true dedicated high-speed rail network was developed during the 80s and the 1990s, and in 2010 1,000 km (621 mi) of high-speed rail were fully operational. Frecciarossa services are operated with ETR 500 non-tilting trains at 25kVAC, 50 Hz power. The operational speed of the service is of 300 km/h (186 mph). ETR1000 trainsets are currently under construction and were developed by the consortium formed by AnsaldoBreda and Bombardier. Based on the Bombardier Zefiro trainset, it will operate up to 360 km/h (224 mph) on the existing high-speed rail system.
Over 100 million passengers used the Frecciarossa from the service introduction and the first months of 2012. Italian high-speed services are recording profits, encouraging Trenitalia to plan major investments[which?] and to cede a large part of local and regional services to other operators ( like Nuovo Trasporto Viaggiatori and Trenord) and focusing efforts on high-speed and long-distance services (also through the medium-speed Frecciargento, Frecciabianca and InterCity services, which run on conventional lines).
Norway's fastest trains have (2015) a commercial top speed of 210 km/h and the FLIRT trains may attain 200 km/h. A velocity of 210 km/h is permitted on the 42 km Gardermobanen which links the Gardermoen airport to Oslo and a part of the main line northwards to Trondheim.
Some parts of the trunk railways around Oslo are renewed and built for 250 km/h:
- Follobanen southwards from Oslo, a 22 km long line Oslo–Ski on Østfoldbanen, mainly in tunnel, planned ready in 2021.
- The Holm–Holmestrand–Nykirke part of Vestfoldbanen (west to southwest of Oslo).
- The Farriseidet project, 14.3 km beteween Larvik and Porsgrunn on Vestfoldbanen, 12.5 km in tunnel.
Spain has built an extensive high-speed rail network, 3,100 km (1,926 mi) (2013), the largest in Europe. It uses standard gauge in opposite to the Iberian gauge used in the most of the national railway network, meaning that the high-speed railways are separated and has almost only high-speed trains, no local trains and no freight. This network is from 2013 connected to the French network, with direct trains Paris-Barcelona.
High-speed north–south freight lines in Switzerland are under construction, avoiding slow mountainous truck traffic, and lowering labour costs. The new lines, in particular the Gotthard Base Tunnel, are built for 250 km/h (155 mph). But the short high-speed parts and the mix with freight will lower the average speeds. The limited size of the country gives fairly short domestic travel times anyway.
The Turkish State Railways started building high-speed rail lines in 2003. The first section of the line, between Ankara and Eskișehir, was inaugurated on March 13, 2009. It is a part of the 533 km (331 mi) Istanbul to Ankara high-speed rail line. A subsidiary of Turkish State Railways, Yüksek Hızlı Tren is the sole commercial operator of high-speed trains in Turkey.
The construction of three separate high-speed lines from Ankara to Istanbul, Konya and Sivas, as well as taking an Ankara–İzmir line to the launch stage, form part of the Turkish Ministry of Transport's strategic aims and targets. Turkey plans to construct a network of high-speed lines in the early part of the 21st century, targeting a 1,500 km (932 mi) network of high-speed lines by 2013 and a 10,000 km (6,214 mi) network by the year 2023.
The UK's fastest high-speed line (HS-1) connects London St Pancras with Brussels and Paris through the Channel Tunnel. It is the only high-speed line in Britain with an operating speed of more than 125 mph (201 km/h).
The Great Western Main Line, South Wales Main Line, West Coast Main Line, Midland Main Line, Cross Country Route and East Coast Main Line all have maximum speed limits of 125 mph (201 km/h) on all or part of the line. Attempts to increase speeds to 140 mph (225 km/h) on both the West Coast Main Line and East Coast Main Line have failed because the trains on those lines do not have cab signaling, which is a legal requirement in the UK for trains to be permitted to operate at speeds greater than 125 mph (201 km/h) due to the impracticality of observing lineside signals at such speeds.
- Ground effect train
- Land speed record for rail vehicles
- List of high-speed railway lines
- List of high-speed trains
- Magnetic levitation train
- Planned high-speed rail by country
- Passenger rail terminology
- "General Definitions of Highspeed". International Union of Railways (UIC). Retrieved 20 November 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- (Chinese) 高铁拉动中国经济快步奔跑 2015-01-03
- "General definitions of highspeed". International Union of Railways. Retrieved 13 May 2009.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Official Guide of the Railways, 1910: The Official Guide of the Railways and Steam Navigation Lines of the United States, Puerto Rico, Canada, Mexico, and Cuba, Rand McNally & Company Publishing, 1910, http://cprr.org/Museum/Books/I_ACCEPT_the_User_Agreement/Official_Rail_Guide_1910.pdf
- Sith Sastrasinh, "Electrical Train Marienfelde–Zossen in 1901", 21 January 2000, WorldRailFans. Accessed 23 January 2013.
- Krettek, s. 47
- Middleton, s. 27
- Middleton, p. 68
- Middleton, p. 60
- Middleton, p. 72
- Middleton, p. 109
- Geschichte und Zukunft des Verkehrs.: Verkehrskonzepte von der Frόhen ... 1997. ISBN 9783593357669. Retrieved 2013-03-26.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Eric H. Bowen. "The Pioneer Zephyr - September, 1938 - Streamliner Schedules". Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Eric H. Bowen. "The Twin Zephyrs - September, 1938 - Streamliner Schedules". Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Low Slung Train Travels Fast, p. 70, at Google Books Popular Science, February 1945, p. 70
- D'où viens tu TGV? (in French), by Jean François Picard and Alain Beltran
- Hood, Christopher P. (2007). Shinkansen – From Bullet Train to Symbol of Modern Japan. Routledge, London. pp. 18–43. ISBN 978-0-415-32052-8.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Kanagawa Prefecture:県央・湘南の環境と共生する都市づくりＮＥＷＳ NO.11」新幹線豆知識クイズの解説". Pref.kanagawa.jp. Retrieved 17 October 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Outline History and Overview of the Tokaido Shinkansen". Central Japan Railway Company. March 2010. Retrieved 2 May 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Tohoku Shinkansen". East Japan Railway Company. March 2011. Retrieved 2 May 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "2010 Fact Sheets" (PDF). JR East. 30 July 2010. Retrieved 2 May 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Hood, Christopher P (2006). Shinkansen: From bullet train to symbol of modern Japan. p. 214. ISBN 0415444098.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "New maglev Shinkansen to run underground for 86% of initial route". AJW by The Asahi Shimbun. Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Remarks at the Signing of the High-Speed Ground Transportation Act. September 30, 1965, http://www.presidency.ucsb.edu/ws/?pid=27281
- The Metroliner was able to travel from New York to Washington in just 2.5 hours because it did not make any intermediate stops, Metroliner Timetable, Penn Central, October 26, 1969, http://www.streamlinerschedules.com/concourse/track3/metroliner197002.html this travel time beats the Contemporary (2015) Acela on the same route, though the latter makes intermediate stops
-  Archived 26 June 2010 at the Wayback Machine
- [dead link]
- "Amtrak's Management of Northeast Corridor Improvements Demonstrates Need for Applying Best Practices (GAO-04-94)" (PDF). Report to the Chairman, Committee on Commerce, Science, and Transportation, U.S. Senate. United States General Accounting Office. February 2004. Retrieved 26 August 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Dao, James (24 April 2005). "Acela, Built to Be Rail's Savior, Bedevils Amtrak at Every Turn". The New York Times. Retrieved 26 August 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Cho & Chung 2008, p. 11.
- (Chinese) "中国高铁总里程达11028公里占世界一半" 新华网 2014-03-05
- (Chinese) 世界高速铁路发展方兴未艾 中国跃居首位 2014-03-05
- (Chinese) 高铁拉动中国经济快步奔跑 2016-01-03
- "World's Longest Fast Train Line Opens in China". Associated Press. Retrieved 26 December 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Beijing - Guangzhou high speed line completed". Railway Gazette International. Retrieved 31 December 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "World's Longest Fast Train Line Opens in China". Associated Press. Retrieved 31 December 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "China's operating high-speed railway exceeds 7,000 km". xinhuanet.com. 2012-11-27. Retrieved 2012-11-27.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Chen, Melody (4 September 2008). "Romance of rail jeopardizes domestic air routes". Taiwan Journal. Retrieved 11 October 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Taiwan's High-speed Rail: It's Been a Rapid Learning Curve". China Knowledge@Wharton. Wharton School of the University of Pennsylvania. 26 September 2007. Retrieved 11 October 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "High-speed train to make 8 trips daily between Ankara, Eskișehir". TodaysZaman. Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Bridge near KAIA to be removed in 2 months". Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Interstate Rail Proposal". J.H. Crawford. Retrieved 17 October 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Jamil Anderlini (5 April 2010). "China on track to be world's biggest network". Financial Times. Retrieved 12 April 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "European high-speed rail – An easy way to connect" (PDF). Luxembourg: Publications Office of the European Union. 2010. Retrieved 18 April 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "High-speed rail cuts into airlines' success". China Daily. 2 April 2011. Retrieved 17 October 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "China Southern Says Railways to Hurt 25% of Routes (Update1)". Bloomberg. 28 October 2009. Retrieved 17 October 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Peter Jorritsma: Substitution Opportunities of High Speed Train for Air Transport, http://www.aerlines.nl/issue_43/43_Jorritsma_AiRail_Substitution.pdf, p. 3
- Spain’s High-Speed Rail Offers Guideposts for U.S., The New York Times, 29 May 2009.
- Peter Jorritsma: Substitution Opportunities of High Speed Train for Air Transport, http://www.aerlines.nl/issue_43/43_Jorritsma_AiRail_Substitution.pdf, p. 4
- The Times, Friday, 6 January 2006, p54. France will run trains free from fossil fuel, says Chirac.
- "Cut your CO2 emissions by taking the train, by up to 90%..." Seat61. Retrieved 28 August 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Prashant Vaze. The Economical Environmentalist. Earthscan. p. 298.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Fact #257: 3 March 2003 – Vehicle Occupancy by Type of Vehicle". US Department of Energy, Energy Efficiency and Renewable Energy.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
-  from Smith, Oliver as of 10 May 2014
-  from  as of 10 May 2014
-  from Amtrak as of 10 May 2014
- Examples of this include SNCF who codeshares with Air France and Lufthansa's AIRail in cooperation with DB
- "ICE train slashed open by garbage truck in Germany". Bild.de. Retrieved 28 August 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Fatal high-speed train kills 12 young pedestrians near beach in Barcelona". Bild.de. Retrieved 28 August 2010.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Yonah Freemark, Special to CNN (26 July 2013). "Opinion: Why high-speed rail is safe, smart - CNN.com". CNN. Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Special Feature Eschede, Germany ICE High Speed Train Disaster". Danger Ahead. Retrieved December 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Derailment at Eschede". Derailment at Eschede. Retrieved December 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Death toll from China's train crash rises to 39, including two Americans". Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- chinadaily : Decision to slow trains met with mixed response
- chinadaily : More high-speed trains slow down to improve safety
- "American woman among 80 killed in Spain train crash; driver detained". NBC News. Archived from the original on 21 October 2014. Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "El accidente atemoriza a las empresas que pujan por el AVE de Brasil". 02B. Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Test train catastrophe on LGV Est". Railway Gazette. 16 November 2015. Retrieved 16 November 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Japan's maglev train breaks world speed record with 600km/h test run". The Guardian. United Kingdom: Guardian News and Media Limited. 21 April 2015. Retrieved 21 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "320-kph Hayabusa matches world speed record". The Japan Times. Japan: The Japan Times Ltd. 17 March 2013. Retrieved 11 September 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "World's longest high-speed train to decelerate a bit". People's Daily Online. 15 April 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Top ten fastest trains in the world" railway-technology.com 29 August 2013
- (Chinese) "哈尔滨至武汉高铁今日开通 创世界最长高铁记录" 中新网 2014-12-10
- China's high-speed railways exceed 10,000 km-Eastday
- Rabinovitch, Simon (27 October 2011). "China's high-speed rail plans falter". Financial Times. Retrieved 27 November 2012.
The country’s first bullet train only started running in 2007 but within four years China had developed the world’s largest high-speed network.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "World Speed Survey 2013: China sprints out in front". Railway Gazette International. Retrieved 11 September 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Shinkansen (Bullet Train), Japan Railways Group. Archived 18 December 2009 at the Wayback Machine
- AMTRAK, Off Track, Triplepoint. Boston University.
- "Taiwan High Speed Rail Corporation". Retrieved 17 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- KTX 개통 9년…이용객 4억명 돌파 눈앞. Hankyung.com. Retrieved on 2013-07-12.
- "US Code Title 49 § 26105 –Definitions". US Code Title 49. 1 February 2010. Retrieved 27 May 2011.
reasonably expected to reach sustained speeds of more than 125 mi (201 km) per hour<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "High-Speed Rail Strategic Plan". U.S. Department of Transportation. April 1, 2009. Retrieved 2013-06-28.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Development of High Speed Rail in the United States: Issues and Recent Events" (PDF). Congressional Research Service. Retrieved 10 October 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "High Speed lines in the World" (PDF). UIC High Speed Department. 1 July 2013. Retrieved 21 July 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>[dead link]
- Metzler, 1992
- Levinson, D.
- "Il prototipo dell'ETR1000 di Bombardier/AnsaldoBreda sarà presentato ad agosto". Cityrailways.it. Archived from the original on 27 June 2012. Retrieved 25 June 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Alta Velocità: tagliato il traguardo dei 100 milioni di viaggiatori". ilsussidiario.net. Retrieved 25 June 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Trenitalia: Dal 2013 a rischio il trasporto locale". SkyTG24. Retrieved 25 June 2012.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Strategic Aims and Targets www.mt.gov.tr
- TCDD annual report 2008 www.tcdd.gov.tr Archived 21 October 2014 at the Wayback Machine
- Cornolò, Giovanni (1990). Una leggenda che corre: breve storia dell'elettrotreno e dei suoi primati; ETR.200 – ETR.220 – ETR 240. Salò: ETR. ISBN 88-85068-23-5.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- de Rus, Gines (2011). "vol 2, issue 1". In Journal of Benefit-Cost Analysis. The BCA of HSR: Should the Government Invest in High Speed Rail Infrastructure?. Berkeley Press.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Ottmar Krettek 1975: Rollen Schweben Gleiten – Unkonventionelle Verkehrsmittel. Alba Buchverlag, Düsseldorf. ISBN 3-87094-033-6.
- William D. Middleton: The interurban era, Kalmbach Publishing Co, fourth printing 1968; http://www.archive.org/stream/interurbanera00midd/interurbanera00midd_djvu.txt
|Wikimedia Commons has media related to High speed trains.|
|Wikivoyage has a travel guide for High-speed rail.|