Hoan Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Hoan Bridge
Hoan Bridge.jpg
The Hoan Bridge
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Carries 6 lanes of I-794
Crosses Milwaukee River
Locale Milwaukee, Wisconsin, U.S.
Official name Daniel Hoan Memorial Bridge
Maintained by Wisconsin Department of Transportation (WisDOT)
Characteristics
Design Tied arch bridge
Total length 3,057.8 m (1.9 mi)[1]
Width 15.8 m (51.8 ft)[2]
Clearance below 36.6 m (120.1 ft)[2]
History
Construction begin 1970
Opened 1977
Statistics
Daily traffic 19230[2]
File:HoanBridge12042005.jpg
The underside of the bridge

The Daniel Hoan Memorial Bridge is a tied arch bridge that connects Interstate 794 in downtown Milwaukee, Wisconsin, to the Lake Freeway across the Milwaukee River inlet. Originally called the Harbor Bridge, it was renamed after Daniel Hoan, a Socialist, and one of the longest serving mayors of Milwaukee.

It was designed by the firm Howard, Needles, Tammen & Bergendoff and in 1975 won the American Institute of Steel Construction (AISC) Long Span Bridge Award. Although construction on the bridge lasted briefly from 1970 until 1972, it did not open to traffic until 1977 due to public backlash against the planned Milwaukee County freeway system. This halted completion of the connecting roadways and led to the Hoan Bridge being known as "The Bridge to Nowhere."

Its unfinished state was used as the site of the car chase scene in the movie The Blues Brothers. Eventually, the bridge connections were completed in 1998, when the Lake Parkway (Wisconsin Highway 794) opened between the bridge's southernmost exit, connecting the bridge between the Bay View neighborhood and downtown Milwaukee's southeastern tip.

The Hoan Bridge was temporarily closed on December 13, 2000, after two of the three support beams of the lakefront span failed, causing the north-bound lanes to buckle and sag by several feet and leaving the span in a near collapsed state. No motorists were injured when the bridge failed. On December 28, 2000, engineers used explosives to remove the damaged section. The damaged span was restricted to one lane in each direction for eight months while it was reconstructed, and the remainder of the bridge underwent extensive rehabilitation and retrofitting. Two lanes in each direction were reintroduced on October 10, 2001, and the bridge was fully reopened the following month.[3] According to the Milwaukee Journal-Sentinel, at the time of its failure, the six lanes of the bridge had carried an average of only 36,590 cars per day.[4] A total of $16 million was spent to demolish and replace the damaged section and retrofit the remainder of the bridge.[5] Experts believe that improperly designed welds between the lower lateral bracing and floorbeams along with a period of extreme cold and snow led to the partial collapse of the Hoan Bridge.[6]

A complete rehabilitation of the bridge has been approved in conjunction with related construction on I-794 and its interchange. The rehabilitation plan includes removal and replacement of the bridge deck, other structural adjustments, and the cleaning and repainting of the bridge's steel. The improvements are expected to extend the life span of the bridge by 40 to 50 years.[7]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. http://projects.511wi.gov/web/hoan-bridge-project/overview#

External links