Human-powered hydrofoil

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Starting an AquaSkipper on the river Spree in Berlin

A human-powered hydrofoil is a small hydrofoil watercraft propelled entirely by the muscle power of its operator(s).[1] Hydrofoils are the fastest water-based vehicles propelled solely by human power. They can reach speeds of up to 34 km/h (21 mph; 18 kn),[1][2][3] easily exceeding the world records set by competitive rowing which stand at about 20 km/h (12 mph; 11 kn). This speed advantage is achieved since hydrofoils lack a submerged body to provide buoyancy, greatly reducing the drag force.[1]

for example: https://www.youtube.com/watch?v=k8Yv248B2-Y

Propulsion

Means of propulsion include screw propellers, as in hydrocycles, aircraft propellers, as in the Decavitator, paddles, as in a Flyak, and flapping wings, as detailed below.

Flapping wing propulsion

Flapping wing propulsion devices are hydrofoils that generate propulsion by forcing a foil to move up and down in the water. The forward motion of the foil then generates lift as in other hydrofoils. A common design consists of a large foil at the stern that is used both for propulsion and keeping the passenger above the water, connected to a smaller foil at the bow used for steering and longitudinal stability. Riders operate the vehicle by bouncing up and down on a small platform at the stern, whilst holding onto a steering column.[4][5] It is started and landed from the shore, or preferably from a dock, and requires a bit of experience. When moving too slowly, it will sink, and the range of possible speeds is 9–30 km/h (5.6–18.6 mph; 4.9–16.2 kn)[5]

Several variations on the design have been developed:

  • The Wasserläufer was a forerunner of the design developed in Germany during the 1950s.[6]
  • The FlyingFish was developed by Allan Abbott and Alec Brooks in 1984 .[7]
  • The Pogofoil, with pontoons for flotation, was developed in the US in 1989.[8]
  • The Trampofoil was developed in Sweden in 1998.[9]
  • The AquaSkipper was developed the US in 2003.[10][11]
  • The Pumpabike was developed in South Africa in 2004.[5][12]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.

External links