Interstate 270 (Maryland)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Interstate 270 marker

Interstate 270
Dwight D. Eisenhower Memorial Highway
Washington National Pike
Route information
Auxiliary route of I-70
Maintained by MDSHA
Length: 34.70 mi[2] (55.84 km)
32.90 mi (52.95 km) mainline[1]
2.10 mi (3.38 km) spur[1]
Existed: 1975 – present
Major junctions
South end: I-495 / MD 355 north of Bethesda
  I-270 Spur north of Bethesda
I-370 in Rockville
North end: I-70 / US 40 near Frederick
Location
Counties: Montgomery, Frederick
Highway system
x20px MD 269 MD 270 x20px

Interstate 270 (abbreviated I-270) is a 34.70-mile (55.84 km) auxiliary Interstate Highway in the U.S. state of Maryland that travels between I-495 (the Capital Beltway) just north of Bethesda, Montgomery County and I-70 in the city of Frederick in Frederick County. It consists of the 32.60-mile (52.46 km) mainline as well as a 2.10-mile (3.38 km) spur that provides access to and from southbound I-495. I-270 is known as the Washington National Pike, and makes up the easternmost stretch of the Dwight D. Eisenhower Memorial Highway.[3] Most of the southern part of the route in Montgomery County passes through suburban areas around Rockville and Gaithersburg that are home to many biotech firms. This portion of I-270 is up to twelve lanes wide and consists of a local-express lane configuration as well as high-occupancy vehicle lanes that are in operation during peak travel times. North of the Gaithersburg area, the road continues through the northern part of Montgomery County, passing Germantown and Clarksburg as a six- to eight-lane highway with a HOV lane in the northbound direction only. North of here, I-270 continues through rural areas into Frederick County and toward the city of Frederick as a four-lane freeway.

The freeway was built between 1953 and 1960 as the Washington National Pike between Bethesda and Frederick and carried U.S. Route 240 (US 240), which was rerouted off what is now Maryland Route 355 (MD 355) between these two points. With the creation of the Interstate Highway System a few years later, the road was designated as I-70S along with US 240. There were plans to extend I-70S to I-95 in Washington, D.C. on the North Central Freeway from the Capital Beltway; however, they were cancelled in the 1970s due to opposition from residents in the freeway’s path. The concurrent US 240 designation was removed in 1972 and I-70S became I-270 in 1975. Increasing traffic levels led to a $200 million widening of the road in Montgomery County to its current configuration and further increased traffic. Many improvements are slated for I-270, including the construction of three new interchanges and the widening of the route between Shady Grove Road and Frederick that would add high-occupancy vehicles lanes and high-occupancy toll lanes.

Route description

Montgomery County

I-270 near the exit for Montrose Road in June 2007.
I-270 northbound at MD 118 interchange in Germantown in January 2008.
I-270 northbound in Germantown in September 2013.

I-270 heads northwest from an interchange with I-495 (Capital Beltway) and MD 355 (Rockville Pike) in suburban Bethesda, Montgomery County as a six-lane freeway.[1][4] The left lane on each side is used as a high-occupancy vehicle lane (HOV lane) in the northbound direction between 3:30 and 6:30 PM weekdays and in the southbound direction between 6:00 and 9:00 AM weekdays.[1] At the southern terminus, I-270 only has access to and from the eastbound direction of I-495.[4] The road turns west and comes to an interchange with MD 187 (Old Georgetown Road). From there, I-270 continues west as a ten-lane freeway and merges with I-270 Spur, which provides access to and from southbound I-495. Past this interchange, I-270 continues north as a twelve-lane freeway with an HOV lane and five travel lanes in each direction. The route passes through wooded suburban areas, where prior to the cloverleaf interchange with Montrose Road (MD 927), I-270 takes on a local-express lane configuration with the outer two lanes serving as local lanes and the inner three lanes and the HOV lane serving as express lanes.[1][4] Past Montrose Road, I-270 continues north into the Rockville area, turning northwest before it comes to a single-point urban interchange with MD 189 (Falls Road), where the highway sees 253,620 vehicles daily.[1][4] The road continues to a modified cloverleaf interchange with MD 28 (Montgomery Avenue).[4] Past MD 28, the freeway passes numerous business parks and some wooded areas before coming to an interchange with Shady Grove Road.[1][4]

Past this interchange, I-270 leaves Rockville and heads into Gaithersburg, where it intersects I-370, a road that provides access to a park and ride lot at the Shady Grove Metro station and MD 200 (the Intercounty Connector), which heads east to I-95 in Laurel.[1][4] Past I-370, the local lane configuration ends in the southbound direction, which now has an HOV lane and four travel lanes while the northbound direction still has an HOV lane, three express lanes, and two local lanes.[4] I-270 continues past more suburban development before coming to a northbound exit and southbound entrance with MD 117 (West Diamond Avenue).[1][4] Past this interchange, the southbound HOV restrictions end and I-270 continues north with four travel lanes in the southbound direction and an HOV lane, three express lanes and two local lanes in the northbound direction before reaching MD 124 (Quince Orchard Road).[1][4] Past MD 124, the local lanes in the northbound direction ends, and I-270 head northwest as an eight-lane freeway with four southbound lanes and an HOV lane and three travel lanes northbound. It passes through wooded areas, leaving Gaithersburg, and comes to an interchange with Middlebrook Road.[4] The freeway narrows to six lanes again past at this interchange, with three lanes in each direction including a northbound HOV lane. I-270 continues into the Germantown area and interchanges with MD 118 (Germantown Road). A short distance later, after passing by some business parks, I-270 comes to an interchange with MD 27 (Ridge Road) and Father Hurley Boulevard.[1][4] Past MD 27, I-270 heads into more rural areas of woods with some farm fields, paralleled by a set of power lines.[4] The road interchanges with MD 121 (Clarksburg Road) in Clarksburg and the northbound HOV restriction ends past this interchange, with I-270 continuing north as a four-lane freeway.[1] The power lines stop paralleling the route and it continues through more rural areas of woods and farms, running closely parallel to MD 355. The median widens, with trees in the middle, and I-270 has weigh stations on both sides.[4] The highway reaches Hyattstown, where it has an interchange with MD 109 (Old Hundred Road).[1][4]

Frederick County

I-270 northbound approaching Frederick in May 2008.

A short distance past the MD 109 interchange, I-270 crosses into Frederick County, continuing northwest through rural woodland and farmland. It reaches the Urbana area, where the route has an interchange with MD 80 (Fingerboard Road).[1][4] The highway briefly runs along the east side of MD 80 past this interchange before continuing through agricultural areas. It features a scenic overlook in the northbound direction as the road passes through Monocacy National Battlefield, which was the site of the Battle of Monocacy Junction. I-270 eventually leaves the battlefield area and continues into the commercial outskirts of Frederick.[4] Here, the road interchanges with MD 85 (Buckeystown Pike) near the Francis Scott Key Mall. I-270 continues through commercial areas before coming to its northern terminus at an interchange with I-70 and US 40 (Baltimore National Pike).[1][4] Past this interchange, the freeway continues north as the Frederick Freeway, a part of US 40 that interchanges with US 15 and US 340 a short distance north of I-270’s northern terminus.[4]

History

Interstate 70S
Location: FrederickBethesda
Existed: 1959–1975
1955 Yellow Book map of Washington, D.C. showing a proposed Interstate Highway running to Frederick.

In 1947, plans were made to construct a freeway called the Washington National Pike parallel to US 240 (present-day MD 355) between Bethesda and Frederick.[5] In 1953, the US 240 freeway was completed between MD 121 in Clarksburg and US 15 (now MD 85) in Frederick.[6][7] A year later, the freeway was extended down to MD 118 in Germantown.[8] The US 240 freeway was extended south to MD 28 in Rockville in 1956. Also, the US 240 freeway was completed from US 15 north to US 40.[9] The US 240 freeway was extended south to Montrose Road in 1958.[10] I-70S was designated onto the US 240 freeway in 1959.[11] In 1960, I-70S/US 240 was extended south to the Capital Beltway. With the completion of this freeway, MD 355 was designated onto the original alignment of US 240.[12] The construction of the Washington National Pike resulted in suburban growth along the corridor between Washington, D.C. and Frederick, with several federal agencies including the United States Atomic Energy Commission, the National Bureau of Standards, and the National Institutes of Health moving their headquarters to Montgomery County.[6] A western spur that provided access to southbound I-495 was eventually built and became I-270.[13]

I-70S was projected to continue past the Capital Beltway into Washington, D.C. on the North Central Freeway to connect directly to I-95. Plans for this freeway initially began in 1959 when a freeway was called for along the Georgia Avenue corridor.[14] In the mid-1960s, a study was proposed for the freeway that recommended several different routings between Washington, D.C. and the Capital Beltway.[15] By 1966, a route for the North Central Freeway was planned along a Baltimore & Ohio Railroad line running through the northeastern part of Washington and Takoma Park north to the Capital Beltway.[16] In a 1971 study by DeLeuw, Cather Associates and Harry Wesse & Associates, LTD, I-70S was planned to run from its southern terminus at I-495 and run concurrent with that route before turning south on the North Central Freeway and ending at I-95 in Washington.[13] The routing of the freeway through residential areas of Washington drew opposition from residents of the Takoma Park, Brookland, and Michigan Park neighborhoods who were successful in getting the freeway cancelled through their neighborhoods in 1970.[17] The North Central Freeway within Maryland was cancelled by the MDSHA in 1972 due to opposition from officials in Montgomery County.[18] In 1975, the Federal Highway Administration officially approved withdrawal of plans to construct the road south of the Capital Beltway.[19]

The concurrent US 240 designation was removed from I-70S in 1972.[20] On May 18, 1975, I-70S was designated I-270.[19] The western spur is now signed and publicly known simply as I-270 Spur. By the 1980s, traffic congestion had grown on I-270 in Montgomery County; as a result, a $200 million project widened the road between I-495 and MD 118 to its current configuration, with some portions being widened to twelve lanes. This widening led to growth of residences and businesses along the I-270 corridor as far north as Germantown and increased traffic counts along the road.[21] Much of I-270 in Montgomery County is now a hub for biotech firms.[22] By 1999, congestion on the road grew to then-projected 2010 levels.[21]

Future

The MDSHA is studying improvements for the I-270 corridor between Shady Grove Road and Frederick. Options for improvement include widening the highway to include more lanes with HOV and HOT lanes, as well as initiating rapid bus or light rail service along I-270 between Shady Grove and Clarksburg.[23] In addition, two new interchanges are planned for I-270 in Frederick County. The first planned interchange is with MD 75 near the Montgomery County border, which would involve extending MD 75 from MD 355 to the interchange with I-270 at a projected cost of $57,300,000. The other planned interchange is with Park Mills Road in Urbana, which has a projected cost of $48,900,000.[24] In Montgomery County, an interchange is being proposed with an extension of Watkins Mill Road in Gaithersburg. This proposed interchange, which is being pushed by Montgomery County, will see $125 million in construction spending.[25] Funding for this interchange first disappeared in September 2008 after the state of Maryland announced it was cutting $1.1 billion that was to go to transportation projects, later reinstated with the Transportation Infrastructure Investment Act of 2013 proposed to raise $4.4 billion Statewide over 6 years.[26][27]

Exit list

County Location mi
[1]
km Exit Destinations Notes
Montgomery Bethesda 0.00 0.00 I-495 east (Capital Beltway) – Silver Spring, College Park No access to I-495 south (counterclockwise)
MD 355 south – Bethesda Southbound exit and northbound entrance
1.54 2.48 1A MD 187 (Old Georgetown Road) Southbound exit is via exit 1
1.83 2.95 1B Rockledge Drive (MD 187B) Signed as exit 1 southbound
2.39 3.85 2 I-270 Spur to I-495 south – Washington, Northern Virginia Southbound exit and northbound entrance
Rockville 4.14 6.66 4 Montrose Road (MD 927) Signed as exits 4A (east) and 4B (west)
5.50 8.85 5 MD 189 (Falls Road)
6.46 10.40 6 MD 28 (West Montgomery Avenue) – Rockville, Darnestown Signed as exits 6A (east) and 6B (west)
8.39 13.50 8 Shady Grove Road / Redland Road
Gaithersburg 9.32 15.00 9
I-370 east to MD 200 / Sam Eig Highway
Signed as exits 9A (east, I-370) and 9B (west, Sam Eig Highway). I-370 exits 1A-B.
10.85 17.46 10 MD 117 to MD 124 west (Clopper Road, West Diamond Avenue) Northbound exit and southbound entrance
11.47 18.46 11 MD 124 (Quince Orchard Road, Montgomery Village Avenue) No northbound exit to westbound MD 124
Germantown 13.97 22.48 13 Middlebrook Road Northbound exit and southbound entrance; signed as exits 13A (east) and 13B (west)
14.74 23.72 15 MD 118 (Germantown Road) to MD 355 (North Frederick Road) – Germantown Signed as exits 15A (north) and 15B (south)
15.78 25.40 16 MD 27 (Father Hurley Boulevard) – Damascus Signed as exits 16A (east) and 16B (west)
Clarksburg 18.43 29.66 18 MD 121 (Clarksburg Road, Stringtown Road) – Boyds, Clarksburg
Hyattstown 22.29 35.87 22 MD 109 (Old Hundred Road) – Hyattstown, Barnesville
Frederick Urbana 26.03 41.89 26 MD 80 (Fingerboard Road) – Urbana, Buckeystown
Frederick 31.16 50.15 31 MD 85 (Buckeystown Pike) – Frederick, Buckeystown Signed as exits 31A (north) and 31B (south)
32.60 52.46 32 I-70 / US 40 east – Hagerstown, Baltimore No exit number southbound
32.60 52.46 US 15 north / US 40 west – Frederick, Gettysburg Continuation beyond I-70
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Interstate 270 Spur

Spur plate blue.PNG
I-270.svg

Interstate 270 Spur
Location: Bethesda, Maryland
Length: 2.10 mi[1] (3.38 km)

Interstate 270 Spur (referred to as I-270Y by the MDSHA) is a 2.10-mile (3.38 km) spur off I-270 that connects I-270 and the Capital Beltway.[1] It carries traffic headed southbound on I-270 to southbound I-495 and from northbound I-495 to northbound I-270, filling in the missing movements not available at the interchange between I-270 and I-495.[28] The road heads north from I-495 as a six-lane freeway with a 55 mph (89 km/h) speed limit. The left lane in each direction serves as a HOV lane in operation between 3:30 and 6:30 PM weekdays in the northbound direction and between 6:00 and 9:00 AM weekdays in the southbound direction.[1][28] I-270 Spur continues north through wooded suburban areas to an interchange with Democracy Boulevard adjacent to the Westfield Montgomery shopping mall.[28] A short distance later, the road has a southbound exit and northbound entrance for the HOV lanes onto Fernwood Drive. Past here, I-270 Spur merges into northbound I-270 with separate ramps for the travel lanes and the HOV lanes.[1][28] Before 1975, when I-270 was called I-70S, this road was called I-270, without the word "Spur".

Exit list

The entire route is in Bethesda, Montgomery County.

mi[1] km Exit Destinations Notes
0.00 0.00 I-495 south (Capital Beltway) – Washington, Northern Virginia Southern terminus; no access to I-495 east (clockwise)
1.00 1.61 1 Democracy Boulevard
1.35 2.17 Westlake Terrace / Fernwood Road Southbound exit and northbound entrance from HOV lanes
2.10 3.38 I-270 north – Rockville, Frederick Northern terminus; no access to I-270 south
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. 21.0 21.1 Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. 28.0 28.1 28.2 28.3 Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".