Tennessee State Route 840

From Infogalactic: the planetary knowledge core
(Redirected from Interstate 840 (Tennessee))
Jump to: navigation, search

x70px

State Route 840
Tennessee National Guard Parkway
Route information
Maintained by TDOT
Length: 77.28 mi[1] (124.37 km)
Existed: 1991 – present
Major junctions
West end: I-40 near Dickson
  <templatestyles src="Plainlist/styles.css"/>
East end: I-40 near Lebanon
Location
Counties: Dickson, Hickman, Williamson, Rutherford, Wilson
Highway system
US 641 SR 1

Tennessee State Route 840 (SR 840), also designated as Tennessee National Guard Parkway,[2] is a state highway around Nashville, Tennessee, built by the Tennessee Department of Transportation (TDOT). First proposed by former Governor Lamar Alexander as part of a system of Bicentennial Parkways, construction began in 1991 and was completed in 2012. The freeway is 77.28 miles (124.37 km) long,[1] and it serves the cities of Lebanon, Murfreesboro, Franklin, and Dickson.[3][4]

In 2015, approval was given by the Federal Highway Administration (FHWA) and the American Association of State Highway and Transportation Officials (AASHTO) to redesignate SR 840 as Interstate 840 (I-840) as part of its integration into the Interstate Highway System. As of January 2016, the highway had not been resigned by TDOT.

History

The SR 840 project was initiated in 1986 with the passage of the Better Roads Program in the Tennessee legislature.[2] While initially referred to as Interstate 840 (I-840) in the state plan,[2] the highway was constructed entirely with state transportation funds and is officially referred to as a state route.[5] The first contract for construction was signed in 1991, and work progressed in stages. The section of road between I-40 at Lebanon and I-24 near Murfreesboro was completed in November 1996, between I-24 and I-65 near Franklin in October 2001, and between I-40 near Dickson and SR 100 in December 2002.[2][6] Due to high costs and environmental concerns, the proposed northern half of SR 840 was indefinitely placed on hold in 2003.[2] As work moved into Williamson County, residents filed complaints and eventually lawsuits in an effort to have TDOT address both environmental and aesthetic issues, considerably slowing work in that county.[5] The full southern route of SR 840 was opened on November 2, 2012.[2] The project took 26 years to complete at a cost of $753.4 million.[5]

Northern loop

Plans to construct a northern loop of SR 840 north of Nashville and past Dickson, Clarksville, Springfield, and Gallatin were abandoned since the Tennessee General Assembly ordered TDOT to discontinue further studies and planning of that highway because of state budget problems. An entire circular loop would possibly be about 178 miles (286.5 km) long. Other important objections against additional extensions of the SR 840 highway include the hilly nature of the terrain north of Nashville (the Highland Rim), which would require huge and costly amounts of excavation, soil relocation, and bridge construction. In October 2003, TDOT placed the northern loop plan on indefinite hold, citing a lack of documented transportation needs and lack of participation from local politicians.[1]

Redesignation

In 2015, TDOT submitted a request to AASHTO to redesignate SR 840 as I-840. Though the application had an error that required TDOT to refile it, AASHTO conditionally approved it and submitted it to the FHWA for their approval.[7][8] FHWA approved the change on July 22, 2015, and AASHTO finalized their approval on September 25, 2015.[9]

Exit list

County Location mi[4] km Exit Destinations Notes
Dickson 0.0 0.0 1 I-40 – Nashville, Memphis Western terminus; signed as exits 1A (west) and 1B (east)
Hickman
No major junctions
Williamson 7.3 11.7 7 SR 100 / SR 46 – Fairview, Centerville
14.1 22.7 14 SR 46 (Pinewood Road) – Leiper's Fork
22.9 36.9 23 SR 246 (Carter's Creek Pike)
Thompson's Station 28.3 45.5 28 US 31 (Columbia Pike) – Columbia, Spring Hill
30.3 48.8 30 US 431 / SR 106 (Lewisburg Pike) – Franklin
31.1 50.1 31 I-65 – Nashville, Birmingham, AL Also the route to Huntsville, AL; signed as exits 31A (south) and 31B (north)
34.9 56.2 34 Peytonsville–Trinity Road
37.1 59.7 37 Arno Road
Triune 41.9 67.4 42 US 31A / US 41A / SR 11 (Horton Highway) – Triune, Nolensville, Eagleville, Chapel Hill
Rutherford 46.9 75.5 47 SR 102 (Almaville Road) – Smyrna
50.8 81.8 50 Veterans Parkway – Blackman
Murfreesboro 53.1 85.5 53 I-24 – Nashville, Chattanooga Exit to Smyrna and Murfreesboro; signed as exits 53A (east) and 53B (west)
55.1 88.7 55 US 41 / US 70S / SR 1 (NW Broad Street / New Nashville Highway) – Murfreesboro, Smyrna Signed as exits 55A (south/east) and 55B (north/west)
57.8 93.0 57 Sulphur Springs Road
61.4 98.8 61 SR 266 (West Jefferson Pike) – Smyrna
65.2 104.9 65 SR 452 (Bill France Boulevard / Maddox Road / Mona Road) – Nashville Superspeedway
Wilson 67.2 108.1 67 Couchville Pike Exit to Cedars of Lebanon State Park
70.6 113.6 70 Stewarts Ferry Pike – Gladeville
72.0 115.9 72 SR 265 to SR 109 (Central Pike)
76.8 123.6 76 I-40 – Nashville, Knoxville Eastern terminus; signed as exits 76A (east) and 76B (west) to Lebanon
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".