LNWR DX Goods class

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
LNWR DX Goods Class [1] [2]
300px
No. 578 in original condition and livery
Type and origin
Power type Steam
Designer John Ramsbottom
Builder Crewe works
Build date 1858–1862
Total produced 943
Specifications
Configuration 0-6-0
Gauge 4 ft 8 12 in (1,435 mm)
Driver diameter 5 ft 2 in (1.575 m)
Loco & tender weight 27 long tons (27 t)
(29 long tons (29 t) when fueled)
Water cap 2,000 imp gal (9,100 L)
Boiler 4 ft 2 in (1.27 m) diameter
x 10 ft 6 in (3.20 m) length
Boiler pressure 120 psi (0.83 MPa)
Firegrate area 15 sq ft (1.4 m2)[1]
or 17.1 sq ft (1.59 m2)[2]
Heating surface 1,074 sq ft (99.8 m2)
Cylinders two, inside
Cylinder size 17 in (430 mm) diameter,
24 in (610 mm) stroke
Valve gear Stephenson
Performance figures
Tractive effort 11,410 lbf (50.8 kN)
Career
Operators London and North Western Railway, Lancashire and Yorkshire Railway
Withdrawn 1902–1930
Disposition All scrapped

The London and North Western Railway (LNWR) DX Goods class was a class of 0-6-0 steam locomotive, designed by John Ramsbottom for freight duties. 943 were constructed making them the largest single class of locomotives built in the United Kingdom.

History

File:LNWR engine No.2022 Special DX.jpg
No. 2022 Francis Webb rebuild, Special DX in photographic grey livery

The "DX" goods engine was the first original design produced by Ramsbottom, shortly after becoming Locomotive Superintendent of the Northern Division. An experimental prototype was developed at Longsight whilst Ramsbottom was only in charge of the North-Eastern Division.[1] The first regular example was completed at Crewe in September 1858, and was given the running number 355. This was the 399th locomotive built at Crewe, but it was the practice of the LNWR to reuse the numbers of withdrawn locomotives.[1]

The first DX, No. 355, was named Hardman, and carried the name on a curved brass plate above the driving wheels. It was painted in the same dark green livery as used by Ramsbottom's predecessor, Francis Trevithick, but edged with a single black line. Fifty-four of the early DX locomotives were given names, but all were removed by 1864, with some re-used on passenger locomotives.

Four 0-4-2 versions of this locomotive type were built by Robert Stephenson and supplied to the Sydney Railway Company in 1855 as the first motive power for the new railway company. They were virtually identical in specification, except for slightly larger driving wheels at 5 ft 6 in (1.676 m) diameter and cylinders being a smaller 16-inch (410 mm) bore than the 17 in (432 mm) of the original design.

857 examples of Ramsbottom’s standard goods design were built for the LNWR at Crewe works between 1858 and 1872.[4][5] The class has been described as ‘the earliest example of standardization and mass productions of locomotives on a large scale,'[6] and ‘a remarkable instance of standardisation at a time when most railways had many different classes, each class with only few engines.’.[2] During the 1870s driving cabs were added. 278 examples of a saddle tank version of the design were built after 1870, known as the LNWR Special Tank.

In addition to the 857 examples used by the LNWR, a further 86 examples of the original design were constructed at Crewe for the Lancashire and Yorkshire Railway between 1871 and 1874.[1] This alarmed independent locomotive manufacturers, who sought an injunction to stop the practice;[7] granted on December 16, 1875.[8] In April 1881 Francis Webb rebuilt 500 examples with a new 150 psi boiler and vacuum brakes for working passenger trains. These became known as ‘Special’ (or vacuum) DX’s.[9]

Accidents and incidents

  • On 12 January 1899, locomotive 1418 was hauling a freight train that was derailed at Penmaenmawr, Caernarfonshire due to the trackbed being washed away in a storm. Both locomotive crew were killed.[10]

Withdrawals

Withdrawals began in 1902 but there were still 88 in existence on the formation of the London Midland and Scottish Railway in 1923. The last survivor was withdrawn in 1930.[11] All were scrapped.

References

  1. 1.0 1.1 1.2 1.3 1.4 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Baxter 1978, pp. 124–130.
  4. Baxter 1977, p. 12.
  5. Baxter 1978, pp. 124–157.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Trevena 1981, pp. 16–17.
  11. Casserley & Johnson 1974, p. 7.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.