Las Conchas Fire

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

Las Conchas Fire
File:Las Conchas Fire1.jpg
From Española, New Mexico, June 29, 2011
Location New Mexico
Statistics
Date(s) June 26, 2011
1:00 pm (MDT)
Burned area 156,293 acres,[1] 244 sq mi (630 km2)
Cause Power line[2]
Buildings
destroyed		 63 residences, 49 outbuildings[3]
Injuries 15[1]
Fatalities 0
File:Las Conchas Fire.jpg
From Placitas, New Mexico, July 6, 2011.

The Las Conchas Fire was a wildfire in New Mexico, USA, in 2011. The fire started in Santa Fe National Forest and burned more than 150,000 acres, threatening Los Alamos National Laboratory and the town of Los Alamos. After five days of burning, it became the largest wildfire in New Mexico state history at the time,[4] though it was surpassed the following year by the Whitewater-Baldy Complex Fire.[5]

Progression

The fire started on June 26, 2011, at approximately 1:00 pm Mountain Daylight Time[3] when a tree fell on a power line.[2] On the first day, driven by strong and unpredictable winds, the fire burned 43,000 acres[6][7][8]—a rate of about an acre per second.[9]

By the evening of the first day of the fire, no part was contained, according to local fire officials, and the county was put under voluntary evacuation.[10] The fire burned over 61,000 acres by the end of the day on June 27,[6] pushed north by winds into the Pajarito Mountain Ski Area. The fire also burned south, threatening the town of Cochiti, New Mexico.[11] On June 28, this estimate was increased to nearly 61,000 acres.[12] On June 29, it was reported that the fire was 3 percent contained, 12 miles southwest of Los Alamos, and had burned nearly Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value)..[13] By then the fire had pushed farther north into the land owned and held sacred by Santa Clara Pueblo. By June 30, the burned area had increased to over Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value)., making it the largest fire in New Mexico history (the previous largest was the 2003 Dry Lakes Fire, which burned over 94,000 acres).[4] Mandatory evacuation orders were issued for Los Alamos as of June 27,[14] and Los Alamos National Laboratory was closed to all non-essential personnel.[15][16] The evacuation order was lifted on July 3, at which time Los Alamos residents were allowed to return to their homes.[17] The Los Alamos National Laboratory re-opened on July 6.[18] As of July 14, 2011, the fire was 57% contained.[3]

On June 27, a one-acre spot fire burned on Los Alamos National Laboratory until firefighters extinguished it. Authorities reported that the fire did not threaten essential buildings. That was the only time the fire burned on lab property, as the fire then moved away.[19][20]

The fire was 100% contained on August 3 and efforts are now underway for recovery of the burned areas.[1]

Sixteen thousand acres of Santa Clara Pueblo burned in the fire, much of it in the pueblo's watershed. Forty-five percent of the watershed was burned, leading to fears of flooding. The pueblo responded by preparing for floods.[21] Currently, much of the burned area is still at risk for dangerous flash floods.[1]

Destructive flooding occurred in the burned region as the result of a monsoon rainstorm on August 21.[9][22]

See also

References

  1. ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ http://www.google.com/hostednews/ap/article/ALeqM5ilQyGtcIidD9kimq_nP16vGMYh9w?docId=b7a4a72972344896a05c38581464a3e0
  18. ↑ http://www.lanl.gov/news/releases/fire_updates.html
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Las_Conchas_Fire&oldid=703423881"