Lipno Dam

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Lipno Dam
Lipno1.JPG
Location Lipno
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Type reservoir
Primary inflows Vltava
Primary outflows Vltava
Basin countries Czech Republic
Max. length 42 km
Max. width 5 km
Surface area 48.70 km²
Average depth 6.5 m
Max. depth 25 m
Water volume 309,502,000 m3 (0.074253 cu mi)
Surface elevation 725.6 m
Islands 1

The Lipno Dam (Czech: přehrada Lipno) is a dam and hydroelectric plant constructed along the Vltava River in the Czech Republic.

History

Due to frequent flooding and subsequent damage, the Vltava River in Southern Bohemia was problematic for Český Krumlov and other settlements situated on it. To harness the power of the river, and to prevent continued catastrophe, it was decided that a hydroelectric plant would be built high on the Vltava.[1] Preparatory work at the town of Lipno began in 1951. Construction on the dam began in 1952, and the dam was completed in 1960.[2]

Geography

The stream bed of the Vltava near Lipno was chosen because it has a slight incline, facilitating the construction of a reservoir there. The dam is built along the highest-elevated stage of the Vltava River's cascade [1] (roughly 726 metres above sea level), thus enabling large amounts of hydropower out-put. This area is mountainous, and borders the Šumava National Park and Nature Reserve. A smaller reservoir near Vyšší Brod is linked to the main reservoir by an artificial underground waterway. This smaller reservoir, named 'Lipno II', serves to level the water of the main reservoir.

Power plant

Lipno Hydro Power Plant has two turbines with a nominal capacity of 64 MW each[3] having a total capacity of 128 MW.

References

External links

  • Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons
  • http://www.pvl.cz