In photometry, luminous energy is the perceived energy of light. This is sometimes called the quantity of light. Luminous energy is not the same as radiant energy, the corresponding objective physical quantity. This is because the human eye can only see light in the visible spectrum and has different sensitivities to light of different wavelengths within the spectrum. When adapted for bright conditions (photopic vision), the eye is most sensitive to light at a wavelength of 555 nm. Light with a given amount of radiant energy will have more luminous energy if the wavelength is 555 nm than if the wavelength is longer or shorter. Light whose wavelength is well outside the visible spectrum has a luminous energy of zero, regardless of the amount of radiant energy present.
The SI unit of luminous energy is the lumen second, which is unofficially known as the talbot in honor of William Henry Fox Talbot. In other systems of units, luminous energy may be expressed in basic units of energy.
Illustration of some photometry units
|Luminous energy||Qv [nb 2]||lumen second||lm⋅s||T⋅J [nb 3]||Units are sometimes called talbots.|
|Luminous flux / luminous power||Φv [nb 2]||lumen (= cd⋅sr)||lm||J [nb 3]||Luminous energy per unit time.|
|Luminous intensity||Iv||candela (= lm/sr)||cd||J [nb 3]||Luminous power per unit solid angle.|
|Luminance||Lv||candela per square metre||cd/m2||L−2⋅J||Luminous power per unit solid angle per unit projected source area. Units are sometimes called nits.|
|Illuminance||Ev||lux (= lm/m2)||lx||L−2⋅J||Luminous power incident on a surface.|
|Luminous exitance / luminous emittance||Mv||lux||lx||L−2⋅J||Luminous power emitted from a surface.|
|Luminous exposure||Hv||lux second||lx⋅s||L−2⋅T⋅J|
|Luminous energy density||ωv||lumen second per cubic metre||lm⋅s⋅m−3||L−3⋅T⋅J|
|Luminous efficacy||η [nb 2]||lumen per watt||lm/W||M−1⋅L−2⋅T3⋅J||Ratio of luminous flux to radiant flux or power consumption, depending on context.|
|Luminous efficiency / luminous coefficient||V||1|
|See also: SI · Photometry · Radiometry|
- Standards organizations recommend that photometric quantities be denoted with a suffix "v" (for "visual") to avoid confusion with radiometric or photon quantities. For example: USA Standard Letter Symbols for Illuminating Engineering USAS Z7.1-1967, Y10.18-1967
- Alternative symbols sometimes seen: W for luminous energy, P or F for luminous flux, and ρ or K for luminous efficacy.
- "J" here is the symbol for the dimension of luminous intensity, not the symbol for the unit joules.
|This optics-related article is a stub. You can help Infogalactic by expanding it.|