Mary Valley Heritage Railway

From Infogalactic: the planetary knowledge core
(Redirected from Mary Valley Railway)
Jump to: navigation, search
MVHR Mary Valley Heritage Railway
Traveston
40km Imbil
30km Kandanga
23km Amamoor
20km Dagun
0km Gympie (Central)
Gympie North

The Mary Valley Heritage Railway conduct steam train trips and tours from Gympie through the Mary Valley in the Cooloola Region of Queensland, Australia. It is one of the region's biggest tourist attractions and is managed by a not-for-profit organisation consisting a few paid workers and many volunteers.[1] It has been described as Australia's third biggest heritage railway.[2]

The Valley Rattler, C17 802
File:ImbilRailwayStation.JPG
Train station at Imbil
File:Gympie.jpg
The Rattler in motion

Railway line

Some of the line crossings have a five km/h speed limit with the top speed limited to 25 km/h.[1] In 2011, concerns were raised about the safety of the line. Government inspectors found no significant safety issues.[3]

In 2010, the Department of Employment, Economic Development and Innovation conducted a review of the operations of the railway.[4] It found the railway was operating at a significant economic loss and was dependent on grant income.

During major floods when roads in the area are closed the railway is used as a shuttle service.[5]

Scenic tour

"Ride The Rattler" scenic tours are operated by The Mary Valley Heritage Railway (MVHR) every Saturday, Sunday and Wednesday from the historic Gympie Railway Station. This historic 40 km journey commences at Gympie, and after crossing the Mary River, negotiates an abundance of curves, gradients and bridges to pass through the small country villages of Dagun, Amamoor and Kandanga to Imbil.

The steam train, a fully restored C17 class locomotive from the early 1920s, departs Gympie station at 10 am. The Gympie Station itself dates back to pre-1880. As the train travels south, it passes through the southern end of the city of Gympie.

After crossing the Mary River, the railway line enters the Mary Valley. The line wanders away from the river to negotiate the valleys of some of its main tributaries, including the Yabba, Kandanga and Amamoor Creeks. In this area there are a number of curves, gradients and bridges as you head towards the station of Kandanga.

The country village of Kandanga was established in 1910 to service patrons travelling on the proposed Mary Valley line which became operational as far as Kandanga in 1914. The original Kandanga railway station, now restored to its former glory, contains an interesting pictorial record of the history of the Mary Valley line.

Travelling through to Imbil, the lines traverses an interesting gorge section through mainly timbered country, before reaching a short tunnel that pierces a ridge of coastal ranges. The track then descends quickly to the line's largest town, Imbil. The Imbil Railway Bridge over Yabba Creek was constructed between 1911 and 1915.[6]

Heritage listings

The Mary Valley Heritage Railway has a number of heritage-listed sites, including:

See also

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.

Further reading

External links

Lua error in package.lua at line 80: module 'strict' not found.

Retrieved from "https://infogalactic.com/w/index.php?title=Mary_Valley_Heritage_Railway&oldid=688766607"