Mean anomaly

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Mean anomaly diagram 1.png
Area swept out per unit time by an object in an elliptical orbit (grey) and by an imaginary object in a circular orbit (red) which completes its orbit in the same period of time. Both sweep out equal areas in equal times, but the angular rate of sweep varies for the elliptical orbit and is constant for the circular orbit. Shown are mean anomaly and true anomaly for two units of time.

In celestial mechanics, the mean anomaly is an angle used in calculating the position of a body in an elliptical orbit in the classical two-body problem. It is the angular distance from the pericenter which a fictitious body would have if it moved in a circular orbit, with constant speed, in the same orbital period as the actual body in its elliptical orbit.[1][2]

Definition

Define T as the time required for a particular body to complete one orbit. In time T, the radius vector sweeps out 2π radians or 360°. The average rate of sweep, n, is then

n={2\pi}/{T} or
n=360^\circ/T,

which is called the mean angular motion of the body, with dimensions of radians per unit time or degrees per unit time.

Define \tau as the time at which the body is at the pericenter. From the above definitions, a new quantity, M, the mean anomaly can be defined

M=n(t-\tau),

which gives an angular distance from the pericenter at arbitrary time t,[3] with dimensions of radians or degrees.

Because the rate of increase, n, is a constant average, the mean anomaly increases uniformly (linearly) from 0 to 2π radians or 0° to 360° during each orbit. It is equal to 0 when the body is at the pericenter, π radians (180°) at the apocenter, and 2π radians (360°) after one complete revolution.[4] If the mean anomaly is known at any given instant, it can be calculated at any later (or prior) instant by simply adding (or subtracting) n \, \delta t where \delta t represents the time difference.

Mean anomaly does not measure an angle between any physical objects. It is simply a convenient uniform measure of how far around its orbit a body has progressed since pericenter. The mean anomaly is one of three angular parameters (known historically as "anomalies") that define a position along an orbit, the other two being the eccentric anomaly and the true anomaly.

Formulae

The mean anomaly M can be computed from the eccentric anomaly E and the eccentricity e with Kepler's Equation:

M =  E - e \sin E.

Mean anomaly is also frequently seen as

M =  M_0 + n(t-t_0),

where M_0 is the mean anomaly at epoch and t_0 is the epoch, a reference time to which the orbital elements are referred, which may or may not coincide with \tau, the time of pericenter passage. The classical method of finding the position of an object in an elliptical orbit from a set of orbital elements is to calculate the mean anomaly by this equation, and then to solve Kepler's equation for the eccentric anomaly.

Define \varpi as the longitude of the pericenter, the angular distance of the pericenter from a reference direction. Define l as the mean longitude, the angular distance of the body from the same reference direction, assuming it moves with uniform angular motion as with the mean anomaly. Thus mean anomaly is also [5]

M = l - \varpi.

Mean angular motion can also be expressed,

n=\sqrt{\frac{\mu}{a^3}},

where \mu is a gravitational parameter which varies with the masses of the objects, and a is the semi-major axis of the orbit. Mean anomaly can then be expanded,

M=\sqrt{\frac{\mu}{a^3}}(t-\tau),

and here mean anomaly represents uniform angular motion on a circle of radius a.[6]

Mean anomaly can be expressed as a series expansion of the eccentricity e and the true anomaly \nu,[7]

M=\nu - 2e\sin\nu + \left(\frac{3}{4}e^2+\frac{1}{8}e^4\right)\sin2\nu - \frac{1}{3}e^3\sin3\nu + \frac{5}{32}e^4\sin4\nu \dots

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Meeus (1991), p. 183
  5. Smart (1977), p. 122
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

External links

ru:Элементы орбиты#Аномалии