Monotype Imaging

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Monotype Imaging Holdings, Inc. (NASDAQTYPE) is a Delaware corporation based in Woburn, Massachusetts. It specialises in digital typesetting and typeface design as well as text and imaging solutions for use with consumer electronics devices.[1] Monotype Imaging Holdings and its predecessors and subsidiaries have been responsible for many developments in printing technology—in particular the Monotype machine, which was the first fully mechanical typesetter, and the Linotype machine—and the design and production of typefaces in the 19th and 20th centuries. Monotype developed many of the most widely used typeface designs, including Times New Roman, Gill Sans, Arial, Bembo and Albertus.

Monotype has carried out a series of acquisitions from 2000 onwards of companies such as Linotype GmbH, International Typeface Corporation, Bitstream Inc. and FontShop. This has gained it the rights to many further widely-known designs, including Helvetica, ITC Franklin Gothic, Optima, Avant Garde, Palatino and FF DIN. It also owns the MyFonts online retailer used by many independent font design studios.

History

Monotype System

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Monotype caster

The Lanston Monotype Machine Company was founded by Tolbert Lanston in Philadelphia, Pennsylvania, in 1887. Lanston had a patented mechanical method of punching out metal types from cold strips of metal which were set (hence typesetting) into a matrix for the printing press. In 1896 Lanston patented the first hot metal typesetting machine and Monotype issued Modern Condensed, its first typeface. The licenses for the Lanston type library have been acquired by P22, a digital type foundry based in Buffalo, New York.

In a search for funding, the company set up a branch in London in 1897 under the name Lanston Monotype Corporation Ltd. In 1899 a new factory was built in Salfords near Redhill in Surrey where it has been located for over a century. The company was of sufficient size to justify the construction of its own railway station.

The original Monotype machine used "hot metal" to form individual letters. Thus spelling mistakes could be corrected by adding or removing individual letters. This was particularly useful for "quality" printing - such as books. In contrast, the Linotype machine formed a complete line of type in one bar. Editing these required replacing an entire line (and if the replacement ran onto another line, the rest of the paragraph). But Linotype slugs were easier to handle if moving a complete section of text around a page. This was more useful for "quick" printing - such as newspapers.

The typesetting machines were continually improved in the early years of the 20th century, with a typewriter style keyboard for entering the type being introduced in 1906. This arrangement addressed the need to vary the space between words so that all lines were the same length.

The keyboard operator types the copy, each key punching holes in a roll of paper tape that will control the separate caster. A drum on the keyboard indicates to the operator the space required for each line. This information is also punched in the paper. Before fitting the tape to the caster it is turned over so that the first holes read on each line set the width of the variable space. The subsequent holes determine the position of a frame, or die case, that holds the set of matrices for the face being used. Each matrix is a rectangle of copper recessed with the shape of the letter. Once the matrix is positioned over the mould that forms the rest of the piece of type being cast, molten type metal is injected.

Typefounding

Error creating thumbnail: File with dimensions greater than 25 MP
A sample of various Monotype designs in digital format.

Monotype's role in design history is not merely due to their supply of printing equipment but due to their commissioning of many of the most important typefaces of the twentieth century.

The company's first font of 1896 was a rather generic design, now named Modern, influenced by Bodoni and Scotch Roman designs. However, by the 1920s the company's British branch was well known for commissioning popular, historically-influenced designs that revived some of the best typefaces of the past, with particular attention to the early period of printing from the Renaisssance to the late eighteenth-century.[2][3][4][5] This programme was a major part of the typographic renaissance of the period, a part of the arts and crafts movement, and was particularly led by executives including Stanley Morison, Beatrice Warde and engineering expert F.H. Pierpont, under managing director William Isaac Burch, who led the company from 1924 to 1942. Original typefaces commissioned included Gill Sans, Times New Roman and Perpetua.[6]

To promote its image, the company ran a magazine, the Monotype Recorder, over most of the twentieth century, and also ran a compositor (typesetter operator) training school in London.[7]

In 1936, the company was floated on the London Stock Exchange and became the Monotype Corporation Ltd. Later[when?] the company was split into three divisions: Monotype International, which manufactured spinning mirror switched laser beam phototypesetters; Monotype Limited, which continued the hot metal machines; and Monotype Typography, which designed and sold typefaces. A research and development department was set up in Cambridge to isolate it from day to day production issues. They produced the first Laser typesetter in 1976, the Monotype Lasercomp.[8]

The American branch lagged behind the British in artistic reputation. Their designs are now often rather obscure, since (unlike products from the British branch) few have been made widely available through bundling with Microsoft products. The company employed Frederic Goudy on several serif font projects which were well-received at the time, and on staff type designer Sol Hess, who created the geometric sans-serif Twentieth Century as a competitor to the German Futura.[9][10][11][12]

Consolidation and reorganization

In 1992 The Monotype Corporation Ltd. appointed Administrative Receivers on 5 March and four days later Monotype Typography Ltd. was established. Cromas Holdings, an investment company based in Switzerland, bought the Monotype Corporation Ltd. and Monotype Inc. (excluding Monotype Typography) and five other direct subsidiary companies in France, Germany, Italy, the Netherlands, and Singapore. Monotype Systems Ltd. was the adopted name for the new organization with Peter Purdy as Chairman, the name Monotype was under license from Monotype Typography Ltd which retained the trademark Monotype. Monotype Systems Ltd. focused on selling pre-press software and hardware, raster image processors and workflow.

Cromas Holdings reorganized its publishing interests with the formation of the International Publishing Asset Holding Ltd. effectively controlling Monotype Systems Ltd., QED Technology Ltd., and GB Techniques Ltd.

Monotype Systems Ltd. purchased Berthold Communications; the UK subsidiary of the German composing equipment supplier.

In June 2002, Monotype Systems Limited was re-branded, IPA Systems Limited, as this marked the end of the existing trademark licence with Monotype Corporation. In the US Monotype Inc became alfaQuest Technologies Limited. Both companies still sell pre-press software and hardware.

In 1999, Agfa-Compugraphic acquired the Monotype Corporation, which was renamed Agfa Monotype. In late 2004, after six years under the Agfa Corporation, the Monotype assets were acquired by TA Associates, a private equity investment firm based in Boston. The company was incorporated as Monotype Imaging, with a focus on the company's traditional core competencies of typography and professional printing.

Monotype was the first company to produce a digital version of the handwritten Persian script, Persian Nasta'liq. A Chinese "keyboard" was developed to typeset Chinese characters; it consisted of a book with a stylus. As the pages were turned, the page number was detected electrically and this was combined with the position of the character selected by the stylus on a large grid.

In early 2000, Monotype launched Fontwise, the first software to audit desktops for licensed and unlicensed (not necessarily illegal) fonts.

On 2 October 2006, Monotype Imaging Inc. announced that it acquired Linotype GmbH, a subsidiary of Heidelberger Druckmaschinen AG.

On 18 September 2006, Monotype Imaging Inc. announced that it acquired China Type Design Limited, a typeface design and production company based in Hong Kong. CTDL was responsible for developing Microsoft JhengHei, the default traditional Chinese interface font for Windows Vista. The deal also secured an exclusive relationship with Creative Calligraphy Center (CCC), a font production company in Zhuhai, China, with 30 production specialists.

On 11 December 2009, Monotype Imaging Inc. announced that it acquired Planetweb, Inc., a developer specialized in applications and development tools for embedded devices.

On 8 December 2010, Monotype Imaging announced the acquisition of Ascender Corp., a provider of fonts and font technologies used in computers, mobile devices, consumer electronics and software products.

In March 2012, Monotype acquired Bitstream Inc., a digital font retailer. The deal also gave Monotype ownership of the MyFonts font sale website used by many independent designers and its WhatTheFont recognition service.[13]

On 15 July 2014, Monotype Imaging Inc. announced that it acquired FontShop, the last large independent digital font retailer.[14]

Typefaces

<templatestyles src="Div col/styles.css"/>

Divisions

  • Monotype Imaging Inc.: Monotype's American headquarters in Woburn, Massachusetts.
  • Monotype Imaging Ltd.: Monotype's UK branch in Surrey, England.
  • Linotype GmbH: Monotype's European affiliate in Bad Homburg (Germany).
  • China Type Design Ltd.: A typeface design and production company based in Hong Kong.
  • Monotype Imaging K. K.: Monotype's Japanese branch in Tokyo.

See also

References

  1. 2008 SEC Annual Report:.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Monotype Typography
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.

External links

Corporate information and official digital font releases:

P22 digitisations:

On the Monotype System:

Metal and early phototype period publicity material:

Monotype fonts in metal type:

For specimen images of specific fonts, see individual Wikipedia articles.