Morgan 4/4

Morgan 4/4
File:1995morgan4-4.jpg A 1995 Morgan 4/4.
Overview
Manufacturer	Morgan Motor Company
Production	1936-present
Body and chassis
Class	Front mid-engined Sports car
Body style	2-door roadster
Related	Morgan +4
Powertrain
Engine	see text

Morgan 4/4 was the Morgan Motor Company's first car with four wheels. It appeared in 1936. Its model designation "4-4" (later "4/4") stood for four wheels and four cylinders. Earlier Morgans had been three-wheelers, only, typically with V-twin engines. Apart from a break during World War II (and the period March 1951 to September 1955) the 4/4 has been in continuous production from its debut right up to the present day. Engine capacity has increased from the 1,122 cc Coventry Climax engine in 1936 to a 1.8-litre Ford engine in 2004 (except of a 997cc Kent engine between 1960 and 1961), although it is currently back down to 1,595 cc.

4-4 Two-Seater

Morgan 4/4 Series I
File:Bonhams - The Paris Sale 2012 - Morgan 4 4 Sports - 1947 - 001.jpg Morgan 4-4 Sports two-seater, 1947
Overview
Production	1936-1950 1,720 made
Powertrain
Engine	1.1 L Coventry Climax I4 1.2 L Standard I4
Dimensions
Wheelbase	92 in (2,337 mm)

The original open two-seater 4-4 was introduced in 1936 and ended up being the most popular of the three body options available. 663 were built by 1939 and 249 more from 1946 to 1950, representing 53% of the overall production.

For the first years the car had a 1,122 cc Coventry Climax engine with 34 bhp (25 kW; 34 PS), superseded from 1939 by a Standard Special 1,267 cc overhead valve engine with 38.8 bhp (29 kW; 39 PS). A four-speed Meadows gearbox was used until 1938, then a Moss gearbox.

4-4 Four-Seater

The four-seat version was introduced in 1937 and 99 were built by 1939 and a further 140 from 1946 to 1950.

File:Bonhams - The Paris Sale 2012 - Morgan 4 4 Drophead Coupé - 1939 - 006.jpg

Rear view of 1939 Drophead Coupé

4-4 Drophead Coupé

The Drophead Coupé was introduced in 1938 with 58 built by 1939 and another 106 from 1946 to 1950. This has a better folding roof and permanent window frames, along with certain other creature comforts.

4/4 Series II

Morgan 4/4 Series II
File:1957 Morgan 4 4 Series II.jpg
Overview
Production	1955-1960 386 made
Powertrain
Engine	1,172 cc Ford 10HP SV I4
Dimensions
Wheelbase	96 in (2,438 mm)
Length	144 in (3,658 mm)
Width	56 in (1,422 mm)
Height	49 in (1,245 mm)

The Series II, now the 4/4 rather than the 4-4, was introduced in 1955 with 386 built by October 1960. Although very similar in appearance to the old 4-4 it was virtually a new car with a chassis based on the one used in the Morgan Plus 4. The traditional independent front suspension using sliding pillars and coil springs was fitted with a rigid axle and semi-elliptic leaf springs at the rear. Disc wheels were fitted as standard items.

A side-valve 1,172 cc Ford 100E engine was used with a Ford three-speed gearbox. The engine produced 36 bhp. Hydraulic brakes with 9 in (229 mm) drums were fitted. It was also available in 40 bhp (30 kW; 41 PS) 'Competition' form with Aquaplane head conversion, twin S.U. carburettors, and an improved gearshift linkage.

Inside there was a bench seat back and individual squabs covered in PVC, with leather as an option, and rubber floor covering. A heater was available as an option as was a rev counter and more surprisingly, direction indicators.

In 1956 The Motor magazine tested a Series II and recorded a top speed of 75.3 mph (121.2 km/h), acceleration from 0-60 mph (97 km/h) in 26.9 seconds and a fuel consumption of 35.1 miles per imperial gallon (8.0 L/100 km; 29.2 mpg_-US). The test car cost £713 including taxes.

4/4 Series III

Morgan 4/4 Series III
Overview
Production	1960-1961 58 made
Powertrain
Engine	997 cc Ford Anglia I4

The short-lived Series III was introduced in October 1960 and 58 were built by November 1961 when the Series IV arrived. The chassis was essentially the same as that used on the Series II but the track was increased by 2 inches (50 mm). Hydraulic shock absorbers replaced the old Hartford friction type.

A 39 bhp (29 kW; 40 PS) overhead valve 997 cc Ford Anglia 105E engine and Ford four-speed gearbox were used.

4/4 Series IV

Morgan 4/4 Series IV
Overview
Production	1961-1963 114 made
Powertrain
Engine	1.3 L Ford Straight-4
Dimensions
Wheelbase	96 in (2,438 mm)
Length	150 in (3,810 mm)
Width	56 in (1,422 mm)
Height	48 in (1,219 mm)

The Series IV introduced October 1961 with 114 built by March 1963 had a 62 bhp, 1340 cc, Ford Classic 109E engine and Ford four-speed gearbox. Front 11 in (279 mm) disc brakes were now fitted.

The Motor magazine tested a Series IV in 1962 and found it had a top speed of 80.3 mph (129.2 km/h), acceleration from 0-60 mph (97 km/h) in 18.6 seconds and a touring fuel consumption of 32.0 miles per imperial gallon (8.8 L/100 km; 26.6 mpg_-US). The test car cost £729 including taxes on the home market.

4/4 Series V

Morgan 4/4 Series V
Overview
Production	1963-1968 639 made
Powertrain
Engine	1.5 L Ford Straight-4

The Series V was introduced in February 1963 with 639 built by March 1968.

A 65 bhp, 1498 cc, Ford Cortina 116E engine and Ford four-speed gearbox were used.

4/4 1600

Morgan 4/4 1600
Overview
Production	1968-1993 5448 made
Powertrain
Engine	1.6 L Ford or Fiat Straight-4

The car was further updated in 1968 to become the 1600 with two- and four-seat open bodies available.

Ford Kent Crossflow engine

The 4/4 1600 was introduced in February 1968 fitted with a variety of Ford 1599 cc Kent engines of type 2737E (70 bhp), type 2737GT (95.5 bhp) and type 2265E (95.5 bhp) from 1971 and a Ford four-speed gearbox.

A total of 3513 were built by March 1982.

Fiat Twin-Cam engine

Introduced in November 1981 was a 98 bhp (73 kW; 99 PS) Fiat 1584 cc twin-cam engine and five-speed Fiat gearbox.

96 were built by November 1985.

Ford CVH engine

Introduced in March 1982 with a Ford 1597 cc CVH engine and Ford four-speed gearbox until 1984, then a Ford five-speed gearbox from Ford Sierra. From 1986 steering was changed from the original cam and peg to a Gemmer recirculating ball system.

1652 were built by November 1991.

Ford CVH EFI engine

From November 1991 a 100 bhp (75 kW; 101 PS) Ford 1597 cc CVH engine with electronic fuel injection was used. 187 were built by January 1993, when the 1800 version was introduced.

4/4 1800

Morgan 4/4 1800
Overview
Production	1993-2009
Powertrain
Engine	1,796 cc Zetec R I4 1,798 cc Duratec I4

Ford Zetec engine

Starting in April 1993 the Morgan 4/4 used a 114 bhp (85 kW; 116 PS) Ford 1,796 cc 16-valve Zetec R engine.

Runabout

In 2003 Morgan launched a new entry level model named the Runabout based on the 4/4. It was available in three standard colours only with a standard no-option specification. The Runabout could be recognised by the reduced number of bonnet louvres.

Ford Duratec engine

From 2005 to 2009 the 4/4 sported a 125 bhp (93 kW; 127 PS) Ford Duratec 1,798 cc 16-valve all-alloy engine. On these models the exhaust is on the right side. In January 2006 a "70th Anniversary Special edition" was presented, celebrating 70 years having passed since the introduction of the 4/4. This received black paint and special wheels, similar to those used on the original "flat-rad" 4-4 Morgan. 142 were planned to be made. In spite of seventy years of production, the accumulated figure had not yet reached 10,000 in 2006.

4/4 1.6 Litre (2009-)

Morgan 4/4 1.6 Litre
File:2011 Morgan 4-4 1.6 Litre front.jpg
Overview
Production	2009–present
Powertrain
Engine	1,595 cc Sigma 416 I4
Dimensions
Length	4,010 mm (158 in)
Width	1,630 mm (64 in)
Curb weight	795 kg (1,753 lb)

From 2009 to the present (2013) the Ford Sigma engine used is 1,595 cc and produces 110 bhp (82 kW), enough for a 185 km/h (115 mph) top speed. The engine drives the rear wheels via a Mazda-made five-speed manual gearbox. The bonnet has fewer bonnet louvres, as for the previous "Runabout" entry-level version.

External links

• Morgan Workshop Manual