Mount Bulusan
| Bulusan Volcano | |
|---|---|
| Mount Bulusan | |
Bulusan volcano seen here from the west
|
|
| Highest point | |
| Elevation | Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). [1] |
| Prominence | Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). [2][3] |
| Listing | Ultra |
| Coordinates | Lua error in package.lua at line 80: module 'strict' not found. [1] |
| Geography | |
.svg)
 Bulusan Volcano
Location within the Philippines
|
|
| Location | Luzon |
| Country | Philippines |
| Region | Bicol Region |
| Province | Sorsogon |
| Municipalities | |
| Geology | |
| Mountain type | Stratovolcano |
| Last eruption | May to July 2015 (ongoing) |
Mount Bulusan, or Bulusan Volcano, is the southernmost volcano on Luzon Island in the Republic of the Philippines. It is situated in the province of Sorsogon in the Bicol region, 70 km (43 mi) southeast of Mayon Volcano and approximately 250 km (160 mi) southeast of the Philippine capital of Manila.
It is one of the active volcanoes in the Philippines.
Contents
Physical features
Bulusan is classified by volcanologists as a stratovolcano (or a composite cone) and covers the northeast rim of Irosin caldera that was formed about 40,000 years ago. It has a peak elevation of 1,565 m (5,135 ft) above sea level with a base diameter of 15 km (9.3 mi).
Located around the mountain are four craters and four hot springs. The first crater, called Blackbird Lake, is 20 m (66 ft) in diameter and 15 m (49 ft) deep. The second crater is oval, with dimensions of 60 by 30 m (197 by 98 ft) and 15 m (49 ft). The third crater is about 90 m (300 ft) in diameter and 20 m (66 ft) deep, while the fourth, which is near the northeastern rim opened during the 1981 eruption. There is also a 100-metre (330 ft) fissure measuring 5 to 8 m (16 to 26 ft) wide below this crater.
Its hot springs are San Benon Springs, Mapaso Springs, San Vicente Springs, Masacrot Springs.
Its adjacent volcanic edifices are Mt. Homahan, Mt. Binitacan, Mt. Batuan, Mt. Calungalan, Mt. Calaunan, Mt. Tabon-Tabon, Mt. Juban, and Mt. Jormajan.
Eruptions
Bulusan is generally known for its sudden steam-driven or phreatic explosions. It has erupted 15 times since 1885 and is considered as the 4th most active volcano in the Philippines after Mayon, Taal, and Kanlaon.
Evacuation procedures
There are evacuation procedures in place for parts of the peninsula; the farms nearest the volcano are to be evacuated, and many of the village schools will be closed if it is considered possible that a more destructive eruption could occur.
Recent activities
March - June 2006
The Philippine Institute of Volcanology and Seismology (PHIVOLCS) declared Alert Level 1 on March 19, 2006 after it recorded increased seismic unrest. On June 8, 2006, volcanologists raised the Alert Level to 2 (moderate level of seismic unrest) after it spewed ash. On June 9, the resulting ash cloud damaged a number of houses in the nearby town of Casiguran, 5 kilometers (3.1 mi) north of the volcano, and reached Sorsogon City, about 20 kilometers (12 mi) north of Bulusan.
On June 13, 2006, volcanologists said new craters were created by the mild explosions of Mount Bulusan. Aside from the new craters, two of the volcano's four craters appeared to have merged and cracks were observed on the crater on the western side of the summit. Another eruption took place on April 8, 2007[4]
July – October 2007
Following some signs of volcanic activity, on the morning of July 31, 2007, 9.37 AM (local time), there was a loud explosion described by locals as "like a bomb going off". A cloud of steam and ash shot into the air from Mount Bulusan to a height of 5 kilometers (3.1 mi), drifted and deposited over the surrounding countryside. The eruption lasted for 20 minutes.[5]
On October 4, 2007, two episodes of ash explosions occurred as recorded by the seismic network. The explosions were not visually observed due to thick clouds covering the volcano's summit. The events were recorded as explosion type-earthquakes at 1:34 AM and 1:39 AM. The seismic network recorded 40 volcanic earthquakes and 8 short duration harmonic tremors during the previous 24 hours. Ground deformation surveys along the Inlagadian leveling line at the northeast flank indicated a slight inflation of the volcano's edifice. Field investigation conducted showed trace to light ashfalls affecting barangays San Roque, San Rafael, Sitio Tawog of Porog, Porog proper and Bulusan town proper, all in the municipality of Bulusan.
The October 2007 ash explosions at Bulusan Volcano were preceded by sporadic swarms of small to moderate-sized amplitude earthquakes, which began occurring in the last week of September 2007.[6] Evacuations took place during the July–August episodes of activity. [7]
November 2010
On November 7, 2010, PHIVOLCS recorded increased seismic activity at Bulusan Volcano, 24 hours after the active volcano spewed a 600-meter (2,000 ft) ash column and grayish steam on November 5, 2010. State volcanologists noted that at least 10 volcanic earthquakes and four explosion-type events have been documented subsequent to the emission of ash and steam at 8 a.m. on Saturday (5 November 2010). PHIVOLCS also noted that steaming activity was characterized by strong emission of white steam column that reached a maximum height of 200 meters above the crater rim. It warned the public not to enter the four-kilometer permanent danger zone from the volcano. People residing near the valleys and streams were also advised to be "extra alert" against sediment-laden stream flows in the event of heavy rains.[8] More ash ejection were reported on November 8–9, 2010 with ash fall on areas in Juban and Irosin towns in Sorsogon province. A PHIVOLCS bulletin on November 9, 2010 stated that eight volcanic earthquakes were recorded from the volcano during the past 24 hours and weak to moderate emission of ash explosion was observed. PHIVOLCS also warned residents near valleys and streams against sediment-laden stream flows in the event of heavy and continuous rainfall.[9]
February 2011
After months of little activity, the volcano suddenly erupted and sent a plume of ash 2 kilometers (1.2 mi) high, after water reacted with the hot magma. PHIVOLCS has said such explosions are likely to continue for the coming weeks. Initially, hundreds of nearby residents evacuated on their own, but the government has stepped in to evacuate thousands more, and imposed a 4-kilometer (2.5 mi) travel ban around the crater. They also advised aeroplanes to avoid the immediate perimeter due to ash and debris in the air.[10]
July 2014
In July 13, 2014, during the 24-hour observation period, the seismic network detected thirteen volcanic earthquakes.[11]
May 2015
Mount Bulusan ejected a 250 m (820 ft) ash plume in May 1, 2015 at around 9:46 PM, lasting for 3.5 minutes. The incident is classified as a "minor explosion event" by PHIVOLCS leading to the raising of Alert Level 1 (abnormal activity) for the surrounding area. A second ash explosion lasting for five minutes also occurred on the same day. PHIVOLCS determined the cause of the eruptions to be hydrothermal activity beneath the volcano. People were advised not to enter the 4 km (2.5 mi) Permanent Danger Zone. Further advisories were given to low-flying aircraft against the dangers of sudden phreatic eruptions, and to local residents near rivers and streams in case of lahar flows.[12][13][14] There were also concerns that rains from Typhoon Noul could trigger lahars and mudslides near the mountain.[15] However, after Noul recurved to the north, the threat did not materialize and the evacuees were permitted to return to their homes.[16]
June 2015
On June 16, Mount Bulusan generated two volcanic eruptions with the first one recorded at 11:02 AM which lasted for 10 minutes producing a one kilometer high grayish steam and ash plume and accompanied by rumbling sounds. The second one was recorded at 11:20 AM which lasted for a minute producing only a small ash plume.[17] On June 18, the volcano once again erupted but was not observed visually due to thick clouds covering the summit. Prior to the eruption, rumbling sounds was heard between 5:00 AM to 7:00 AM by residents of the village of Monbon in Irosin town. The next day, June 19, Bulusan erupted yet again at around 2:55 PM producing a 1.5 kilometer high ash plume.[18]
See also
- Bulusan Volcano National Park
- List of erupting volcanoes in the Philippines
- List of potentially active volcanoes in the Philippines
- List of inactive volcanoes in the Philippines
References
- ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ "Philippines Mountains". Peaklist.org. Retrieved 2014-05-03.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Inquirer.com
- ↑ Bulusan Volcano Bulletin
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Bulusan Volcano Shows Increased Seismic Activity | The Manila Bulletin Newspaper Online
- ↑ Bulusan volcano spews more ash | ABS-CBN News | Latest Philippine Headlines, Breaking News, Video, Analysis, Features
- ↑ Thousands flee as Philippine volcano erupts - Yahoo! News
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
 |
Wikimedia Commons has media related to [[commons:Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).|Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).]]. |
