This is a good article. Click here for more information.

New Jersey Route 208

From Infogalactic: the planetary knowledge core
(Redirected from New Jersey Route S4B)
Jump to: navigation, search

Route 208 marker

Route 208
Route information
Maintained by NJDOT
Length: 10.07 mi[1] (16.21 km)
Existed: 1953 (1929 as Route S4B) – present
Major junctions
South end: Route 4 in Fair Lawn
  CR 507 in Fair Lawn
CR 502 in Franklin Lakes
North end: I-287 in Oakland
Highway system
US 206 I-278

Route 208 is a state highway in the northern part of New Jersey in the United States. It runs 10.07 miles (16.21 km) from an interchange with Route 4 and County Route 79 (Saddle River Road) in Fair Lawn northwest to an interchange with Interstate 287 in Oakland. The route runs through suburban areas of Bergen and Passaic counties as four- to six-lane divided highway. It is constructed like a freeway, as intersections with cross roads are controlled by interchanges, but is not a controlled access road as several driveways exist. The route runs through the communities of Fair Lawn, Glen Rock, Hawthorne, Wyckoff, and Franklin Lakes along the way, interchanging with County Route 507 in Fair Lawn and County Route 502 in Franklin Lakes.

What is now Route 208 was initially planned as Route S4B in 1929, a spur of Route 4 that was to run from Fair Lawn northwest to the New York border in Greenwood Lake, where it would eventually connect to New York State Route 208. This route replaced what was planned as a part of Route 3 in 1927 between Paterson and Greenwood Lake. By the time the route was renumbered to Route 208 in 1953 to match NY 208, only a portion of the route in Fair Lawn from Route 4 to Maple Avenue had been built. Route 208 was completed west to U.S. Route 202 in Oakland by 1960 as a two-lane undivided road; it would be built into its present configuration in later years. A Route 208 freeway was planned across the Ramapo Mountains from Oakland to connect to a proposed NY 208 freeway at Greenwood Lake; however, it was never built. After Interstate 287 was extended from Montville to the New York border in 1993, it took over the alignment of Route 208 between U.S. Route 202 and the route’s current northern terminus. The last traffic signal along Route 208 at McBride Avenue was removed in 1997 and the interchange with Route 4 and Saddle River Road was reconstructed in 2002.

Route description

A four lane highway with a center concrete barrier containing lampposts that is surrounded by trees and has power lines running along its right side. A green overhead sign in the distance reads Morlot Ave. Fair Lawn 1/4 mile.
Northbound Route 208 approaching the Morlot Avenue interchange in Fair Lawn

Route 208 (dedicated as the World War II Veterans Memorial Highway) is constructed like a freeway, however, at no point does it meet the standard of controlled access. Several streets and private driveways abut the road throughout its length, with right-in/right-out access; however, no traffic may cross the highway at grade. Traffic moves in at least two lanes in each direction for the road's entire length of 10.07 miles (16.21 km), widening briefly to three lanes next to a commercial area in Fair Lawn and near its northern terminus.[1]

The road originates at an interchange with Route 4 in Fair Lawn, Bergen County that also includes ramps for County Route 79 (Saddle River Road), heading to the west near residential areas.[1][2] Shortly after beginning, a ramp from southbound Route 208 provides access via Virginia Drive to westbound Route 4.[2] The next exit is a partial interchange with County Route 78 (Morlot Avenue), followed by a full interchange with Plaza Road. Past the latter, the route passes over New Jersey Transit’s Bergen County Line and comes to a southbound exit and entrance with Berdan Avenue.[1] From here, the road turns to the northwest, passing near more neighborhoods before coming to an interchange with County Route 76 (Fair Lawn Avenue). Past this interchange, the northbound direction of Route 208 widens to three lanes and it continues into commercial areas, with some driveways along the road and an intersection with McBride Avenue.[1][2] At this point, the highway passes an industrial park, including a Nabisco plant on the right side.[2] A short distance later, the road reaches the interchange with County Route 507 (Maple Avenue) and County Route 127 (Harristown Road). Past this interchange, the road enters Glen Rock and has a northbound exit and entrance with De Boer Drive before crossing over the New Jersey Transit Main Line.[1] Past the railroad crossing, Route 208 heads through wooded residential areas prior to a northbound interchange with County Route 653 (Lincoln Avenue), where it enters Hawthorne, Passaic County.[1][2] County Route 653 and Route 208 are connected by a short segment of County Route 664 (Rea Avenue).[1]

Route 208 southbound approaching Goffle Road interchange in Hawthorne, with the New York City skyline visible in the distance

The highway has turnoffs in each direction for Utter Avenue before passing beneath the New York, Susquehanna and Western Railway track prior the interchange with County Route 659 (Goffle Road).[1] Past here, the highway turns north and climbs a hill, passing the Hawthorne Gospel Church on the right.[2] It re-enters Bergen County in Wyckoff, just before the Grandview Avenue interchange.[1] From here, Route 208 largely resembles a wooded parkway, although there are a few driveways off the road.[2] The road turns northwest and interchanges with County Route 93 (Cedar Hill Avenue) before passing near more homes and coming to an interchange with County Route S93 (Russell Avenue).[1][2] The road continues into Franklin Lakes and interchanges with County Route 502 (Ewing Avenue) before turning west-northwest and coming to an exit for County Route S89 (Summit Avenue).[1] Past Summit Avenue, the road has two interchanges providing access to the Becton Dickinson headquarters campus, where the road carries three lanes in each direction.[1][2] It narrows back to two lanes in each direction before coming to the interchange with County Route 117 (Colonial Road) and County Route 89 (High Mountain Road). The final exit heading northbound is for Interstate 287 north, an interchange that includes another crossing of the New York, Susquehanna and Western Railway. After passing the exit, Route 208 northbound merges into Interstate 287 southbound at the Franklin Lakes and Oakland border.[1]

History

File:NJ S4B (cutout).svg
Route S4B (1929-1953)

NJ 208 was first plotted in 1929 as Route S4B, a spur off Route 4 that was to run from Fair Lawn northwest through Ringwood, and West Milford to the New York border near Greenwood Lake.[3] This route was to replace what was to be a portion of Route 3 between Paterson and the New York border that was designated in the 1927 New Jersey state highway renumbering.[4][5] The road was projected to continue into New York and continue through Sterling Forest and Monroe, New York, where it would join New York's Route 208 at its intersection with New York State Route 17. By 1953, the portion of Route S4B between Route 4 and Maple Avenue in Fair Lawn was completed; that same year, it was renumbered to Route 208 in order to match NY 208.[6][7] By 1960, the road was extended to a northern terminus at U.S. Route 202 and West Oakland Avenue in Oakland, where traffic could exit and continue over Skyline Drive to Ringwood. When first constructed, this portion of Route 208 was a two-lane undivided road.[8] By 1969, the portion between Maple Avenue and Goffle Road was widened to a divided highway with the entire route built into a multi-lane divided highway by the 1980s.[9][10]

An overhead view of a four-lane divided freeway running through a wooded area. An interchange is seen in the distance.
Route 208 passing through Hawthorne, New Jersey.

Meanwhile, plans still existed to build Route 208 past Oakland to the New York border. Passaic County called for a divided highway to bypass Skyline Drive, and in 1967 the New Jersey Department of Transportation proposed a Route 208 freeway through the Ramapo Mountains that would run from Oakland to the New York border in Greenwood Lake, where it would connect to a proposed NY 208 freeway (called the Orange Expressway) that would continue north to Interstate 84 in Maybrook, New York.[11] This freeway, which was to cost $66.3 million, was to improve traffic in the resort areas of the Ramapo Mountains and also connect to the proposed Route 94 freeway leading to Warren County and the proposed Route 178 freeway leading to Morris County.[11][12] In 1975, this proposed freeway was recommended by the Tri-State Regional Planning Commission to be completed by 2000. However, it was never built.[13]

When Interstate 287 was extended from Montville to the New York border in 1993, it took over the alignment of Route 208 between U.S. Route 202 and the current northern terminus of Route 208. In 1995, the last traffic signal along Route 208 at McBride Avenue was turned off.[14] In 2002, construction was completed on a $32 million project that improved the interchange with Route 4 in Fair Lawn. This interchange saw improvements of the ramps and bridges, including the Route 208 bridge over Saddle River Road.[15] The Route 208 freeway, like many others in New Jersey, once had solar powered emergency call boxes every 1.0 mile (1.6 km); however with the advent of cell phones the usage of these call boxes became extremely limited. To save on maintenance costs, the NJDOT removed these call boxes in 2005.[16]

Exit list

County Location mi[1] km Destinations Notes
Bergen Fair Lawn 0.00 0.00 Route 4 east – Fort Lee, New York City Southbound exit and northbound entrance; southern terminus
0.07 0.113 Saddle River Road (CR 79) to G.S. Parkway south Southbound access to southbound CR 79 and northbound access to northbound CR 79
0.25 0.40 To Route 4 west (Virginia Drive) Southbound exit and entrance
0.94 1.51 Morlot Avenue (CR 78) – Fair Lawn Northbound exit only
1.22 1.96 Plaza Road – Fair Lawn
1.50 2.41 Berdan Avenue Southbound exit and entrance
1.83 2.95 Fair Lawn Avenue (CR 76)
2.44 3.93 McBride Avenue Northbound exit and entrance
2.88 4.63 CR 507 (Maple Avenue) – Glen Rock, Ridgewood, Paterson, Hawthorne
Glen Rock 3.17 5.10 De Boer Drive Northbound exit and entrance
Passaic Hawthorne 3.54 5.70 Lincoln Avenue (CR 653) – Ridgewood Northbound exit and entrance, access provided by Rea Avenue (CR 664)
3.76 6.05 Utter Avenue
4.40 7.08 Goffle Road (CR 659) – Midland Park, Ridgewood, Hawthorne, Paterson
Bergen Wyckoff 5.32 8.56 Grandview Avenue – Wyckoff
5.97 9.61 Cedar Hill Avenue (CR 93) – Wyckoff
6.93 11.15 Russell Avenue (CR S-93) – Wyckoff
Franklin Lakes 7.87 12.67 CR 502 (Ewing Avenue) – Franklin Lakes
8.48 13.65 Summit Avenue (CR S-89) – Franklin Lakes
8.82 14.19 Becton Dickinson headquarters Southbound exit, northbound exit and entrance
9.14 14.71 Becton Dickinson headquarters Northbound and southbound entrance
9.45 15.21 High Mountain Road (CR 89) / Colonial Road (CR 117) – Franklin Lakes
9.62 15.48 I-287 north to I-87 – Mahwah, New York Thruway Northbound exit
Oakland 10.07 16.21 I-287 south – Oakland, Morristown Northbound exit and southbound entrance; northern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Lua error in package.lua at line 80: module 'strict' not found.
  3. State of New Jersey, Laws of 1929, Chapter 126.
  4. State of New Jersey, Laws of 1927, Chapter 319.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.0 11.1 Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".