Otira Tunnel

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Otira Tunnel
Otira Tunnel (Arthur's Pass), ca 1910.jpg
Otira Tunnel during construction, ca 1910
Overview
Line Midland Line
Location Southern Alps, South Island, New Zealand
Coordinates North (West coast) portal: Lua error in package.lua at line 80: module 'strict' not found.
East (Canterbury) portal: Lua error in package.lua at line 80: module 'strict' not found.
Start Otira, West Coast
End Arthur's Pass Canterbury
Operation
Opened 4 August 1923
Owner ONTRACK
Operator KiwiRail, Tranz Scenic
Character Single bore rail tunnel
Technical
Line length 8566 m
Track gauge 1067 mm (3' 6")

The Otira Tunnel is a railway tunnel on the Midland Line in the South Island of New Zealand, between Otira and Arthur's Pass. It runs under the Southern Alps from Arthur's Pass to Otira - a length of over 8.5 kilometres (5.3 mi). The gradient is mainly 1 in 33, and the Otira end of the tunnel is over 250 m (820 ft) lower than the Arthur's Pass end. Construction commenced in 1907 and a "breakthrough" celebration was held on 21 August 1918 by the Minister of Public Works Sir William Fraser. When the tunnel opened on 4 August 1923, it was the seventh longest tunnel in the world and the longest in the British Empire.[1]

The Midland Railway Company investigated options to a long tunnel; but a line over the pass with gradients of 1 in 50 on both sides was not practical. Other options for a line over the pass were a cable-hauled system or a line of 1 in 15 gradient using either the Fell system or a rack railway using the Abt system (or even a S-shaped tunnel under Mount Rolleston). However the government did not favour the Fell system as used on the Rimutaka Incline which was expensive to operate. After taking over the line the government decided in 1900 on a 10 km long straight tunnel with a gradient of 1 in 37, but after expert advice opted two years later for an 8.55 km tunnel at the slightly steeper gradient of 1 in 33.[2]

A contract to build the tunnel in 5 years was let to the engineering firm of John McLean and Sons who started at the Otira end in 1908, using the “drill and blast” method. With progress difficult and slow McLeans asked to be relieved from the contract in 1912, and were financially ruined (the tunnel cost over twice the contract price of £599,794 ($1,200,000). The government could find no other tenderers, so the work was taken over by the Public Works Department. The government considered halting construction in World War I, but the Imperial Government requested that work should continue in case the German navy blockaded the West Coast ports used for coal shipment. Breakthrough was on 20 July 1918, but concrete lining took a further three years, and then two more years before the tunnel opened. There were eight fatalities during construction.[3]

The tunnel dimensions were 4.72 metres (15.5 ft) high and 4.27 metres (14 ft) wide at rail level, increasing to 4.57 meters (15 ft) at the widest point. Because of its length and gradient, gases such as carbon dioxide and carbon monoxide could easily build up, potentially making the tunnel both unhealthy for the train's occupants and unworkable with steam engines. Thus, the tunnel was electrified with a 1500V DC overhead system. A small coal-fired power station was built near Otira to provide electricity until 1941, when it was replaced by a connection to the national grid. The locomotives used were the EO class, then from 1968 the EA class.

Because of the increasing age of the electrification and the availability of upgraded DX Class diesel locomotives, the electrification was decommissioned in 1997 and the equipment removed. This marked the end of electrification in the South Island.

TranzAlpine and Otira Tunnel from Arthurs's Pass station.

To overcome the fume problem, a combination of a door and fans is used, similar to that used in the Cascade Tunnel in the USA, which was also once electrified. After a train enters the tunnel from the Otira end the door closes off the entrance, and a large fan extracts the fumes behind the train. Once the fumes have been extracted, the door is reopened. Because of the fumes, the TranzAlpine's observation cars are closed for the trip through the tunnel.[4]

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  1. Wright 2009, p. 29.
  2. Wright 2009, pp. 17,21.
  3. Wright 2009, pp. 22,24,25.
  4. Lua error in package.lua at line 80: module 'strict' not found.

External links