Paksat-1R

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
PakSat-1R
Mission type Geosynchronous and Communication
Operator Pakistan Space Research Commission
COSPAR ID 2011-042A
SATCAT № 37779
Mission duration 12 years
Spacecraft properties
Bus DFH-4
Manufacturer Suparco
CASC
Launch mass 5,115 kilograms (11,277 lb)[1]
Start of mission
Launch date 11 August 2011, 16:15:04 (2011-08-11UTC16:15:04Z) UTC[2]
Rocket Chang Zheng 3B
Launch site Xichang LC-2
Entered service 2011
Orbital parameters
Reference system Geocentric
Regime Geostationary
Longitude 38° east[3]
Perigee 35,778 kilometres (22,231 mi)
Apogee 35,805 kilometres (22,248 mi)
Inclination 0.03 degrees
Period 23.93 hours
Epoch 24 December 2013, 23:02:29 UTC[4]
Transponders
Band 12 C-band
18 Ku-band

PakSat-1R (or PakSat-1 Replacement) is an advanced geosynchronous and communications satellite that is manufactured and operated by the Space and Upper Atmosphere Research Commission (Suparco), an executive space authority of the government of Pakistan.[5]

The PakSat-1R was developed and built as ageostationary telecommunications satellite and was launched from Xichang, China, at 16:15 UTC on 11 August 2011.[2] Launched on the Long March 3B rocket, the satellite has a design life of 15 years with initial goals to provide broadband internet access, digital television broadcasting, remote and rural telephony, emergency communications, tele-education and tele-medicine services across South and Central Asia, Eastern Europe, East Africa and the Far East. The satellite successfully took over the operations of its predecessor, the PakSat-1E satellite leased by Pakistan, in geostationary orbit at 38° East.[6][7]

History

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main articles: Space and Upper Atmosphere Research Commission § History, and PAKSAT-1

In December 2001, the Suparco negotiated to lease the Palapa-C1 satellite and designated it as PakSat-1E in an attempt to avert the orbital slot crises. It was acquired after an anomaly in the electrical system of the satellite on 24 November 1998. A module for controlling the hydro accumulators had failed and an American contractor, Hughes Global Services (HGS), managed to develop a strategy that allowed the continued use of the satellite in geostationary orbit. The satellite was eventually leased by Pakistan as PakSat-1E at 38°East in geostationary orbit and had been active since April 2004. During this time, the Suparco began developing the geosynchronous satellite to replacing the aging PakSat-1E as part of the new space policy announced by the Government of Pakistan in 2008.

Prototype

In 2008, a prototype of PAKSAT-IR was developed by Suparco at its Satellite Research and Development Centre (SRDC) in Lahore.[8] The project was aimed to enhance the knowledge and technical expertise of young scientists and engineers about communications satellite engineering.[8] The PakSat-1R prototype has three C-band Transponders as the communication payload. All the subsystems have been designed and developed locally in Pakistan.[8] System integration and testing have also been performed. SUPARCO reported that the project was completed in three years.[8]

Manufacture and launch

The PakSat-1R was mostly designed and developed by the Suparco in China, with financial funding came from the Chinese government.[9] Before launching the satellite spent around 18 days undergoing laboratory tests in China.[10] The PakSat-1R was launched on 11 August 2011 from the Xichang Satellite Launch Center in Sichuan Province, China, by a Long March 3B/E (Chang Zheng-3B/E) launch vehicle. In 2010, China provided loans for setting up communication facilities at the SUPARCO Satellite Ground Station.[11]

Specifications

The Paksat-1R satellite is based on the DFH-4 platform, with a launch mass around 5,200 kg. The satellite will be positioned at 38.0 degrees East, replacing the Paksat-1 (23779 1996-006A), which was launched as Palapa-C on January 31, 1996, by an Atlas-IIAS (AC-126) from Cape Canaveral’s LC-36B launch complex. Paksat-1R was manufactured by the China Great Wall Industry Corporation (CGWIC), after being ordered in October 15, 2008 – with a contract signed with the China Great Wall Industry Corporation (CGWIC). The PakSat-1R contract was the third communications satellite contract signed by China’s space industry with international customers. It is also China’s first satellite in-orbit delivery contract signed with an Asian customer.

The satellite will support all conventional and modern Fixed Satellite Service (FSS) applications, with a total of up to 30 transponders: 18 in Ku-band and 12 in C-band. To ensure high degree of reliability/availability of the system, two fully redundant Satellite Ground Control Stations (SGCS) were established in Karachi and Lahore, one to act as the Main and the other as Backup respectively.

The DFH-4 (DongFangHong-4) platform is a large telecommunications satellite platform – a new generation of hardware based on high output power and communication capacity, ranking alongside international advanced satellite platforms. The applications for the DFH-4 platform aren’t limited to high capacity broadcast communication satellites and can be used to tracking and data relay satellites, regional mobile communication satellites, etc. The platform comprises propulsion module, service module and solar array. It has a payload capacity of 588 kg and an output power of 10.5 kW by the end of its lifetime. Its design lifetime is 15 years and its reliability by the end of its lifetime is more than 0.78.

Based on versatility, inheritance, expandability and promptness principles and mature technology, the platform will meet the needs of international and domestic large communication satellite markets. The satellite is equipped with three receiver antennas and two transmission antennas. It can support the transmission of 150-200 TV programs simultaneously to ground users using a 0.45m antenna device.[12]

Launch

PAKSAT-1R was launched at 2117 hours on 11 August 2011 aboard China’s Long March 3B (CZ-3B) Satellite Launch Vehicle from the Xichang Satellite Launch Centre in China's Sichuan Province.[7]

The launch was witnessed by, among others, Pakistan's Secretary Defence, Lt. Gen. Syed Athar Ali (R), Secretary Foreign Affairs, Salman Bashir, Director General, Strategic Plans Division, Lt. Gen. Khalid Ahmed Kidwai (R) and the Ambassador of Pakistan to China, Muhammad Masood Khan.[7]

Reception

The reception perceived in Pakistan science community and in the country was generally positive.[13] However, leading scientists in Pakistan gave criticism to Suparco for not able to launch the satellite from Pakistan's Flight Space Center and questioned were raised whether space programme is on the right track.[13] In a press release, Suparco dismissed the concerns and maintained that the program is being directed on its right direction.[13] Commenting on the launch of the satellite, The Tribune wrote, what Space and Upper Atmosphere Research Commission (Suparco) has achieved today could have been done 30 years ago.[13]

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ http://italk.pk/post/2011/08/12/Pakistan’s-first-Communications-Satellite-PAKSAT-1R-launched.aspx
  7. ↑ 7.0 7.1 7.2 http://www.dawn.com/2011/08/11/pakistans-first-communications-satellite-paksat-1r-launched.html
  8. ↑ 8.0 8.1 8.2 8.3 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 13.3 Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Paksat-1R&oldid=722810001"