This is a good article. Click here for more information.

Pill railway station

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pill
265px
The site of the former Pill railway station in 2009, looking west towards Portishead.
Location
Place Pill
Area North Somerset
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Grid reference ST524760
Operations
Original company Bristol and Portishead Pier and Railway
Pre-grouping Great Western Railway
Post-grouping Great Western Railway
Platforms 2
History
18 April 1867 Opened
10 June 1963 Closed to goods traffic
7 September 1964 Closed to passengers
2019 Due to be reopened
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z
UK Railways portal

Pill railway station was a railway station on the Portishead Branch Line, 7.8 miles (12.6 km) west of Bristol Temple Meads, serving the village of Pill in North Somerset, England. The station was opened by the Bristol and Portishead Pier and Railway Company on 18 April 1867. It had two platforms, on either side of a passing loop, with a goods yard and signal box later additions. Services increased until the 1930s, at which point a half-hourly service operated. However the Portishead Branch was recommended for closure by the Beeching report, and the station was closed on 7 September 1964, although the line saw freight traffic until 1981. Regular freight trains through the station began to run again in 2002 when Royal Portbury Dock was connected to the rail network.

The station is due to be reopened to passenger traffic in 2019 as part of MetroWest, a scheme to increase rail services in the Bristol area. The new station will have a single platform, an accessible footbridge and a car park, with trains running between Portishead and Bristol.

History

File:Pill Viaduct - geograph.org.uk - 92071.jpg
A train crosses the Pill Viaduct in 1960. This is a service from Portishead, which has just left Pill.

Pill railway station was opened on 18 April 1867 by the Bristol and Portishead Pier and Railway Company, when services began on their line from the Bristol and Exeter Railway at Portishead Junction[note 1] to a pier on the Severn Estuary at Portishead. The station served the village of Pill on the south bank of the River Avon. The line was built as 7 ft (2,134 mm) broad-gauge, and was largely single track.[1][2] The station was sited in a cutting close to the old centre of Pill, 3 miles 73 chains (6.3 km) from the line's terminus at Portishead,[note 2] 7 miles 61 chains (12.5 km) from Bristol Temple Meads and 126 miles 12 chains (203.0 km) from the Great Western Railway's terminus at London Paddington.[3][4][note 3] To the east, the railway passed through the village and crossed a valley on the brick-built Pill Viaduct, while to the west the line was largely through flat, open countryside.[1][5] The station was initially the second along the line from Portishead Junction, after Clifton Bridge and before Portbury.[1]

The station at Pill was aligned roughly north-west/south-east, with the line bridged to the east by Station Road and Myrtle Hill. There were two platforms, separated by two running lines, forming a passing loop. The southern "down" platform was for trains towards Portishead, the northern "up" platform for trains towards Bristol.[2][5] Each platform was provided with a brick shelter and steps up to Station Road. The station building was sited on Station Road, west of the platforms.[6]

There were initially six trains per day in each direction on weekdays and one on Sundays, operated by the Bristol and Exeter Railway. The Great Western took over the Bristol and Exeter in 1876, and in 1884 took over ownership of the Bristol and Portishead. Services increased to nine trains per day on weekdays by 1889.[1][6][7][8](p40) The line was relaid as 4 ft 8 12 in (1,435 mm) standard gauge in 1880, coinciding with a lengthening of the platforms, and by 1909 there were 13 trains per day on weekdays and two trains on Sundays.[6][7]

The double track loop through the station was extended at both ends in March 1912, with the platforms also extended. A small goods yard and coal depot was built at the north-west end of the station at the same time.[2][6][7] A signal box was built on the southern platform at the end of the First World War.[2] By 1929, services had increased to 21 trains per day on weekdays and eight per day on Sundays.[6] This allowed a train every half-hour, with one train per hour running to Bristol Temple Meads and the other terminating at Ashton Gate.[1] Passenger traffic was mainly commuters, to both Bristol and Portishead, as well as people who wished to use the Pill ferry across the river to Shirehampton. During the Second World War, many evacuees from Bristol commutered into the city from Pill. The station staff at this time consisted of a station master, two porters and two female signallers.[2]

When the railways were nationalised in 1948, Pill came under the aegis of the Western Region of British Railways. Passenger services had reduced by 1949 to 13 trains per day on weekdays and seven on Sundays.[6] In 1963 the Beeching report suggested the complete withdrawal of services along the line as a cost-saving measure, and so goods services at Pill were ended on 10 June 1963; with the station closing completely on 7 September 1964.[1][2] In the final year of operation, there were only six trains on weekdays and none on Sundays.[6] Freight trains continued to pass through the station, but their number decreased over time, and the line fell out of regular use after 30 March 1981. The line however was kept intact by British Rail, with occasional freight trains, and in 2002 a single track was relaid to allow rail access to Royal Portbury Dock, which brought regular freight traffic.[1][6] At this time remnants of both platforms could be seen and the station buildings were in commercial use.[2]


Preceding station Historical railways Following station
Clifton Bridge[note 4]
(Line open, station closed)
  Bristol and Exeter Railway
Portishead Railway
(1867–1876)
  Portbury
(Line and station closed)
  Great Western Railway
Portishead Railway
(1876–1918)
 
  Great Western Railway
Portishead Railway
(1918–1923)
  Portbury Shipyard
(Line and station closed)
  Great Western Railway
Portishead Railway
(1923–1926)
  Portbury
(Line and station closed)
Ham Green Halt
(Line open, station closed)
  Great Western Railway
Portishead Railway
(1926–1947)
 
  Western Region of British Railways
Portishead Railway
(1948–1962)
 
  Western Region of British Railways
Portishead Railway
(1962–1964)
  Portishead
(Line and station closed)

Future

File:Pill railway station proposal.jpg
A computer rendering of how a reopened Pill railway station would look, as seen from the south.

The Portishead Branch Line is to be reopened as part of the MetroWest scheme, a rail transport plan which aims to enhance transport capacity in the Bristol area.[10][11][12] The scheme was given the go-ahead in July 2012 as part of the City Deal, whereby local councils would be given greater control over money by the government.[12] There had been calls for the line to reopen, primarily due to traffic congestion on the A369, which is the only route from Portishead to Bristol.[13] A consultation on the reopening plans was held between 22 June and 3 August 2015 to gather views from the community and stakeholders before moving on to detailed designs. The detailed proposals will be subject to a second consultation before the plans are finalised. Due to the additional capital costs, the line will not be electrified, however the design will include passive provision for future electrification.[14]

As part of the works, Pill station will be reopened. Trains both to and from Portishead will use the southern platform, which will be resurfaced and provided with a waiting shelter, lighting, passenger information displays and audible announcements.[14] The northern platform, adjacent to the current single track line to Royal Portbury Dock, will not be reinstated, however the track will be retained for freight trains.[7][14] The two tracks will have a junction east of the station.[14]

Initial plans for the station were for access to be from Monmouth Road, which runs parallel to the railway, north of the line. There was to be a fully accessible footbridge across the line, with both ramp and stairs, as well as a pedestrian crossing across Monmouth Road and a lit 50-space car park on the old goods yard at the eastern end of Monmouth Road. The very end of the goods yard would be maintained for Network Rail access.[14][15] These plans were changed following an agreement to acquire a property on Station Road. The new plans have the entrance to be on Station Road, at the east end of the site, meaning there would be no need for a footbridge. There would be disabled parking and a pick up/drop off point adjacent to the entrance, although the exact design of this area is still under consideration.[16] Noise mitigation options are to be investigated and there will be improvements to local footpaths.[14] The line is due to reopen in 2020.[17]

It is expected that reopening the station will result in reduced car usage to and from Pill and the surrounding villages. Most station users will walk to the station, with the next largest share being car drivers and car passengers being dropped off, followed by cyclists and bus users. Some parking restrictions are proposed to prevent rail users parking on the local streets, which are narrow and not suitable for widening.[14]

Trains along the reopened line will operate between Portishead and Bristol Temple Meads, with two trains per hour in each direction. Services would call at Pill and Parson Street, with aspirations to also call at Bedminster and a reopened Ashton Gate. Trains could also be extended on to the Severn Beach Line. The trains used will be diesel multiple units, likely three carriages long. The line will be operated as part of the Greater Western passenger franchise. Great Western Railway, a subsidiary of FirstGroup, currently operate the Greater Western franchise, however their contract expires in early 2019, before services to Portishead are due to start.[14][19][20]

Preceding station Future services Following station
Parson Street   Greater Western franchise
Portishead Branch Line
  Portishead

See also

Notes

  1. The junction between the Bristol to Exeter Line and Portishead Railway was known as Portishead Junction until 1932, after which it was known as Parson Street Junction.[1]
  2. The location of the terminal pier is an estimate.[3]
  3. Railways in the United Kingdom are, for historical reasons, measured in miles and chains. There are 80 chains to the mile.
  4. Clifton Bridge was known as Rownham from 1891 to 1910.[9]

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 7.2 7.3 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.[refnote 1]
  20. Lua error in package.lua at line 80: module 'strict' not found.[refnote 1]

Notes to references:

  1. 1.0 1.1 Note that these references refer to First Great Western, which was rebranded as Great Western Railway in 2015.[18]

External links