Hardware virtualization

From Infogalactic: the planetary knowledge core
(Redirected from Platform virtualization)
Jump to: navigation, search


Computer hardware virtualization is the virtualization of computers as complete hardware platforms, certain logical abstractions of their componentry, or only the functionality required to run various operating systems. Virtualization hides the physical characteristics of a computing platform from the users, presenting instead another abstract computing platform.[1][2] At its origins, the software that controlled virtualization was called a "control program", but the terms "hypervisor" or "virtual machine monitor" became preferred over time.[3]

Concept

The term "virtualization" was coined in the 1960s to refer to a virtual machine (sometimes called "pseudo machine"), a term which itself dates from the experimental IBM M44/44X system.[citation needed] The creation and management of virtual machines has been called "platform virtualization", or "server virtualization", more recently.

Platform virtualization is performed on a given hardware platform by host software (a control program), which creates a simulated computer environment, a virtual machine (VM), for its guest software. The guest software is not limited to user applications; many hosts allow the execution of complete operating systems. The guest software executes as if it were running directly on the physical hardware, with several notable caveats. Access to physical system resources (such as the network access, display, keyboard, and disk storage) is generally managed at a more restrictive level than the host processor and system-memory. Guests are often restricted from accessing specific peripheral devices, or may be limited to a subset of the device's native capabilities, depending on the hardware access policy implemented by the virtualization host.

Virtualization often exacts performance penalties, both in resources required to run the hypervisor, and as well as in reduced performance on the virtual machine compared to running native on the physical machine.

Reasons for virtualization

  • In the case of server consolidation, many small physical servers are replaced by one larger physical server to increase the utilization of costly hardware resources such as CPU. Although hardware is consolidated, typically OSs are not. Instead, each OS running on a physical server becomes converted to a distinct OS running inside a virtual machine. The large server can "host" many such "guest" virtual machines. This is known as Physical-to-Virtual (P2V) transformation.
  • Consolidating servers can also have the added benefit of reducing energy consumption. A typical server runs at 425 W[4] and VMware estimates an average server consolidation ratio of 10:1.[5]
  • A virtual machine can be more easily controlled and inspected from outside than a physical one, and its configuration is more flexible. This is very useful in kernel development and for teaching operating system courses.[6]
  • A new virtual machine can be provisioned as needed without the need for an up-front hardware purchase.
  • A virtual machine can easily be relocated from one physical machine to another as needed. For example, a salesperson going to a customer can copy a virtual machine with the demonstration software to his laptop, without the need to transport the physical computer. Likewise, an error inside a virtual machine does not harm the host system, so there is no risk of breaking down the OS on the laptop.
  • Because of the easy relocation, virtual machines can be used in disaster recovery scenarios.

However, when multiple VMs are concurrently running on the same physical host, each VM may exhibit a varying and unstable performance, which highly depends on the workload imposed on the system by other VMs, unless proper techniques are used for temporal isolation among virtual machines.

There are several approaches to platform virtualization.

Examples of virtualization scenarios:

  • Running one or more applications that are not supported by the host OS: A virtual machine running the required guest OS could allow the desired applications to be run, without altering the host OS.
  • Evaluating an alternate operating system: The new OS could be run within a VM, without altering the host OS.
  • Server virtualization: Multiple virtual servers could be run on a single physical server, in order to more fully utilize the hardware resources of the physical server.
  • Duplicating specific environments: A virtual machine could, depending on the virtualization software used, be duplicated and installed on multiple hosts, or restored to a previously backed-up system state.
  • Creating a protected environment: if a guest OS running on a VM becomes damaged in a way that is difficult to repair, such as may occur when studying malware or installing badly behaved software, the VM may simply be discarded without harm to the host system, and a clean copy used next time.

Full virtualization

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Logical diagram of full virtualization.

In full virtualization, the virtual machine simulates enough hardware to allow an unmodified "guest" OS (one designed for the same instruction set) to be run in isolation. This approach was pioneered in 1966 with the IBM CP-40 and CP-67, predecessors of the VM family.

Examples outside the mainframe field include Parallels Workstation, Parallels Desktop for Mac, VirtualBox, Virtual Iron, Oracle VM, Virtual PC, Virtual Server, Hyper-V, VMware Workstation, VMware Server (discontinued, formerly called GSX Server), VMware ESXi, QEMU, Adeos, Mac-on-Linux, Win4BSD, Win4Lin Pro, and Egenera vBlade technology.

Hardware-assisted virtualization

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In hardware-assisted virtualization, the hardware provides architectural support that facilitates building a virtual machine monitor and allows guest OSes to be run in isolation.[7] Hardware-assisted virtualization was first introduced on the IBM System/370 in 1972, for use with VM/370, the first virtual machine operating system.

In 2005 and 2006, Intel and AMD provided additional hardware to support virtualization. Sun Microsystems (now Oracle Corporation) added similar features in their UltraSPARC T-Series processors in 2005. Examples of virtualization platforms adapted to such hardware include KVM, VMware Workstation, VMware Fusion, Hyper-V, Windows Virtual PC, Xen, Parallels Desktop for Mac, Oracle VM Server for SPARC, VirtualBox and Parallels Workstation.

In 2006, first-generation 32- and 64-bit x86 hardware support was found to rarely offer performance advantages over software virtualization.[8]

Partial virtualization

Lua error in package.lua at line 80: module 'strict' not found.

In partial virtualization, including address space virtualization, the virtual machine simulates multiple instances of much of an underlying hardware environment, particularly address spaces.[clarification needed] Usually, this means that entire operating systems cannot run in the virtual machine—​​which would be the sign of full virtualization​​but that many applications can run. A key form of partial virtualization is address space virtualization, in which each virtual machine consists of an independent address space. This capability requires address relocation hardware, and has been present in most practical examples of partial virtualization.[citation needed]

Partial virtualization was an important historical milestone on the way to full virtualization. It was used in the first-generation time-sharing system CTSS, in the IBM M44/44X experimental paging system, and arguably systems like MVS and the Commodore 64 (a couple of 'task switch' programs).[dubious ][citation needed] The term could also be used to describe any operating system that provides separate address spaces for individual users or processes, including many that today would not be considered virtual machine systems. Experience with partial virtualization, and its limitations, led to the creation of the first full virtualization system (IBM's CP-40, the first iteration of CP/CMS which would eventually become IBM's VM family). (Many more recent systems, such as Microsoft Windows and Linux, as well as the remaining categories below, also use this basic approach.[dubious ][citation needed])

Partial virtualization is significantly easier to implement than full virtualization. It has often provided useful, robust virtual machines, capable of supporting important applications. Partial virtualization has proven highly successful for sharing computer resources among multiple users.[citation needed]

However, in comparison with full virtualization, its drawback is in situations requiring backward compatibility or portability. It can be hard to anticipate precisely which features have been used by a given application. If certain hardware features are not simulated, then any software using those features will fail.

Paravirtualization

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In paravirtualization, the virtual machine does not necessarily simulate hardware, but instead (or in addition) offers a special API that can only be used by modifying[clarification needed] the "guest" OS. For this to be possible, the "guest" OS's source code must be available. If the source code is available, it is sufficient to replace sensitive instructions with calls to VMM APIs (e.g.: "cli" with "vm_handle_cli()"), then re-compile the OS and use the new binaries. This system call to the hypervisor is called a "hypercall" in TRANGO and Xen; it is implemented via a DIAG ("diagnose") hardware instruction in IBM's CMS under VM[clarification needed] (which was the origin of the term hypervisor). Examples include IBM's LPARs,[9] Win4Lin 9x, Sun's Logical Domains, z/VM,[citation needed] and TRANGO.

Operating-system-level virtualization

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In operating-system-level virtualization, a physical server is virtualized at the operating system level, enabling multiple isolated and secure virtualized servers to run on a single physical server. The "guest" operating system environments share the same running instance of the operating system as the host system. Thus, the same operating system kernel is also used to implement the "guest" environments, and applications running in a given "guest" environment view it as a stand-alone system. The pioneer implementation was FreeBSD jails; other examples include Solaris Containers, OpenVZ, Linux-VServer, LXC, AIX Workload Partitions, Parallels Virtuozzo Containers, and iCore Virtual Accounts.

Hardware virtualization disaster recovery

A disaster recovery (DR) plan is good business practice for a hardware virtualization platform solution. DR of a virtualization environment can ensure high rate of availability during a wide range of situations that disrupt normal business operations. Continued operations of VMs is mission critical and a DR can compensate for concerns of hardware performance and maintenance requirements. A hardware virtualization DR environment involves hardware and software protection solutions based on business continuity needs, which include the methods described below.[10][11]

Tape backup for software data long-term archival needs
This common method can be used to store data offsite but can be a difficult and lengthy process to recover your data. Tape backup data is only as good as the latest copy stored. Tape backup methods will require a backup device and ongoing storage material.
Whole-file and application replication
The implementation of this method will require control software and storage capacity for application and data file storage replication typically on the same site. The data is replicated on a different disk partition or separate disk device and can be a scheduled activity for most servers and is implemented more for database-type applications.
Hardware and software redundancy
Ensures the highest level of disaster recovery protection for a hardware virtualization solution, by providing duplicate hardware and software replication in two distinct geographic areas.[12]

See also

<templatestyles src="Div col/styles.css"/>

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. [1] Profiling Energy Usage for Efficient Consumption; Rajesh Chheda, Dan Shookowsky, Steve Stefanovich, and Joe Toscano
  5. VMware server consolidation overview
  6. Examining VMware Dr. Dobb’s Journal August 2000 By Jason Nieh and Ozgur Can Leonard
  7. Uhlig, R. et al.; "Intel virtualization technology," Computer , vol.38, no.5, pp. 48-56, May 2005
  8. A Comparison of Software and Hardware Techniques for x86 Virtualization, Keith Adams and Ole Agesen, VMWare, ASPLOS’06 21–25 October 2006, San Jose, California, USA "Surprisingly, we find that the first-generation hardware support rarely offers performance advantages over existing software techniques. We ascribe this situation to high VMM/guest transition costs and a rigid programming model that leaves little room for software flexibility in managing either the frequency or cost of these transitions."
  9. Borden, T.L. et al.; Multiple Operating Systems on One Processor Complex. IBM Systems Journal, vol.28, no.1, pp. 104-123, 1989
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.

External links

el:Εικονικοποίηση es:Virtualización fr:Virtualisation ko:가상화 it:Virtualizzazione he:וירטואליזציה lt:Virtualizacija nl:Virtualisatie ja:仮想化 no:Virtualisering ru:Виртуализация simple:Virtualization sk:Virtualizácia fi:Virtualisointi sv:Virtualisering