Positions of the feet in ballet

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The positions of the feet in ballet is a fundamental part of classical ballet technique that defines standard placements of feet on the floor. There are five basic positions in modern-day classical ballet, known as the first through fifth positions. In 1725, dancing master Pierre Rameau credited the codification of these five positions to choreographer Pierre Beauchamp.[1] Two additional positions, known as the sixth and seventh positions, were codified by Serge Lifar in the 1930s while serving as Ballet Master at the Paris Opéra Ballet, though their use is limited to Lifar's choreographies.[2][3] The sixth and seventh positions were not Lifar's inventions, but revivals of positions that already existed in the eighteenth century, when there were ten positions of the feet in classical ballet.[4]

Five basic positions

The first basic position requires the feet to be flat on the floor and turned out (pointing in opposite directions as a result of rotating the legs at the hips).

First position

First position

Second position

Second position

The feet point in opposite directions, with heels spaced approximately twelve inches apart.

Third position

Third position

One foot is placed in front of the other so that the heel of the front foot is near the arch.

Fourth position

Open fourth position, with heels lined up, one directly in front of the other
Closed fourth position, with heel of each foot overlapping the toe of the other foot

There are two types of fourth position: open and closed. In both cases, one foot is placed approximately twelve inches in front of the other. In open fourth position the heels are aligned, while in closed fourth position the heel of the front foot is aligned with the toe of the back foot. There are two variations of each type of fourth position, determined by which foot is in front.

Fifth position

Fifth position

Fifth position should form two parallel lines with your feet. The heel of the front foot should be in contact with the big toe of the other, and the heel of the back foot should be in contact with the last toe of the front foot. (Poorly demonstrated in the picture provided)

Lifar's additional positions

Sixth position

Sixth position

Parallel feet, as in pas couru sur les pointes en avant or en arrière.

Seventh position

Seventh position

Similar to fourth position, but performed en pointe with heels in center with each other. There are two seventh positions, determined by whether the left or right foot is placed in front.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.

See also