SS-2 Sibling

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Soviet R-2 missile at Korolyov City of Moscow region.jpg
Soviet R-2 missile at Korolev City of Moscow region

The R-2 Short-range ballistic missile (NATO reporting name SS-2 Sibling, Soviet code 8Zh38) was developed based on the R-1 design. This was an improved version of the German V-2 rocket manufactured by the Soviet Union.

The R-1 was quickly followed by an evolutionary improvement, the R-2 (SS-2), which had a longer range and at least four major differences in design. The weight was increased by 50%, but the range was more than doubled, to 600 km (370 mi). R-2 had the following major differences from the R-1's (and hence from the V-2's) design:[1]

  • The warhead separated from the rocket prior to atmospheric reentry, eliminating the hull strength problem, one of the V-2/R-1's biggest weaknesses.
  • The propellant tank became the main load-bearing structure for the rocket, in contrast to the R-1's load-bearing hull. This reduced the overall weight of the spaceframe.
  • The control module was moved from above the propellant tank to below the LOx tank. This made pre-launch preparations easier. As the control module was now placed directly over the engine, vibrations were reduced by using steel instead of aluminium for the tailcone.
  • Radio command guidance was introduced to improve accuracy, giving the R-2 accuracy comparable to the R-1, in spite of its doubled range.

The first test flight of the R-2 took place in September 1949, and it was accepted for service in November 1951, actually entering service in large numbers around 1953. A grand total of 1,545 R-1 and R-2 missiles were produced.

The R-2 missile was the last Soviet missile based on German designs. While some German influences would clearly remain, Soviet missiles after the R-2 would be based on original designs by the OKB-1 group.

The R-2A geophysical rocket was developed for vertical sounding flights. It carried dogs, monkeys, hamsters, and various high-altitude physics experiments in its nose cone. Two pods performed atmospheric analysis and were ejected from the missile's side to avoid contamination by engine exhaust.

Operators

 Soviet Union

References

  1. (Russian) First Steps of the Domestic Rocket Construction

External links