Sherwood Park Freeway

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Alberta Highway 100 shield

Sherwood Park Freeway
Highway 100
Sherwood Park Freeway is located in Edmonton
Sherwood Park Freeway
Sherwood Park Freeway
Start/End points of Sherwood Park Freeway
Route information
Maintained by the City of Edmonton
& Alberta Transportation
Length: 7.1 km (4.4 mi)
Major junctions
West end: 71 Street in Edmonton
East end: Hwy 216 (Anthony Henday Drive)
Hwy 630 (Wye Road)
Location
Municipalities: Strathcona County
Major cities: Edmonton
Sherwood Park
Highway system
Provincial highways in Alberta
x20px Hwy 93 Hwy 201

Sherwood Park Freeway, a portion of which is designated Alberta Provincial Highway No. 100 by Alberta Transportation,[1][2] is a freeway in east Edmonton, Alberta, Canada.

At one point, it was part of Highway 14, but with the completion of the interchange at Highway 14 and Whitemud Drive, the designated route of Highway 14 was changed to follow Whitemud Drive to Calgary Trail. The former Highway 14 along the east edge of the city was renamed Highway 14X, and ultimately Highway 216 (Anthony Henday Drive), and the portion of the Sherwood Park Freeway within Strathcona County was designated Highway 100,[2] although no signs indicating such are posted along the road.

There are six interchanges on the freeway. The freeway begins just after 71 Street, with 82 (Whyte) Avenue and Argyll Road joining to become a freeway. To the east after the Highway 216 interchange, Sherwood Park Freeway continues as Wye Road through Sherwood Park, while the Highway 100 designation is dropped approximately 0.8 km east of this interchange.[3] Wye Road/Highway 630 continues through Sherwood Park and the balance of Strathcona County, eventually meeting up with Highway 14 west of Tofield. The boundary between the City of Edmonton and Strathcona County runs on the south side of the right of way from 34 Street to Highway 216.

Most of its length is scheduled to be improved, and widened, with completion scheduled for 2016.[4]

The official length of the Highway 100 is only 4.1 km, making it the second shortest non-lettered primary highway in Alberta after Highway 31. It is the only three-digit Alberta Primary Highway (1-216 Series) that is not a ring road.

Major intersections

Sherwood Park Freeway currently has six interchanges, giving it freeway status for the 7.2 km (4.5 mi) from 71 Street to Ordze Road.[5]

County km Intersecting road Current intersection type Coordinates
Continues as 82 (Whyte) Avenue
City of Edmonton 0.0 71 Street Traffic lights Lua error in package.lua at line 80: module 'strict' not found.
0.5 Argyll Road / 82 (Whyte) Avenue Y interchange
Westbound exit, eastbound entrance
Lua error in package.lua at line 80: module 'strict' not found.
1.4 50 Street Diamond interchange Lua error in package.lua at line 80: module 'strict' not found.
3.0 34 Street Diamond interchange
Alberta Highway 100.svg Hwy 100 begins[2]
Lua error in package.lua at line 80: module 'strict' not found.
Strathcona County 4.7 17 Street NW Diamond interchange under construction[6] Lua error in package.lua at line 80: module 'strict' not found.
5.7 76 Avenue Interchange permanently closed[6] Lua error in package.lua at line 80: module 'strict' not found.
6.3 Hwy 216 (Anthony Henday Drive) Cloverleaf interchange
Interchange replacement under construction[6]
Lua error in package.lua at line 80: module 'strict' not found.
7.1 Sherwood Park Freeway ends
Continues as Hwy 630 east (Wye Road)[3]
Lua error in package.lua at line 80: module 'strict' not found.
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Alberta Transportation. Highways Development and Protection Act, Appendix – Provincial Highways Designation Order.
  3. 3.0 3.1 Alberta Transportation (2010-01-01). Provincial Highway Designation – Highway 100.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. City of Edmonton map utility
  6. 6.0 6.1 6.2 Lua error in package.lua at line 80: module 'strict' not found.

External links