Skagit County, Washington

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Skagit County, Washington
Skagit County Courthouse 01.jpg
Skagit County Courthouse
Seal of Skagit County, Washington
Seal
Map of Washington highlighting Skagit County
Location in the U.S. state of Washington
Map of the United States highlighting Washington
Washington's location in the U.S.
Founded November 28, 1883
Named for Skagit tribes
Seat Mount Vernon
Largest city Mount Vernon
Area
 • Total 1,920 sq mi (4,973 km2)
 • Land 1,731 sq mi (4,483 km2)
 • Water 189 sq mi (490 km2), 9.8%
Population (est.)
 • (2014) 120,365
 • Density 70/sq mi (27/km²)
Congressional districts 1st, 2nd
Time zone Pacific: UTC-8/-7
Website www.skagitcounty.net

Skagit County /ˈskæt/ is a county in the U.S. state of Washington. As of the 2010 census, the population was 116,901.[1] The county seat and largest city is Mount Vernon.[2] The county was formed in 1883 from Whatcom County[3] and is named for the Skagit Indian tribe, which has been indigenous to the area prior to European-American settlement.

Skagit County comprises the Mount Vernon-Anacortes, WA Metropolitan Statistical Area, and is included in the Seattle-Tacoma, WA Combined Statistical Area. It is located in the Puget Sound region.

Geography

According to the U.S. Census Bureau, the county has a total area of 1,920 square miles (5,000 km2), of which 1,731 square miles (4,480 km2) is land and 189 square miles (490 km2) (9.8%) is water.[4] It is noted for its broad, fertile valley of the Skagit River, a center for cultivation of tulips and strawberries.

Geographic features

Skagit County Courthouse, Mount Vernon, Washington.
Fir-Conway Lutheran Church.

<templatestyles src="Div col/styles.css"/>

Adjacent counties

National protected areas

Demographics

Historical population
Census Pop.
1890 8,747
1900 14,272 63.2%
1910 29,241 104.9%
1920 33,373 14.1%
1930 35,142 5.3%
1940 37,650 7.1%
1950 43,273 14.9%
1960 51,350 18.7%
1970 52,381 2.0%
1980 64,138 22.4%
1990 79,555 24.0%
2000 102,979 29.4%
2010 116,901 13.5%
Est. 2014 120,365 [5] 3.0%
U.S. Decennial Census[6]
1790–1960[7] 1900–1990[8]
1990–2000[9] 2010–2014[1]

As of the census[10] of 2000, there were 102,979 people, 38,852 households, and 27,351 families residing in the county. The population density was 59 people per square mile (23/km²). There were 42,681 housing units at an average density of 25 per square mile (10/km²). The racial makeup of the county was 86.49% White, 0.44% Black or African American, 1.85% Native American, 1.49% Asian, 0.16% Pacific Islander, 7.17% from other races, and 2.40% from two or more races. 11.20% of the population were Hispanic or Latino of any race. 13.9% were of German, 11.2% English, 9.2% Norwegian, 8.2% Irish and 6.7% United States or American ancestry.

Three Salish Native American tribes have reservations in the county: the Swinomish, Upper Skagit, and Samish.

There were 38,852 households out of which 32.80% had children under the age of 18 living with them, 56.60% were married couples living together, 9.70% had a female householder with no husband present, and 29.60% were non-families. 23.30% of all households were made up of individuals and 10.00% had someone living alone who was 65 years of age or older. The average household size was 2.60 and the average family size was 3.06.

In the county, the population was spread out with 26.30% under the age of 18, 8.60% from 18 to 24, 26.90% from 25 to 44, 23.60% from 45 to 64, and 14.60% who were 65 years of age or older. The median age was 37 years. For every 100 females there were 98.00 males. For every 100 females age 18 and over, there were 95.70 males.

The median income for a household in the county was $42,381, and the median income for a family was $48,347. Males had a median income of $37,207 versus $26,123 for females. The per capita income for the county was $21,256. About 7.90% of families and 11.10% of the population were below the poverty line, including 13.50% of those under age 18 and 6.80% of those age 65 or over.

Government

Skagit County's government is headed by three commissioners, in the system laid out in the state constitution for all counties without charters. Commissioners are "nominated" in the primary by their district, but then are elected in the general by a county-wide vote. Commissioners are therefore said to represent the entire county, and not just their district.

The current Skagit County commissioners include Sharon Dillon, a Democrat from District 3, which encompasses Burlington east of Interstate 5, Sedro-Woolley, and the rest of eastern Skagit County; Ken Dahlstedt, a Democrat from District 2, which covers Mount Vernon, Conway, and south county; and Ron Wesen, a Republican from District 1, which includes Anacortes, La Conner, and that area of the county west of Interstate 5 and north of McLean Road.

County conservation efforts

In 2006, the Skagit County Marine Resources Committee commissioned a study to evaluate establishing one or more no-take marine reserves to protect rockfish and other groundfish from overfishing.[11]

Transportation

Skagit Transit provides bus service in Skagit County. It also provides connections to Everett, Bellingham, Whidbey Island and Camano Island. Skagit Transit also operates the Guemes Island ferry linking Anacortes, Washington to Guemes Island.

Major highways

Communities

Majestic Inn, Anacortes, Washington.
Skagit County farmland at the base of the Cascade Mountains, north of Darrington, Washington.

Cities

Towns

Census-designated places

<templatestyles src="Div col/styles.css"/>

Unincorporated communities

<templatestyles src="Div col/styles.css"/>

Reservations

Ghost Towns

See also

Footnotes

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

External links

Lua error in package.lua at line 80: module 'strict' not found.