South Branch Roaring Run
| South Branch Roaring Run | |
|---|---|
| Origin | valley to the southeast of South Mountain, in Noxen Township, Wyoming County, Pennsylvania |
| Mouth | Roaring Run in Forkston Township, Wyoming County, Pennsylvania Lua error in package.lua at line 80: module 'strict' not found. |
| Progression | Roaring Run → Bowman Creek → Susquehanna River → Chesapeake Bay |
| Length | 2.0 mi (3.2 km) |
| Source elevation | between 2,000 and 2,020 feet (610 and 616 m) |
| Mouth elevation | 1,112 ft (339 m) |
| Basin area | 3.31 sq mi (8.6 km2) |
South Branch Roaring Run is a tributary of Roaring Run in Wyoming County, Pennsylvania, in the United States. It is approximately 2.0 miles (3.2 km) long and flows through Noxen Township and Forkston Township.[1] The watershed of the stream has an area of 3.31 square miles (8.6 km2). The surficial geology in its vicinity consists of bedrock, Wisconsinan Till, Wisconsinan Bouldery Till, Wisconsinan Ice-Contact Stratified Drift, and alluvium. South Branch Roaring Run is classified as Class A Wild Trout Waters.
Contents
Course
South Branch Roaring Run begins in a valley in Noxen Township, to the southeast of South Mountain. It flows north-northeast for several tenths of a mile before turning northeast. After several tenths of a mile, the stream enters Forkston Township and turns east-northeast for several tenths of a mile. It then reaches its confluence with Roaring Run.[1]
South Branch Roaring Run joins Roaring Run 2.34 miles (3.77 km) upstream of its mouth.[2]
Hydrology
The concentration of alkalinity in South Branch Roaring Run is 5 milligrams per liter (0.0050 oz/cu ft).[3] Mehoopany Wind Energy, LLC once applied for and/or received a permit to discharge stormwater from construction work into the stream.[4]
Geography and geology
The elevation near the mouth of South Branch Roaring Run is 1,112 feet (339 m) above sea level.[5] The elevation of the stream's source is between 2,000 and 2,020 feet (610 and 616 m) above sea level.[1]
The valley of South Branch Roaring Run is located between South Mountain and Schooley Mountain.[6]
The surficial geology along the lower reaches of South Branch Roaring Run mainly consists of bedrock consisting of sandstone and shale. However, there is also alluvium, Wisconsinan Till, and Wisconsinan Ice-Contact Stratified Dirft in the area. Further upstream, the surficial geology in the stream's vicinity consists of Wisconsinan Bouldery Till, but there is bedrock and Wisconsinan Till in the area.[6]
Watershed
The watershed of South Branch Roaring Run has an area of 3.31 square miles (8.6 km2).[2] The stream is entirely within the United States Geological Survey quadrangle of Noxen.[5] The entire length of the stream is on private land that is closed to access.[3]
History
South Branch Roaring Run was entered into the Geographic Names Information System on August 2, 1979. Its identifier in the Geographic Names Information System is 1199564.[5]
Biology
Wild trout naturally reproduce in South Branch Roaring Run from its headwaters downstream to its mouth.[7] The stream is designated by the Pennsylvania Fish and Boat Commission as Class A Wild Trout Waters for brook trout from its headwaters downstream to its mouth.[3] The stream is classified as a High-Quality Coldwater Fishery and a Migratory Fishery.[4]
See also
- Newton Run, next tributary of Roaring Run going downstream
- List of rivers of Pennsylvania
- List of tributaries of Bowman Creek
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
