Umbilical cable

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

An umbilical cable or umbilical is a cable which supplies required consumables to an apparatus. It is named by analogy with an umbilical cord. An umbilical can for example supply air and power to a pressure suit or hydraulic power, electrical power and fiber optics to a subsea equipment.

Space suits

Early space suits used umbilicals, but modern designs carry their own temperature/humidity control, air supply and electric batteries.

Subsea

Subsea umbilicals are deployed on the seabed (ocean floor) to supply necessary control, energy (electric, hydraulic) and chemicals to subsea oil and gas wells, subsea manifolds and any subsea system requiring remote control, such as a remotely operated vehicle. Subsea intervention umbilicals are also used for offshore drilling or workover activities.

Diver

A diver's umbilical is a group of components which supply breathing gas and other services from the surface control point to a diver.

For shallow water surface supply air diving, the diver's umbilical is typically a 3-part umbilical comprising a gas hose, pneumofathometer ("pneumo") hose, and diver communications cable, which usually also serves as a lifeline strength member. The "pneumo" hose is open at the diver's end and connected to a pressure gauge on the surface gas panel, where the supervisor can use it to measure the diver's depth in the water at any time.

A 4-part diver umbilical will also have a hot water supply hose for the diver's exposure suit.

A 5-part diver umbilical will also include a video cable to allow the surface controller to see the video picture transmitted to the surface from the diver's hat camera (video camera mounted on the helmet, facing forward).

For saturation diving from a bell, a typical diver excursion umbilical may be an 8-part umbilical with a gas supply hose, gas reclaim hose, hot water hose, pneumo hose, tracking hose, comms/lifeline cable, video cable and hat light cable.

When there is risk of the umbilical cable being damaged by scratching on rock or coral, the umbilical bundle may be over-braided with a polypropylene braid cover.

Early diver umbilicals were simply the individual components bundled together and taped every metre or so with duct tape. These bundles tend to distort and produce kinks in the components caused by bending (particularly dangerous if the kink is in the divers gas supply hose), and require frequent maintenance.

More recent umbilicals comprise all the components laid together like a twisted rope, so that there is no chance of a kink, no separate lifeline component is required, and no tape is required to hold the umbilical together. An additional component such as a video cable for a diver's camera, or a hat light cable, can be added by manually wrapping this additional component into the lay of the existing cabled umbilical.

Rockets and Missiles

This term is also applied to the cables connecting a missile or space launch vehicle to ground support equipment before launch. These cables can carry electrical power, communications, propellants and pressurizing and purge gases to the launch vehicle and its payloads. They are automatically disconnected shortly before or at launch.

See also

References