.22 Long Rifle

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>


.22 Long Rifle (.22 LR)
.22 LR.jpg
.22 Long Rifle – subsonic hollow point (left), standard velocity (center), hyper-velocity "Stinger" hollow point (right)
Type Rimfire cartridge
Place of origin United States
Production history
Designer J. Stevens Arms & Tool Company
Designed 1887
Specifications
Parent case .22 Long[1]
Case type Rimmed, straight[1]
Bullet diameter 0.223 in (5.7 mm) - 0.2255 in (5.73 mm)[1]
Neck diameter .226 in (5.7 mm)[1]
Base diameter .226 in (5.7 mm)[1]
Rim diameter .278 in (7.1 mm)[1]
Rim thickness .043 in (1.1 mm)[1]
Case length .613 in (15.6 mm)[1]
Overall length 1.000 in (25.4 mm)[1]
Rifling twist 1:16"[1]
Primer type Rimfire[1]
Ballistic performance
Bullet weight/type Velocity Energy
40 gr (3 g) Solid[2] 1,200 ft/s (370 m/s) 104 ft·lbf (141 J)
38 gr (2 g) Copper-plated HP[2] 1,260 ft/s (380 m/s) 134 ft·lbf (182 J)
31 gr (2 g) Copper-plated HP[2] 1,430 ft/s (440 m/s) 141 ft·lbf (191 J)
30 gr (2 g) Copper-plated RN[3] 1,750 ft/s (530 m/s) 204 ft·lbf (277 J)
32 gr (2 g) Copper-plated HP[3] 1,640 ft/s (500 m/s) 191 ft·lbf (259 J)
Source(s): [2][3]

The .22 Long Rifle rimfire (metric designation: 5.6×15mmR) cartridge is a long-established variety of ammunition, and in terms of units sold is still by far the most common in the world today.

The cartridge is often referred to simply as .22 LR ("twenty-two-/ˈɛl/-/ˈɑːr/") and various rifles, pistols, revolvers, and even some smoothbore shotguns have been manufactured in this caliber. The cartridge originated from the Flobert BB cap of 1845 through the .22 Smith & Wesson cartridge of 1857, and was developed by the American firearms manufacturer J. Stevens Arms & Tool Company in 1887[4] by combining the casing of the .22 Long with the 40-grain (2.6 g) bullet of the .22 Extra Long. For many decades, it has been a very popular cartridge around the world. It is one of the few cartridges that are accepted by a large variety of rifles, as well as pistols. The .22 Long Rifle and related cartridges (.22 Short, .22 Long, and .22 Extra Long) use a heeled bullet, which means that the bullet is the same diameter as the case, and has a narrower "heel" portion that fits in the case.

Popularity

Low cost, minimal recoil, and relatively low noise make the .22 LR an ideal cartridge for recreational shooting, initial firearms training, small-game hunting and pest control. Used by Boy Scouts for the rifle shooting merit badge, the .22 LR is popular among novice shooters and experts alike. The rimfire round is commonly packaged in boxes of 50 or 100 rounds, and is often sold by the 'brick', a carton containing either 10 boxes of 50 rounds or loose cartridges totaling 500 rounds, or the 'case' containing 10 bricks totaling 5,000 rounds.

A wide variety of rimfire ammunition is available commercially, and the available ammunition varies widely both in price and performance. Bullet weights among commercially available ammunition range from 20 to 60 grains (1.3 to 3.9 g), and velocities vary from 575 to 1,750 ft/s (175 to 533 m/s). Promotional loads for plinking can be purchased in bulk for significantly less cost than precision target rounds. The low cost of ammunition has a substantial effect on the popularity of the .22 LR. For this reason, rimfire cartridges are commonly used for target practice.

The low recoil of the cartridge makes it ideal for introductory firearms courses. Novice shooters can be surprised or frightened by the recoil of more powerful rounds. Beginners shooting firearms beyond their comfort level frequently develop a habit of flinching in an attempt to counter anticipated recoil. The resulting habit impedes correct posture and follow-through at the most critical phase of the shot and is difficult to correct. With high recoil eliminated, other errors in marksmanship technique are easier to identify and correct.

Available for this round are AR-15 upper receivers and M1911 slide assemblies. Many handgun manufacturers have an upper pistol conversion kit to make it shoot .22 ammunition. These rimfire conversions allow shooters to practice inexpensively while retaining the handling characteristics of their chosen firearms (with reduced recoil and muzzle blast). Additionally, .22 conversion kits allow practice at indoor ranges which prohibit high-power firearms. The enjoyment of shooting a high powered pistol converted to low energy .22 rounds is cited among the reasons for the conversion kits, in addition to lower ammunition costs. Owners of guns that use gas systems, such as AR-15 sport style rifles, normally avoid firing non-jacketed .22LR ammunition, as the use of unjacketed ammunition may lead to lead fouling of the gas port inside the barrel and costly gunsmithing procedures.

Annual production is estimated at 2–2.5 billion rounds.[5][6]

Performance

Two .22 LR rounds compared to a .45 ACP cartridge

Performance varies between barrel length and the type of action. For example, bolt-action rifles may perform differently from semiautomatic rifles. The .22 LR is effective to 150 yd (140 m), though practical ranges tend to be less. After 150 yd, the ballistics of the round are such that it will be difficult to compensate for the large "drop". The relatively short effective range, low report, and light recoil has made it a favorite for use as a target-practice cartridge. The accuracy of the cartridge is good, but not exceptional; various cartridges are capable of the same or better accuracy. A contributing factor in rifles is the transition of even a high-velocity cartridge projectile from supersonic to subsonic within 100 yd (91 m). As the bullet slows, the shock wave caused by supersonic travel overtakes the bullet and can disrupt its flight path, causing minor but measurable inaccuracies.[citation needed]

When zeroed for 100 yd (91 m), the arc-trajectory of the standard high-velocity .22 LR with a 40-gr bullet has a 2.7-inch (69 mm) rise at 50 yd (46 m), and a 10.8-inch (27 cm) drop at 150 yd (140 m).[7] A .22 LR rifle needs to be zeroed for 75 yd (69 m) to avoid overshooting small animals like squirrels at intermediate distances.[7]

As a hunting cartridge, rimfires are mainly used to kill small game. It is highly effective on squirrels and rabbits at distances closer than 150 yd and on ground hogs, marmots, and foxes closer than 80 yd (73 m). It has been successfully used on larger animals such as coyotes, but range is generally limited to no farther than 65 yd (59 m); head and chest shots are preferred with the most powerful .22 cartridge the hunter can use accurately.

Because a .22 LR bullet is less powerful than larger cartridges, its danger to humans is often underestimated. In fact, a .22 LR bullet is capable of inflicting very serious injuries (e.g. the four people wounded, one mortally, during the Reagan assassination attempt) or death e.g. the Kauhajoki school shooting (11 killed and one wounded), the Jokela school shooting (eight killed and one wounded), and the 1979 Cleveland Elementary School shooting (two killed and nine wounded), as well as the assassination of Robert F. Kennedy. Numerous other shooting incidents have demonstrated that .22 LR bullets can easily kill or seriously injure humans.[8][9][10] Even after flying 400 yd (370 m), a .22 bullet is still traveling about 500 ft/s (150 m/s). Ricochets are more common in .22 LR projectiles than for more powerful cartridges as the combination of unjacketed lead and moderate velocities allows the projectile to deflect – not penetrate or disintegrate – when hitting hard objects at a glancing angle. A .22 LR can ricochet off the surface of water at a low angle of aim. Severe injury may result to a person or object in the line of fire on the opposite shore, several hundred yards away.[11]

Rimfire bullets are generally either plain lead (for standard-velocity loads) or plated with copper or gilding metal (for high-velocity or hyper-velocity loads). The thin copper layer on the bullet functions as a high-velocity lubricant reducing friction between the bullet and the barrel, thus reducing barrel wear. It also prevents oxidation of the lead bullet. Lead tends to oxidize if stored for long periods. Oxide on the bullet's surface could increase its diameter enough to either prevent insertion of the cartridge into the chamber, or – with hyper-velocity rounds – cause dangerously high pressures in the barrel, potentially rupturing the cartridge case and injuring the shooter. Standard and subsonic cartridges use a wax lubricant on lead bullets for the same purpose at lower velocities.

Variants

The variety of .22 LR loads are often divided into four distinct categories, based on nominal velocity:

  • Subsonic, which also includes "target" or "match" loads, at nominal speeds below 1,100 ft/s (340 m/s)
  • Standard-velocity: 1,000–1,135 ft/s (305–346 m/s), common velocities are around 1,125 ft/s (343 m/s)
  • High-velocity: 1,200–1,310 ft/s (370–400 m/s) per second
  • Hyper-velocity, or ultra-velocity: over 1,400 ft/s (430 m/s)

Subsonic

Lua error in package.lua at line 80: module 'strict' not found.

The subsonic Aguila Super Colibri
.22 caliber Aguila Sniper Sub-Sonic (right) with .22 long rifle for comparison

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Subsonic rounds have a muzzle velocity of about 1,080 ft/s (330 m/s), less than the speed of sound. These rounds are sometimes equipped with extra-heavy bullets of 46–61-grain (3.0–4.0 g) to improve the terminal ballistics of the slower projectile. Conversely, these rounds may contain little more than a primer and an extra-light bullet.

Subsonic rounds are favored by some shooters due to slightly superior accuracy and reduction in noise. Supersonic rounds produce a loud crack which can scare away animals when hunting. Accuracy is reportedly improved with subsonic rounds because a supersonic bullet (or projectile) that slows from supersonic to subsonic speed undergoes drastic aerodynamic changes in this transonic zone that might adversely affect the stability and accuracy of the bullet.

Because the speed of sound in air at 68 °F (20 °C) is about 1,115 ft/s (340 m/s), the subsonic round's muzzle velocity is slightly below the speed of sound under many hunting conditions. However, under cold air conditions at 32 °F (0 °C), the speed of sound drops to 1,088 ft/s (332 m/s), approximately muzzle velocity. Hence, a "subsonic" round used below this temperature may be supersonic, and during the transition from supersonic to subsonic velocity, it may become unstable, reducing accuracy. To counteract this, some cartridge manufacturers have lowered the speed of their subsonic ammunition to 1,030 ft/s (310 m/s) or less.

Various combinations of subsonic rounds and semiautomatic .22 LR firearms result in unreliable cycling of the firearms' actions, as the result of insufficient recoil energy. Some subsonic rounds use heavier bullets (achieving lower velocities) to ensure, as a result of increased bullet mass, enough energy is produced to cycle common blow-back actions. As an example, the Aguila .22 LR SSS "Sniper SubSonic" round, has a 60-gr bullet on a .22 short case, providing the cartridge the same overall dimensions as a .22 long rifle round. However, other problems may be encountered: the heavier and longer bullet of the Aguila cartridge requires a faster barrel twist (by the Greenhill formula) to ensure the bullet remains stable in flight.

Two performance classes of .22 rimfire subsonic rounds exist. Some subsonic rounds, such as various .22 short and .22 long "CB" rounds, give about 700 ft/s (210 m/s) velocity with a 29-gr bullet providing relatively low impact energy. These may not use any, or only small amounts of gunpowder, and have the characteristics of rounds intended only for indoor training or target practice rather than hunting. Where these are in .22 LR form, it is only to aid feeding in firearms designed for the cartridge, rather than older .22 CB shooting gallery rifles. The Aguila SSS gives about 950 ft/s (290 m/s) velocity with a 60-gr bullet offering energy equivalent to many high velocity .22 long rifle rounds using standard 40-gr bullets. Other heavy-bullet subsonic rounds give similar performance, and are intended for hunting of small game, or control of dangerous animals, while avoiding excessive noise.

Standard velocity

Schlieren high-speed video of a .22LR travelling in free-flight demonstrating the air pressure dynamics surrounding the bullet

Standard-velocity rounds have a slightly supersonic muzzle velocity of around 1,125 ft/s (343 m/s), and a "normal" bullet weight of 40 gr (2.6 g). Standard-velocity cartridges generate near or slightly supersonic velocities. These rounds generally do not develop these velocities in handguns because their short barrels do not take full advantage of the slower powder.

High velocity

High-velocity, copper-plated .22 LR rounds

The .22 long rifle round was originally loaded with black powder. The first smokeless powder loads were intended to match the standard velocity of the original black-powder rounds. Smokeless powder is more efficient than black powder, and the cartridge cases could hold more powder. Smokeless powder loads, called "high speed" or "high velocity", were offered by the major ammunition makers, giving a typical velocity increase of 20% (1,200 feet per second (370 m/s) to 1,300 feet per second (400 m/s)) while still using the standard 40-gr solid or 36-gr hollow-point lead bullet.

Hyper-velocity

Many .22 LR cartridges use bullets lighter than the standard 40 gr, fired at even higher velocities. Hyper-velocity bullets usually weigh around 30 to 32 gr (1.9 to 2.1 g) and can have a muzzle velocity of 1,400 to 1,800 feet per second (430 to 550 m/s). This higher velocity is partially due to the use of lighter bullets.

The CCI Stinger was the first hyper-velocity .22 LR cartridge, and provided a significant increase in velocity and energy over standard rimfire rounds. The Stinger case is longer than that of the long rifle (about .71 in (18 mm) versus .595 in (15.1 mm) for the long rifle), but the plated hollow point bullet is lighter and shorter at 32 gr (2.1 g), giving the same overall length as the long rifle cartridge. (This longer case can cause ejection problems in some guns.) A powder with a slower burning rate is used to make the most use of the length of a rifle barrel.[citation needed] Most .22 long rifle powders increase velocity up to about 19 in (480 mm) of barrel length; the powder used in the Stinger increases velocity up to the longest .22 barrel length tested by the NRA, 26 in (660 mm).[citation needed]

Later hyper-velocity rounds were introduced by other makers, based on the long rifle case with lighter bullets in the 30-gr weight range and slow-burning rifle powder loadings. The overall length of many of these cartridges was less than the overall length of the standard long rifle cartridge.[citation needed] One example is the Remington Viper; another is the Federal Spitfire.

The CCI Velocitor hyper-velocity round uses the standard long rifle case size and a standard weight 40 gr (2.6 g) bullet of proprietary hollow-point design to augment expansion and trauma. This cartridge has a muzzle velocity of 1,435 ft/s (437 m/s). Due to the better ratio of bullet mass to air resistance, the Velocitor may perform better at longer range compared to the light bullets of other hyper-velocity rounds.[citation needed]

Shot cartridges

Special .22 LR caliber shot cartridges, usually loaded with No. 12 shot, have also been made. These are often called "rat-shot" or "snake-shot" due to their use in very short range pest control. Such rounds have either a longer brass case that is crimped closed, or a translucent plastic "bullet" that contains the shot and shatters upon firing. In specially made .22-bore shotguns, the shot shells can be used for short-range skeet shooting and trap shooting at special, scaled-down, clay targets.

Full metal jacket

During World War II, a full-metal-jacketed version of the .22 LR was developed for the suppressed High Standard HDM pistol.[12]

Tracer

Tracer ammunition is also available in rimfire.[13]

Cartridge construction

The standard .22 rimfire cartridges (BB, CB, short, long, and long rifle) differ in construction from most other cartridges in the way the bullet is constructed and held in the case. In most cartridges, the bullet is inserted completely within the "neck" of the cartridge case, being held in place by tension from the case neck around the bullet-bearing surface and, in some cases, a small crimp at the very top of the case around a cannelure (groove) in the bullet. Bullets for the standard .22 RF (does not include the .22 Magnum or .22 WRF/.22 Remington Special) are constructed with a "heel" (stem) on the rear of the bullet which is inserted into case and the case mouth is then crimped around that stem, leaving the majority of the bullet-bearing surface exposed and making the diameter of the case and the bullet the same.

The .22 WMR case diameter is larger than the bullet. This construction method has an inherent weakness in that it provides only minimal protection for the cartridge from exposure to moisture or other elements that adversely affect ammunition reliability. Overall reliability of today's rimfire ammunition is extremely high, but is still considerably lower than centerfire ammunition.

Cartridge length

A .22 short, .22 LR, .22 Winchester Magnum, and a .22 Hornet

The .22 LR uses a straight-walled case. Depending upon the type and the feed mechanism employed, a firearm which is chambered for .22 LR may also be able to safely chamber and fire the following shorter rimfire cartridges:

  • .22 BB, in cap, short, and long lengths
  • .22 CB, in cap, short, long, and long rifle lengths
  • .22 short
  • .22 long

The .22 long rifle may also be used in firearms chambered for the obsolete .22 extra long.

Usage

Today, rimfire rounds are mainly used for hunting small pests, for sports shooting, for plinking, and for inexpensive training. The .22 LR is the choice for several shooting events: bullseye, plus divisions of metallic silhouette and pin shooting, most high school, collegiate, Boy Scouts of America, Project Appleseed, 4H shooting events, and many others. It is also used in the precision Rifle and Pistol shooting events at the Olympic Games. Good quality rimfire ammunition can be quite accurate. The main advantages are low cost, low recoil, low noise and high accuracy-to-cost ratio. The main disadvantage is its low power; it is better suited for use on small game and other small animals.[14] As a defensive cartridge, it is considered inadequate, though the small size allows very lightweight, easily concealable handguns which can be carried in circumstances where anything larger would be impractical. Despite their limitations, people can use .22 LR pistols and rifles to kill, and are common simply because they are prevalent, inexpensive, and widely available.

Most semi-automatic rifles firing .22 LR cartridges will often only work properly when firing standard or high velocity rimfire ammunition, as the low recoil of subsonic rounds is insufficient to cycle the weapon's action. Rifles with manual actions do not have this problem. Due to the low bolt thrust of the .22 LR cartridge, most self-loading firearms chambered for the cartridge use the direct blowback operation system.

The tiny case of the .22 LR and the subsonic velocities (when using subsonic ammunition) make it well suited for use with a firearm suppressor (also known as silencers or sound moderators). The low volume of powder gases means that .22 LR suppressors are often no larger than a bull barrel; the Ruger 10/22 and Ruger MK II are common choices, because of their reliability and low cost, and the resulting product is often nearly indistinguishable from a bull barrel model (although weighing far less). Where firearm suppressors are only minimally restricted, a .22 LR firearm with a suppressor is often favored for plinking, as it does not require hearing protection or disturb the neighbors. Local government agencies sometimes use suppressed rimfire weapons for animal control, since dangerous animals or pests can be dispatched in populated areas without causing undue alarm.

The .22 LR has also seen limited usage by police and military snipers. Its main advantage in this role is its low noise, but it is usually limited to urban operations because of its short range.[15]

The Israeli military used a suppressed .22 LR rifle in the 1990s for riot control and to "eliminate disturbing dogs prior to operations", though it is now used less often as it has been shown to be more lethal than previously suspected.[15] Some other examples include the use of suppressed High Standard HDM pistols by the American OSS, which was the predecessor organization of the CIA.[12] Francis Gary Powers was issued a suppressed High Standard for the flight in which he was shot down. Suppressed Ruger MK II pistols were used by the US Navy SEALs in the 1990s.[16]

Cartridge dimensions

.22 long rifle cartridge dimensions in inches

22 Long Rifle cartridge.svg

.22 long rifle maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).[17]

The common rifling twist rate for this cartridge is 406 mm (1:16 in), six grooves, land width = 2.16 mm, Ø lands = 5.38 mm, Ø grooves = 5.58 mm.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) rulings the .22 long rifle can handle up to 170.00 MPa (24,656 psi) Pmax piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.

Because the .22 long rifle round commonly uses a heeled lead or lightly plated bullet, the nominal bullet diameter is larger than the nominal bore diameter to prevent excessive lead fouling that can occur when shooting lead bullets that are the same or slightly smaller than the groove diameter. SAAMI specifies a nominal bullet diameter of 0.2255 with a tolerance of -0.004, while the specified bore diameter is 0.222.[18] In practice, 0.224 or slightly larger bullets are common, with barrel groove diameters commonly around 0.223.

Muzzle velocity (nominal)

  • 40-grain (2.6 g) lead: 1,082 ft/s (330 m/s) .22 LR subsonic
  • 36-grain (2.3 g) copper plated lead: 1,328 ft/s (405 m/s) .22 LR high velocity

Note: actual velocities are dependent on many factors, such as barrel length of a given firearm and manufacturer of a given batch of ammunition, and will vary widely in practice. The above velocities are typical.

See also

References

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 SAAMI/ANZI. "American National Standard Z299.1-1992." SAAMI (Newtown, Connecticut USA) November 24, 1992.
  2. 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 Simpson,Rich. "Remove pesky rodents with sure-shot rimfire rifles". Times-News (Twin Falls, Idaho, USA) March 28, 2008.
  4. Kokalis, Peter: Weapons Tests and Evaluations: The Best of Soldier of Fortune, page 331. Paladin Press, 2001. ISBN 978-1-58160-122-0
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. C.I.P. TDCC datasheet .22 Long Rifle
  18. Lua error in package.lua at line 80: module 'strict' not found.

External links