AMX-40

From Infogalactic: the planetary knowledge core
(Redirected from AMX 40)
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

AMX-40
300px
AMX-40 prototype at the Musée des Blindés at Saumur
Type Main battle tank
Place of origin France
Production history
Designed 1983
Manufacturer AMX-APX and GIAT
Specifications
Weight 43.7 t (43.0 long tons; 48.2 short tons)
Length 10.04 m (32 ft 11 in) (with gun barrel), 6.8 m (22 ft 4 in) hull
Width 3.18 m (10 ft 5 in) 3.36 m (11 ft 0 in) (with side skirts)
Height 2.38 m (7 ft 10 in)
Crew 4

Main
armament
120 mm GIAT G1 smoothbore gun (L/52) (40 rounds)
Secondary
armament
1 x 20 mm M693 autocannon with 578 rounds 2 x 7.62 mm ANF1 machine guns (2170 rounds)
Engine Poyaud V12X diesel engine
1,100 horsepower (820 kW)
Power/weight 25.6 hp/ton
Transmission ZF LSG 300
Suspension torsion bar with rotary shock absorbers
Fuel capacity 1300 L
Operational
range
600 km (370 mi)
Speed 70 km/h (43 mph)

The AMX-40 was a French prototype main battle tank.

History

Early History

As the AMX-32 had failed to attract any potential sales, GIAT decided to produce yet another upgrade; this was the AMX-40 Main Battle Tank. The development of the AMX-40 began in 1980 as a clean sheet design. In 1983, the first prototype was finished and presented at the Satory Exhibition that year. Two further prototypes were produced in 1984; the fourth and last one was fabricated in 1985. The design was not intended for service in France, but as a successor to the AMX-32, the improved export version of the AMX-30. However, the efforts to obtain foreign orders failed, the most serious potential customer to have considered the design being Spain. It ceased being offered for export in 1990.

Configuration

The tank was of fairly standard configuration, with the driver at the front, the turret in the center, housing a gunner, commander and loader, and the engine at the rear. Its armament consisted of a 120 millimetre calibre smoothbore gun, with an optional coaxial 20 millimetre calibre F2 autocannon. The fire control system was the COTAC also used for the AMX-30 B2. As its dimensions were rather small: 6.8 metres (22 ft 4 in) long, 3.36 m (11 ft 0 in) wide and 2.38 m (7 ft 10 in) high at the turret roof, the ammunition load was limited to just 35 rounds. The tank was powered by a 1,100 horsepower (820 kW) Poyaud V12X diesel engine coupled to an automatic ZF transmission. The number of road wheels per side was increased from the five used on the AMX-32 to six.

Construction

The weight was limited to 43 metric tonnes. Though this, in combination with the powerful engine, ensured an excellent mobility, with 70 kilometres per hour (43 mph) maximum road speed and 50 km/h (31 mph) cross country speed, and a low operating cost, it limited protection. The front armour utilised laminated and perforated steel and protected against 100 millimetres (3.9 in) HEAT and APDS ammunition. Such 400 to 450 mm (15.7 to 17.7 in) RHA equivalency would have been considered quite formidable in 1980; in the late eighties, it had become substandard due to missile and ammunition developments.

See also

External links

  • Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  • Military Today - AMX-40
  • Forty, George. "The Illustrated Guide to Tanks of the World." Hermes House. 2005.