Analytical dynamics

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

In classical mechanics, analytical dynamics, or more briefly dynamics, is concerned about the relationship between motion of bodies and its causes, namely the forces acting on the bodies and the properties of the bodies (particularly mass and moment of inertia). The foundation of modern-day dynamics is Newtonian mechanics and its reformulation as Lagrangian mechanics and Hamiltonian mechanics.[1][2]

History

The field has a long and important history, as remarked by Hamilton: "The theoretical development of the laws of motion of bodies is a problem of such interest and importance that it has engaged the attention of all the eminent mathematicians since the invention of the dynamics as a mathematical science by Galileo, and especially since the wonderful extension which was given to that science by Newton." William Rowan Hamilton, 1834 (Transcribed in Classical Mechanics by J.R. Taylor, p. 237[3])

Some authors (for example, Taylor (2005)[3] and Greenwood (1997)[4]) include special relativity within classical dynamics.

Relationship to statics, kinetics, and kinematics

Historically, there were three branches of classical mechanics:

  • "statics" (the study of equilibrium and its relation to forces)
  • "kinetics" (the study of motion and its relation to forces).[5]
  • "kinematics" (dealing with the implications of observed motions without regard for circumstances causing them).[6]

These three subjects have been connected to dynamics in several ways. One approach combined statics and kinetics under the name dynamics, which became the branch dealing with determination of the motion of bodies resulting from the action of specified forces;[7] another approach separated statics, and combined kinetics and kinematics under the rubric dynamics.[8][9] This approach is common in engineering books on mechanics, and is still in widespread use among mechanicians.

Fundamental importance in engineering, diminishing emphasis in physics

Today, dynamics and kinematics continue to be considered the two pillars of classical mechanics. Dynamics is still included in mechanical, aerospace, and other engineering curricula because of its importance in machine design, the design of land, sea, air and space vehicles and other applications. However, few modern physicists concern themselves with an independent treatment of "dynamics" or "kinematics," nevermind "statics" or "kinetics." Instead, the entire undifferentiated subject is referred to as classical mechanics. In fact, many undergraduate and graduate text books since mid-20th century on "classical mechanics" lack chapters titled "dynamics" or "kinematics."[3][10][11][12][13][14][15][16][17] In these books, although the word "dynamics" is used when acceleration is ascribed to a force, the word "kinetics" is never mentioned. However, clear exceptions exist. Prominent examples include The Feynman Lectures on Physics.[18]

List of Fundamental Dynamics Principles

Axioms and mathematical treatments

Related engineering branches

Related subjects

References

  1. Chris Doran; Anthony N. Lasenby (2003). Geometric Algebra for Physicists. Cambridge University Press. p. 54. ISBN 0-521-48022-1.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  2. Cornelius Lanczos (1986). The variational principles of mechanics (Reprint of 4th Edition of 1970 ed.). Dover Publications Inc. pp. 5–6. ISBN 0-486-65067-7.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  3. 3.0 3.1 3.2 John Robert Taylor (2005). Classical Mechanics. University Science Books. ISBN 978-1-891389-22-1.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  4. Donald T Greenwood (1997). Classical Mechanics (Reprint of 1977 ed.). Courier Dover Publications. p. 1. ISBN 0-486-69690-1.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  5. Thomas Wallace Wright (1896). Elements of Mechanics Including Kinematics, Kinetics and Statics: with applications. E. and F. N. Spon. p. 85.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  6. Edmund Taylor Whittaker (1988). A Treatise on the Analytical Dynamics of Particles and Rigid Bodies: With an Introduction to the Problem of Three Bodies (Fourth edition of 1936 with foreword by Sir William McCrea ed.). Cambridge University Press. p. Chapter 1, p. 1. ISBN 0-521-35883-3.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  7. James Gordon MacGregor (1887). An Elementary Treatise on Kinematics and Dynamics. Macmillan. p. v.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  8. Stephen Timoshenko; Donovan Harold Young (1956). Engineering mechanics. McGraw Hill.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  9. Lakshmana C. Rao; J. Lakshminarasimhan; Raju Sethuraman; Srinivasan M. Sivakumar (2004). Engineering mechanics. PHI Learning Pvt. Ltd. p. vi. ISBN 81-203-2189-8.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  10. David Hestenes (1999). New Foundations for Classical Mechanics. Springer. p. 198. ISBN 0-7923-5514-8.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  11. R. Douglas Gregory (2006). Classical Mechanics: An Undergraduate Text. Cambridge University Press. ISBN 978-0-521-82678-5.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  12. Landau, L. D.; Lifshitz, E. M.; Sykes, J.B.; Bell, J. S. (1976). "Mechanics". 1. Butterworth-Heinemann. ISBN 978-0-7506-2896-9. Cite journal requires |journal= (help)<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  13. Jorge Valenzuela José; Eugene Jerome Saletan (1998). Classical Dynamics: A Contemporary Approach. Cambridge University Press. ISBN 978-0-7506-2896-9.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  14. T. W. B. Kibble, Frank H. Berkshire (2004). Classical Mechanics. Imperial College Press. ISBN 978-1-86094-435-2.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  15. Walter Greiner; S. Allan Bromley (2003). Classical Mechanics: Point Particles and Relativity. Springer. ISBN 978-0-387-95586-5.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  16. Gerald Jay Sussman; Jack Wisdom Meinhard; Edwin Mayer (2001). Structure and Interpretation of Classical Mechanics. MIT Press. ISBN 978-0-262-19455-6.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  17. Harald Iro (2002). A Modern Approach to Classical Mechanics. World Scientific. ISBN 978-981-238-213-9.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  18. Feynman, RP; Leighton, RB; Sands, M (2003). The Feynman Lectures on Physics. Vol. 1 (Reprint of 1963 lectures ed.). Perseus Books Group. p. Ch. 9 Newton's Laws of Dynamics. ISBN 0-7382-0930-9.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>